Question about 1991 Nissan Pickup

1 Answer

Hello, we have a 1991 King Cab Nissan pickup truck. We replaced the power steering pump and the idle pulley. However, the steering remains very stiff. Do you have any suggestions?

Posted by on

  • Ian Summerfield
    Ian Summerfield Jul 03, 2010

    check drive belt for slipping.check fluid level,jack vehicle up and turn steering back and forth,is it tight?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 541 Answers

Steering box, steering rack and pinion set

Posted on Jul 04, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i tighten power steering belt on a 1991 Nissan sentra


This is just a general answer. There are 2 ways to tighten a power steering belt, 1, by adjusting the power steering pump OR 2 by adjusting a tensioner pulley.
Inspect the belt system and see which one your vehicle uses. If the pump is adjustable, it will be mounted on one end by either a sliding bolt on a curved bracket like the alternator, or by an adjusting bolt.
If your car has an adjusting pulley, check the routing of the belt. It will normally run from the front engine pulley over the adjusting pulley then over the power steering pump pulley. The adjusting (tensioner) pulley will have to be loosened, then either pulled to the tightening position by hand and retightened, or else there will be an adjusting bolt and nut which must be turned to tighten the belt before retightening the pulley.
Sorry, I don't know your car that well so my answer is just generic.
Good luck

Apr 14, 2014 | 1991 Nissan Sentra 2 Door

1 Answer

What do i do to get new belt on


FOR THE 3.0L ENGINE IF YOU REPLACE AC BELT LOOSEN TOP IDLER PULLEY CENTER BOLT. IF YOU REPLACING ALTERNATOR AND WATER PUMP BELT LOOSEN ALTERNATOR ADJUSTMENT BOLT AND PIVOT BOLT.IF REPLACING POWER STEERING PUMP BELT LOOSEN POWER STEERING PUMP ADJUSTMENT BOLT AND MOUNTING BOLTS.****** FOR THE 2.4L ENGINE TO REMOVE POWER STEERING BELT LOOSEN TOP IDLER PULLEY.FOR ALTERNATOR AND WATER PUMP BELT LOOSEN ALTERNATOR ADJUSTER BOLT, PIVOT AND MOUNTING BOLTS.FOR AC COMPRESSOR LOOSEN LOWER IDLER PULLEY.

Oct 07, 2010 | 1996 Nissan Pickup

1 Answer

Where is the location to the (power steering part that you put the fluid in) in a 1984 nissan king cab pickup


Should be located right on the steering pump itself which is operated by the belt....Hope this helps.

Sep 03, 2010 | 1984 Nissan Pickup

1 Answer

How to change the power steering belt


There should be two bolts that you loosen/ not take off,,,,then under the pump should be a threaded rod for the actual movement!

Oct 15, 2009 | 1997 Nissan King Cab

1 Answer

I have a 1983 nissan 720 pickup and it has and outside mounted fuel pump. the power wire fell off of it now it doesnt work and i cant find anywhere on the pump where to put the power wire back on.. i need...


If the wire broke off close to where it enters the fuel pump body you wont be able to reattach the wire without disassembling the pump body to resolder the broken wire leads inside. I would recommend finding a new universal style replacement pump at a discount auto parts store as I did on an 84 king cab. You may have to mount a bracket and re plumb some new fuel line also.

Aug 13, 2009 | 1983 Nissan Pickup

1 Answer

1991 Nissan pickup


Some Asian cars and trucks hve the pump sitting low on the engine and might be hard to see. The resovoir tank should be visible on the engine or fender and the fluid is caried to the pump via rubber hoses.

Feb 11, 2009 | 1991 Nissan Pickup

Not finding what you are looking for?
1991 Nissan Pickup Logo

203 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...