Question about Cars & Trucks

1 Answer

Vsc & check engine light on. Code reads cylinder 2 misfire I have changed the plugs swaped coil with another cylinder swaped vsv's swaped injector plugs with another cylinder always shows misfire #2 cylinder. Engine only skips at idle when accelerated skip goes away. Whats up with this?

Posted by Anonymous on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 45 Answers

You may need to look at your exhaust system. If you have a leak, your O2 sensors will send the wrong reading to your engine which will in turn tell your engine to fire differently. Your code will come up reading as a misfired bank. See if you have an exhaust leak first, then see about changing out the O2 sensors behind the leak.

Posted on Jul 04, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2003 Toyota Highlander has the VSC and Trac Off light on


There is a code in your computer system. This code will turn on your engine light. Once the engine light is on the VSC and/or the Traction light turns on automatically. This is your car turning it off. You have to start with reading a code. The code will tell you what area to look into.
If the code starts with PO3-- it is misfiring and usually a coil or plugs etc..., the next two #'s are which cylinder is causing the tripped code. If it starts with PO4-- it is Evaporative codes part of emissions. Google the code you get and it will get you closer to your diagnosis. Hope this helps.

Oct 22, 2017 | Toyota Cars & Trucks

1 Answer

03jeep lbertyrandom missfire cyl 2 4 6check engine light flashing


Check Engine Light/Misfire Due to Intake Valve Locks ...

repairpal.com > Problems > Jeep > Liberty
Jeep Liberty Check Engine Light/Misfire Due to Intake Valve Locks/Valves. ...Misfire cyc 4 and random cyc misfires, changed coil packs and plugs... sounds as if rod ... Light came on again (misfire on cylinder 4) - switched coil from 4 to 2. Light ...

Jeep Liberty Questions - Cylinder Misfire code - CarGurus

www.cargurus.com > Questions > Jeep > Liberty

CarGurusMay 27, 2009 - #4 misfire new plugs and coil pack on #4 light came back on after 300 miles if ... How come it stopped misfiring for 2-3 months, and now is back? ... I have a 2005 Jeep Liberty 6 cylinder, engine light came on scaned the codes ...

Liberty Cylinder Misfire / Computer issue? - JeepForum.com


Nov 28, 2015 | Cars & Trucks

1 Answer

Misfire on cylinder 2


yes,that will work.

May 25, 2013 | Ford Cars & Trucks

1 Answer

Engine light on. went to auto parts store, they diagnosed number 2 or 3 cylinder not firing. prior to this i changed plugs and wires. then i changed the coil. the engine light went off and the gas economy...


Hello mikew564.The first diagnosis was number 2 or 3 cylinder not firing. Once you changed the coil, the check engine light went off. When the light came back on again, did you get it diagnosed again to find out if the problem was the same?... 2 or 3 cylinder not firing????

First of all, there is NO extra wire/ground on the coil/ignition wiring (see images below). The spark plugs and ignition plug wiring can be checked for arcing, corrosion, resistance and can be checked for cracks in the insulators or worn electrodes (and spark gap) by a competent mechanic.
If you are having the same issue (2 - 3 misfire), there are several techniques for eliminating the plug wires or spark plugs. Spray water on the plug wires to see if they are arcing. Swap plugs from cylinders 2 & 3 with cylinders 1 & 4. If you still have a 2-3 misfire, check/inspect/examine the coil connector pins & coil harness to the coil(s) themselves.

ghost45_20.jpg

ghost45_21.jpg

Aug 27, 2011 | 2004 Hyundai Elantra

1 Answer

Lexus 2002 RX300 - What is it when the Trac Off, VSC & Check Engine lights are on and the DTC code says cylynder 1 and 6 misfire


You could have a bad coil pack or a bad fuel injector. swap out the coil packs from the misfiring cylinders and put them in the cylinders that are known to be firing correctly to narrow it down to determine if it is the coil pack first. When is the last time you changed the spark plugs? Pull them out of the misfiring cylinders to check the condition of the plugs.

May 25, 2010 | 2002 Lexus RX 300

1 Answer

2006 dodge caravan, 6 cyl. relaced cole, sparkepugs and wires in oct. 2009. Engine is reading #2 cyl. misfire again. Why


Firts time swap spark plug & ignition coil between two different cylinders and read again if the same #2 cyl. misfires !
If #2 cyl. is OK and another cyl. misfires then spark plug or ignition coil is out of order and must be replaced.
If #2 cyl. misfires again then #2 injector must be checked !
If ignition coils & spark plugs (complete set for 6 cyl.) are replaced then you must check #2 injector !

Mar 15, 2010 | 2006 Dodge Caravan

2 Answers

Check Engine Light is on and the code is P0303


Hello I need a help.
I have 1999 lincoln town car 4.6L V8.They have check engine light on. P 0303 cylinder 3 missfire.
I was changed spark plugs,fuel filter. check compression test 150psi. fuel pressuer 50.
swiching cylinder 1 to 3 fuel injector and coil. but they still have engine code

Feb 27, 2009 | 1999 Lincoln Town Car

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

390 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

77194 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...