Question about Cars & Trucks

1 Answer

I am a complete novice when it comes to auto repair. So I went to Napa and got the proper plugs and wires for my 1994 mercury topaz installed them and didnt realize till after the fact that they have to go in a certain size order. Now it wont start. How do I figure out which wire goes where?

Posted by Anonymous on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 95 Answers

You didn't say if it's a four cylinder or six cylinder. Your best bet would be to go to the library and get a book on your car which shows the ignition system wiring diagram and firing order, this should help you. Good luck.

Posted on Jul 04, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a odd grinding Noise only when I'm driving this 2 door 1994 Mercury Topaz Car


check the wheel bearings for failure
check the disc rotors fir failure on the inside from brake pads worn out

Nov 20, 2015 | 1994 Mercury Topaz

1 Answer

Is there "Freeze Plugs" on a 1994 Mercury?


Virtually all engine blocks have freeze plugs. They serve two purposes:
  1. They are designed to burst out of the block in case the engine coolant freezes, preventing a cracked block.
  2. They allow for a more thorough cleaning of the engine block when the block is "tanked" during rebuild/remanufacture.
One thing to consider...what weight of motor oil are you using during the bitter cold months? Heavier weight oils get very thick on the cold mornings. This makes cranking harder and increases engine wear. Check with a local dealer and see if the manufacturer has any suggestions for a thinner oil in the cold months to make starting/running easier.

Dec 31, 2014 | 1994 Mercury Topaz

1 Answer

Remove oil pan 1994 mercury topaz 2.3


Go to an auto parts store and buy the Hanes manualfor Mercury Topaz of the years range you need. It is all in there!

Jan 01, 2013 | 1994 Mercury Topaz

1 Answer

Where is the distrubtor located on a 1994 mecury topaz


Trace all four of your spark plug wires to one location...all four connect to the distributor. Hope this helps.

Dec 19, 2012 | 1993 Mercury Topaz

1 Answer

Looking for the repair manual (printable) for the 92 mercury topaz


you can find the complete auto manual without printing it at auto zone or advance auto for about $20.00 but you can also try clearmechanic.com or webresouceful.com for a downloadable one. thank you for choosing fixya.com

Mar 27, 2011 | Mercury Topaz Cars & Trucks

1 Answer

How do you unhook fuel lines on fuel rell on a 1991 Mercury Topaz?


need special fuel line removal tool set for ford feul line , can buy relatively cheap at a auto parts stor (napa, pep boys, etc)

Sep 09, 2010 | 1991 Mercury Topaz 4 Door

1 Answer

Where is the module DRL topaz 1994


Try this website to download a free manual

Trouble trees are listed for all makes in the manuals for dianogstics



http://ezinearticles.com/?Find-the-Free-Auto-Repair-Manual-You-Need-Online&id=92717

May 01, 2010 | 1994 Mercury Topaz

1 Answer

Reverse lights dont work in 94 topaz. I replaced bulbs and fuse is good.


look at the top of your transmission near the shift cables and there should be a large bolt-looking fitting with two wires coming out of it and a plug on the end. Disconnect this plug, then place a wire across the iside terminals of the plug coming from the body, not the trans. Check the lights then and if the are on, you have a bad reverse light switch. Hope this helps :)

Jun 10, 2009 | 1994 Mercury Topaz

1 Answer

The transmission slips in my 94 topaz


the bands need adjustment and probabley a filter .not ajob you can do at home.but any auto trans mission place wii do it in a short time

Mar 17, 2009 | 1994 Mercury Topaz

1 Answer

Headlights went out.


its the dimmer. it happens a lot with this model.

Mar 10, 2009 | 1994 Mercury Topaz

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...