Question about 1990 Isuzu Pickup

1 Answer

What all do i need to rebuild my isuzu motor that is a 1.8 liter 4 cylnder

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Isuzu Master
  • 6,826 Answers

Well, you'll need a gasket set, and whatever parts you're going to replace, like bearings for the crankshaft and rings for the pistons, etc.

Also, you might need a timing belt if yours has one.

I once rebuilt a 1979 Honda Accord 1.8L engine this way.

The dealer can help you find the right parts for your engine.

Purchase a book on the subject, as the rebuild process can be complicated.

Also, you need a garage to keep your parts clean and dry as you perform the rebuild process.

Helps to have electricity in the garage for lighting up your work space.

Need a torque wrench to tighten down the head bolts, and socket wrench set for undoing bolts in the first place.

That's basically all I remember from doing the job on the 1979 Honda
Accord in the 80s which probably would apply to your Isuzu motor.

Posted on Jul 04, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

On my 1990 Isuzu 4-wheel drive pickup I got a 2.0 four cylinder motor in it start knocking I got a chance to buy 2.8 liter V6 grover v 6 interchange with the four-cylinder


can be done with a few mods

needs the.engine bay wiring loom of the V6 ... ECU if not diesel
will need the V6 gearbox and transfer case

V6 exhaust and fuel pump

unknown ratios but check if
power train, diffs and drive shafts are the same as th e4

May 29, 2016 | Isuzu Cars & Trucks

1 Answer

Replace isuzu mechanical fuel pump


hire a mechanic to do it for you

Jun 01, 2014 | 1998 Isuzu Hombre

1 Answer

My 2000 isuzu rodeo only drives on winter mode should i rebuild the transmission


Hello Joe.
please say what works and does not.?
and on what road surface you are on, pavement, dirt, ice? what?
and what does winter mode mean. tell actual shift modes.
and what transmission options you have.

no do not rebuild anything, first is diagnosis.
never guess. or go broke fast,
  • 130-hp, 2.2-liter I-4 (regular gas)
  • 205-hp, 3.2-liter V-6 (regular gas)
  • Transmissions:
  • 5-speed manual w/OD
  • 4-speed automatic w/OD
4x2
4x4
limited slip diff option?
Mode select transmission? option 4x4
this is part time 4wd and is not AWD , all wheel drive.
as such it is not for dry (ice-less) pavement and is for offroad.

so what surface are you driving on. 1st.
then in what mode.
are you messing up and using 4x4 on dry pavement
see here for what happens doing it wrong.
http://www.rubicon-trail.com/4WD101/driveline-bind.html

if you wind it up. the gear shift can lock up.
the solution is 2 ways.
drive to dirt shoulder and move slow and shift back to 2WD.
or if can't do that. (no grass , ice, no dirt)
jack up a front tire. and do same.
this unwinds the system.
then shift to 2wd.
some rare cars have partime system with a hidding slip clutch that
prevents wind up. this car dont.
nor does car have an AWD center differential.
good luck.

Mar 27, 2014 | 2000 Isuzu Rodeo

1 Answer

I need Firing sequence for 1991 GMC Sonoma 4.3 liter 6 cylnder


Firing order for a 1991 GMC Sonoma 4.3 liter v-6 is 1-6-5-4-3-2.

zjlimited_721.gif

The number one plug is the first one facing you on the right and the last plug to fire is the first one facing you on the left. The rotor button spins counter clockwise.

Hope this helps (remeber to rate and comment this answer).

Sep 20, 2011 | 1991 GMC Sonoma

3 Answers

What is the firing order for isuzu rodeo 2002 2.2 lits


Please don't forget to rate! This helps us help you!!! Thanks!!


c17hydro_180.gif

2.2L VIN D engine Firing order: 1-3-4-2 Distributorless ignition system

May 12, 2011 | 2002 Isuzu Rodeo

1 Answer

Cylnder 2 missfire need to find out what cylnder is no 2


for 8 cyl:
Firing order: 1-3-7-2-6-5-4-8
Cylinder locations:
Passenger side front to rear: 1-2-3-4 Drivers side front to rear: 5-6-7-8

Sep 08, 2010 | 2004 Ford F150

1 Answer

FIring Order of a 2004 Isuzu Rodeo 3.2L Engine


My apologies for the delay....Due to the bad economy the number of questions posted has skyrocketed 50% in the last 4-months.

For 2WD and 4WD it is the same:
For 3.2L:
Firing Order:
1-2-3-4-5-6
Cylinders:
5-------6
3-------4
1-------2
(front of vehicle)
Coil is on the Spark Plug

Let me know if this helped, or if you have additional information or questions. Feel free to contact me at FixYa.com!

Feb 06, 2010 | 2004 Isuzu Rodeo

2 Answers

I need to know where number one cylnder is on a 88 lamans 4 cylnder motor


i didn't even realize 1988 lemans used a 4 cylinder . but here it is .


d8e1f99.jpg

Jan 17, 2009 | 1988 Pontiac LeMans

1 Answer

TORQUE SETTINGS ISUZU RODEO FOUR CYLINDER


I dont know the specific answer for your question, but I own a 1995 Rodeo and there is an online community you could probably check out that Im sure would have the answer for you.

Check out www.planetisuzoo.com, sign up and post your question there. There are several knowledgeable people there and some good information as well.

Jan 03, 2009 | 2001 Isuzu Rodeo

Not finding what you are looking for?
1990 Isuzu Pickup Logo

102 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14384 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...