Question about 2003 Toyota Highlander

1 Answer

How to replace alternator belt? - 2003 Toyota Highlander

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 14,036 Answers

FIRST TURN OFF RADIO TO KEEP FROM LOCKING IT OUT.REMOVE ALTERNATOR ELECTRICAL CONNECTORS - REMOVE WIRING HARNESS FROM THE CLIP - REMOVE PIVOT BOLT - REMOVE ADJUSTER LOCKBOLT - REMOVE DRIVE BELT - REMOVE ALTERNATOR.THEN PUT EVERY THING BACK VISE VERSA.

Posted on Jul 04, 2010

  • Jonah Oneal Jul 04, 2010

    WELL DONT REMOVE ALTERNATOR IF YOU REPLACING THE DRIVE BELT.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Replacing alternator belt on 2007 1.3 cdti combo is it easy to do


Loosen alternator, push it towards the block until belt is loose. Pull the belt off and replace. Once the new belt is on push the alternator away from the block until belt is tight and tighten bolt/bolts. You might need a bar to keep tension on the alternator while tightening bolt/bolts.

Oct 18, 2016 | Cars & Trucks

1 Answer

How do I adjust the tension on the alternator belt for my 2003 Hyundai Tiburon?


Adjusting alternator belt tension - bolt & pivot bracket design ...

? 13:06
https://www.youtube.com/watch?v=8JN0RtZk_2Y
Nov 26, 2012 - Uploaded by backyardmech
Releasing tension on the alternator belt to remove the alternator- 4 cylinder Honda in this video. ... How to ...

How To Install replace Alternator Belt 1999-06 Hyundai ...

? 4:51
https://www.youtube.com/watch?v=6IWgXTijclo
May 15, 2013 - Uploaded by 1A Auto Parts
How To Install replace Alternator Belt 1999-06 Hyundai Elantra 2.0L .... Adjusting alternator belt tension ...

Dec 21, 2015 | 2003 Hyundai Tiburon

1 Answer

How to replace alternator on 2001 olds aroura


Disconnect battery (always neg pole/post first)
find alternator, loosen belt.
disconnect wiring @ alternator.
take alternator off.
put alternator in place of it
put belt on tighten all screws, belt tension screw first.

Jan 13, 2015 | 2001 Oldsmobile Aurora

1 Answer

How to replace alternator belt for 1991 geo prizm


replace alternator belt.you need to loosen alternator upper and lower belt then push alternator forward to slip off drive belt.if you have the prizim GSI. you need to raise and support the vechicle safely.remove the power steering and air conditioning drive belts.then loosen the lower mounting bolt and nut from the alternator bracket.then remove the alternator drive belt.

Dec 28, 2012 | 1990 Geo Prizm

1 Answer

How do I remove an altinator from a 2004 ford escape.


Hello there,
To replace the alternator in your car:
Open the Escape's hood, and examine the belt-routing diagram on the fan shroud. This will show you the location of the alternator and the serpentine belt tensioner.
Pull the serpentine belt tensioner away from the serpentine belt with the serpentine belt tool far enough to allow you to dislodge the belt from the alternator pulley with your other hand.
Unplug the wiring harness from the back of the alternator by hand. Remove the ground harness from the alternator with the socket set.
Unbolt the alternator from the alternator bracket with your socket set. Lift the old alternator out of the bracket by hand.
Compare the old alternator to the replacement alternator before installing the replacement. Make sure they're both physically identical before continuing. If not, take them both to the parts store to match up a proper replacement.
Set the replacement alternator in the alternator bracket by hand. Bolt it in with the socket set. Plug the wiring harness in by hand and bolt the ground harness to the back of the alternator with the socket set.
Install the serpentine belt on the replacement alternator in reverse of how you removed it from the old alternator.
All the best. Elect_Comp

Sep 13, 2011 | 2004 Ford Escape

2 Answers

85 chevy celebrity. replaced alternator. that one squealed 2. got another. still hear a squeel. does not squeel when belt is off.


ALTERNATOR BELT NEED ADJUSTING AND REPLACING IT GLAZED. WHEN DRIVE BELT GET GLAZED SHINY CAUSE IT TO SLIP AND SQUEAL.REPLACE ALTERNATOR DRIVE BELT. AND ADJUST IT DRIVE BELT TENSION BY TIGHTEN THE UNTIL YOU CAN PRESS DOWN ON THE BELT IN THE LONGEST RUN. YOU NEED TO PRESS DOWN BELT AND GET A 1/4 TO 1/2 INCH DEFLECTION IN BELT.THE BELT CANT BE TOO TIGHT WHERE WHEN YOU PRESS DOWN AT IT WONT GIVE IN NONE TOO TIGHT, WILL CAUSE PREMATURE ALTERNATOR BEARING FAILURE IF DRIVE BELT TOO TIGHT.

Apr 18, 2011 | Chevrolet Celebrity Cars & Trucks

1 Answer

What do i do to get new belt on


FOR THE 3.0L ENGINE IF YOU REPLACE AC BELT LOOSEN TOP IDLER PULLEY CENTER BOLT. IF YOU REPLACING ALTERNATOR AND WATER PUMP BELT LOOSEN ALTERNATOR ADJUSTMENT BOLT AND PIVOT BOLT.IF REPLACING POWER STEERING PUMP BELT LOOSEN POWER STEERING PUMP ADJUSTMENT BOLT AND MOUNTING BOLTS.****** FOR THE 2.4L ENGINE TO REMOVE POWER STEERING BELT LOOSEN TOP IDLER PULLEY.FOR ALTERNATOR AND WATER PUMP BELT LOOSEN ALTERNATOR ADJUSTER BOLT, PIVOT AND MOUNTING BOLTS.FOR AC COMPRESSOR LOOSEN LOWER IDLER PULLEY.

Oct 07, 2010 | 1996 Nissan Pickup

1 Answer

Belt diagram 1997 toyota corolla? alternator belt replacement?


The 97 Corolla has three accessory belts. The alternator belt is the one you see when you look down on the passenger side standing near the front of the engine compartment. If fits over the alternator and the engine pulley. The belt beneath it is the a/c belt (if the car has a/c). It fits over the engine pulley and the a/c compressor. The power steering belt is toward the rear of the engine compartment, on the same side. It fits around the engine pulley and the power steering pump.

Replacing the alternator belt is not too difficult. Standing in front of the car and facing towards the rear, loosen the locking bolt under the right side of the alternator. Then loosen the alternator hinge bolt on top of the alternator. Now you are ready to loosen the alternator belt tensioner adjustment bolt, accessed under the alternator from the front. Turn the tensioner until the old belt is loose enough to remove, then turn it further so that the new belt will go on easily. Replace the belt and re-tension until you have about 1/4 in. to 1/8 in. of play in the belt, tighten the lock bolt and the hinge bolt, and run the engine. If the belt squeals it means you need more tension, but do not overtension. Recheck it after a few days.

Mar 22, 2010 | 1997 Toyota Corolla

1 Answer

How do I replace an alternator on a 2000 VW Passat 1.8T. How hard is it to replace?


it isnt that hard actually

disconect positive battery terminal. and feel the tension on the laternator belt. you will need to bring it back to this tension.

1.) loosen bolts holding alternator in place (LOOK AT THE BELT TO REMEMBER HOW IT GOES, BEST NOT REMOVE THE BELT.)

2.) loosen bolts holding wires to alternator and connect wires to new alternator

3.) Place alternator in engine, replace bolts but dont tighten

4.) put belt in place, it will be slack, use your tire iron or a piece of pipe or wood to pry the alternator back, to bring tension on the belt. You pry the alternator to pull the belt as TIGHT AS POSSIBLE. while holding strain, on it, tighten the bolts.

Feb 27, 2010 | 2000 Volkswagen Passat 4Motion

3 Answers

1994 toyota corolla alternator belt replacement


loosen the bolt that is holding the adjuster of the alternator. loosen the belt by pulling it and the alternator would slide in. remove and replace the belt.

do the reverse on installation.

remember to tighten all bolts of the adjuster and alternator after tightening the belt.

tnx 4 using fixya,

drcool

Sep 13, 2008 | 1994 Toyota Corolla

Not finding what you are looking for?
2003 Toyota Highlander Logo

239 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...