Question about 2005 Mercury Montego

2 Answers

How do i recharge my ac for 2005 mercury montego. not sure where port is?

Posted by on

  • dwindoloski0 Jul 03, 2010

    good comment. waiting for a followup response

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

Ok everyone lets see, first things first, in the picture below is your a/c liquid hose. you should recognize the 1. marked fitting as the "Oh looky it\'s right there right? This is easy." valve that is not the right one, it looks like it should be, but it\'s just a little too big.. boooo!, that is the HIGH pressure fitting. Now this picture is sideways so pretty much follow the metal line down and look toward the firewall and you should see another black cap like the one on number 1. Hello low pressure charge port see #2 it\'s connected to the bigger metal line. I bought the short canfor $10 less.. and already punctured the can. So there you go, good luck, don\'t kill yourself, and if you do I\'m not responsible. Not even karmically.how do i recharge my ac for 2005 mercury montego. - c20b39c8-3ef1-465c-99f5-db729cfb6f4e.jpg

Posted on Jun 07, 2014

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,272 Answers

The low pressure port is located to the right and just below the power steering reservoir. To charge the AC you can try this procedure or else get it charged by the local car ac charging shop. 1) To begin, you'll need to adjust the ambient temperature arrow on the gauge to the approximate temperature of the air outside. 2)Twist the gauge clockwise to prevent the loss of refrigerant already in the system. 3) Turn on the vehicle with the A/C on high. 4) Attach the hose to the low-pressure line spout. In most cases, the hose will not fit on the high-pressure spout. Attaching the hose to the high-pressure line could result in disaster. 5) Once attached, read the gauge. If the indicator is in the green area, your system needs little, if any, refrigerant. As a general rule, if it's green then it's fine. Don't mess with a good thing. If it is below the green area, detach the hose and then twist the gauge counterclockwise until the puncture underneath is above the threads. 6) Screw on the can of refrigerant, then attach the hose back to the low-pressure line. 7) Twist the gauge all the way down to puncture the can, then all the way up to allow the R-134 access to the system. You should see the indicator rise. If it rises to the green area after the can is empty, you're job is done. -------- Also if you require repair service manual for your car.You can get it from the link below.Click on the link

  • Montego-Service-Repair-Manual-Factory-/370402077806">http://cgi.ebay.com/ebaymotors/2005-05-Mercury-Montego-Service-Repair-Manual-Factory-/370402077806 ------- Always keep repair service manual of your car handy for any kind of troubleshooting in your car.It helps a lot. Thanks. Keep updated for any more query. You can rate this solution and show your appreciation.

    Posted on Jul 03, 2010

    • dwindoloski0 Jul 03, 2010

      the only connector i found is to the left as you look at the front of the card and has some round part just above it that it is connected with. Am I in the right spot.?

    • raj somaiya
      raj somaiya Jul 03, 2010

      It should be connected with the ac pump.internally.
      Is it connected then yes you are on the right spot.
      Thanks for the query.



    ×

    1 Suggested Answer

    6ya6ya
    • 2 Answers

    SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

    Hi,
    a 6ya expert can help you resolve that issue over the phone in a minute or two.
    best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
    the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
    click here to download the app (for users in the US for now) and get all the help you need.
    goodluck!

    Posted on Jan 02, 2017

    Add Your Answer

    Uploading: 0%

    my-video-file.mp4

    Complete. Click "Add" to insert your video. Add

    ×

    Loading...
    Loading...

    Related Questions:

    1 Answer

    Need entry code for used 2005 mercury montego dealer went out of business


    contact the manufacturer( ford) , engineer department and as them for the code
    you will need vin number , year , rego number engine make etc

    Jul 28, 2016 | 2005 Mercury Montego

    1 Answer

    AC diagnosis help 2005 mercury Montego


    You should check for a clogged orifice tube. It'll be located right before the evaporator inside the refrigerant line. Also, your desiccant in the receiver/dryer is probably saturated but since you are opening the system anyway, you should probably replace it anyway.

    Mar 19, 2017 | 2007 Mercury Montego AWD Sedan

    1 Answer

    Replace fuel filter on 2005 montego


    You may need a certain tool for ford fuel lines to get the clips to come off. This job should only take about 10 min. locate the fuel filter,usually an in line. clip off either end to stop the flow of gas. quickly change one end at a time. replace with new clips.

    Oct 14, 2012 | 2005 Mercury Montego

    1 Answer

    Where do you check how do you check the trans axle fluid on a 2005 mercury montego. where is the stick???


    they don't have a dipstick anymore, transaxle is considered a sealed unit , wonder who thought that up??

    Aug 25, 2010 | 2005 Mercury Montego

    1 Answer

    Ac does not cool at slow speeds or at idle


    check that the fans are running on slow speed all the time the AC is turned on ,if not this is your problem

    Jun 15, 2010 | 2005 Mercury Montego

    1 Answer

    How do you remove the brake light switch at the brake pedal on a 2005 Mercury Montego


    What does any of this oil change **** have to do with a brake light switch? Come on admin, remove this ****

    Aug 17, 2009 | 2005 Mercury Montego

    Not finding what you are looking for?
    2005 Mercury Montego Logo

    Related Topics:

    3,518 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Mercury Experts

    yadayada
    yadayada

    Level 3 Expert

    75822 Answers

    fordexpert

    Level 3 Expert

    5501 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22156 Answers

    Are you a Mercury Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...