Question about 2004 Chevrolet Silverado 1500 Crew Cab

Open Question

The drivers heated seat wont stay on i hear clicking

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 92 Answers

SOURCE: heated driver seat doesn't heat on 2003 ford explorer

this is a common problem if you use the seat heater alot.one or both of the seat heater elements will have burned up or broken.where i live it is very cold most of the time and i have replaced hundreds of the seat heater elements.it is rare for it not to be one or both of the elements.

Posted on Nov 14, 2008

  • 2 Answers

SOURCE: 2005 Buick LeSabre heated seat not working

The heated seats have relays that run them. Not quite sure where they are located but. That noise is the relay clicking on and off. They are actually pretty loud. Look for faulty connections to and from the relay and check battery power to both sides of the relay.

Posted on Feb 24, 2009

  • 3 Answers

SOURCE: Driver Heated Seat 03 Suburban

Identical thing here with my '03 Surburban LT.

Posted on Aug 02, 2009

  • 10 Answers

SOURCE: 2004 chevy. Heated seats will not stay on.

See GM TSB 05-08-143-001, If you have Adjustable pedals, especially if they dont; work with the memeory buttons, but function with thier own buttons. Its the Brake Pedal Position Sensor is shorted and mesing up the seat module which controls the heaters too. My 05 Suburban had the same issue.

Posted on Dec 11, 2009

  • 169 Answers

SOURCE: Drivers side heated seat controls only. When

There is a drivers and passengers door/seat controll module. These have been failing a lot. dealers stock them now. The element in the seat can also be bad. I recommend taking it to the dealer as painfull as that may sound but they will diagnose it properly because they have to command it on and off with a scantool. Sorry for the bad news. The modules aren"t cheap and the element is difficult to replace. It is worth the 80.00 it will cost you to find out. Good luck

Posted on Jan 05, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2010 Lincoln MKS Heated Seat on driver's side stopped working (Light in button turns off on its' own)


The most common cause of this problem is that the drivers seat heater grid is open or burned out. That is based on 25 years as a Ford dealer technician.

Feb 27, 2017 | Lincoln Cars & Trucks

1 Answer

My 04 navigator left power seat wont move any direction and pedal adjust wont move...there is a clicking sound coming from a black box under seat but no function


it does not appear that the driver seat or adjustable pedal share anything in common

furthermore, the sound you hear clicking may be the actual seat motor trying to work, but lets do a quick test

try to move the seat up/down, forward/back and any combination. If while holding the button in said position and you consistently hear the clicking sound that follow the sound and touch the motor under your seat. If you feel the "clicking" then your seat motor is bound or siezed and will need repair.

if instead you just hear one click then you might be experiencing a relay problem

As for the pedal adjustment... have you checked fuse #109 (30A) @ the CJB (Central Junction Box) behind the right kick panel?

Apr 10, 2010 | 2005 Lincoln Navigator

1 Answer

The drivers seat will not stay on. I replaced the


its only a guess alot of times even the dealer cant find out what the problem is and they just keep trying parts till they get it to work

Jan 21, 2010 | 2003 Chevrolet Tahoe

1 Answer

Drivers side heated seat controls only. When turning on the heated seat controls for either switch on the drivers side all lights flash then turn off instantly. I can hear a relay clicking each time I push...


There is a drivers and passengers door/seat controll module. These have been failing a lot. dealers stock them now. The element in the seat can also be bad. I recommend taking it to the dealer as painfull as that may sound but they will diagnose it properly because they have to command it on and off with a scantool. Sorry for the bad news. The modules aren"t cheap and the element is difficult to replace. It is worth the 80.00 it will cost you to find out. Good luck

Jan 05, 2010 | 2003 GMC Yukon Denali

2 Answers

FRONT HEATED SEATS


you need to check the resistance in each of the heated seat elements in the seat. There's a two wire connector under the back of each front seat. The connector should be green. disconnect it and measure the resistance along the circuit going into the seat. if it isnt .1 - .3 ohms, replace the appropriate heated seat element

Jan 04, 2010 | 2004 Cadillac Escalade

1 Answer

Drivers seat controls do not work. drivers window should go up when door is shut after exiting car, instead it stays down a few inches.


The drivers seat problem is MOST likely A module located on the floor under the seat. You can check it by swapping with the right seat module. For the window problem--- With the engine running, run the window all the way down and hold it untill you hear a click (about 3-5 seconds) then run it all the way up and hold it untill you hear a click again. This sould reset the memory and it should work properly.

Nov 21, 2009 | 1997 Jaguar XK8

2 Answers

Driver Heated Seat 03 Suburban


Identical thing here with my '03 Surburban LT.

Mar 07, 2009 | 2003 Chevrolet Silverado 2500HD

1 Answer

Driver Heated Seat 03 Suburban


The most likely failure point is the driver heated seat elements. They probably have excessive resistance and once they warm up a little they short out the module and it defaults to not working. I would recommend replacing both upper and lower driver seat elements.

Aug 12, 2008 | 2003 Chevrolet Suburban

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

51 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...