Question about 1993 Chevrolet Camaro

2 Answers

Taking a 93 camaro front clip and installing it on

I'm taking a 93 camaro front clip and installing it on a 51 chevy truck. what kind of problems and modifications should i expect to run into i was told it should basically bolt right up

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

That is not even close to just bolting right up.If you want a camaro clip in your old truck you should use a clip from a 70 to 81 camaro.The subframes come out easy and are a fairly easy weld in as they are close to the same width as your truck frame.If you are not a skilled welder or fabricator you should just rebuild your truck front end,as this is NOT a job for a novice mechanic.A 93 camaro does not have a removable subframe like an older camaro they just have an engine cradle type frame that bolts up into the camaro not a frame that will work in your truck.

Posted on Jul 04, 2010

Ad
  • Level 1:

    An expert who has achieved level 1.

    Welcome Back:

    Visited the website for 2 consecutive days.

  • Contributor
  • 1 Answer

Camaro front clip on an early chevy pickup . This is not a job for a shade tree mech. it requires some talent. & equipment, Use an early year if u go through with this swap. What do you wish to havde when done? if its a lower stance, keep the beam as lowering a Camaro front end requires spindles and springs = $$$$$$ it something to think about.

Posted on May 07, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Will a 98 winstar motor interchangeable to a 93 for explorer


No, that would never work. Nowadays, always use an engine from the same year, or you will run into all kinds of headache with electrical hook-ups and other modifications. Only engine of exact same size and same year-the engine computer is designed for that.
It is possible other years for a 1993 explorer might work, but not any engine manufactured after 1995. That's a whole different project. Any salvager could tell you which years interchange with the '93 model, but it's a small window. And if you change engine size, more modifications than you could imagine.

Jan 29, 2017 | Cars & Trucks

2 Answers

93 chevy camaro security light is on car start somtimes how do i clear this


this problem is cauased by a defective ignition key sensor, u can't replace this witrhout a GM scanner to reprogram the system to the new lock.

Jun 09, 2010 | 1993 Chevrolet Camaro

1 Answer

HOW DO I INSTALL A ONE PIECE FUEL LINE ON A 1966 CHEVY CHEVELLE


Thats a fun one. Had to do it on a 68 camaro. Basically from the middle of the car fish the back end over the axle until you can start the front towards the engines fuel pump. You should have gotten new retaining clips that snap or screw into the frame rails. The brake line is just as much fun.

Feb 01, 2010 | Chevrolet Chevy Cars & Trucks

1 Answer

What is the largest motor that will fit my 93 cutless cierra?


without modifications 3.4 v6 no problem......with modifications 502 BIG BLOCK CHEVY cost $$$$

Oct 12, 2009 | 1993 Oldsmobile Cutlass Ciera

1 Answer

What stock transmission and rear end are on the 95 camaro coupe? Will any year corvette rear end and transmission fit on 95 camaro? Will a 3.8 v6 supercharged motor fit under the hood of 95 camaro?


What you are thinking about doing is all "custom mods"...Nothing is impossible but what you are asking will take a huge pile of money and a lot of expertise. Corvette differentials are completely different and require extensive modifications to install, with very little benefit other than being "different" and a good conversation piece. Likely you would be better served by installing a diff made by Strange Engineering which would be far stronger. In a Camaro, you would also benefit more by using a good 350 engine (performance crate version) with a 700r4 transmission behind it (more reliable and less aggravation) The biggest problem would be getting a wiring harness and ignition system to operate the whole thing, but being a Chevy, there are a great number of suppliers of aftermarket harnesses to work with. That said, it will still take a heap of $ and experience to get it all together!!!
Good luck though!!!

Jun 18, 2009 | 1995 Chevrolet Camaro

1 Answer

Dont know if 4l60-e trany from v-6/4.3 ,4x4 can go in v-8/5.7


this is not in accordance with the certificate of homoglonation,you are not permitted to do this modification without a letter from the manufacturer stating that a certificate exists for this vehicle in this form.If it does then you will need a"projecto" drawn up by technical engineer,then it can only be done by a garage that tax registered.Then and only then can it be presented to the vehicle testing station for a complete yearly inspection.Providing that it passes then the vehicles documents can be changed showing the alteration.Dont want to get stopped by the guardia and the papers not right as that would be a 1500€ fine plus another 400€ and points for driving the vehicle ,with 20% discount if you pay now and an extra 20% if later than 30 days.Dont pay then they take it out of your bank account or charge your credit card,neither of these then they sell your house.VIVA ESPAñA

Feb 19, 2009 | 1994 Chevrolet Camaro

Not finding what you are looking for?
1993 Chevrolet Camaro Logo

270 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...