Question about 2003 Chevrolet Equinox
My driver side window will not operate nor will the locking mechanism...what should i do
Check the wire harness between door and vehicle, good chance there is a few broken wires there. If that isnt the case check the fuses. If they are good take it to the dealer to see if it is the computers cause the problem
Posted on Jul 03, 2010
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
May 29, 2014 | Mitsubishi Galant Cars & Trucks
May 04, 2014 | 2000 Chevrolet Blazer
Sep 09, 2017 | Cars & Trucks
Mar 12, 2012 | 2006 Chrysler Sebring
It sounds like it could be the plastic connecting bit that links the lock tumbler lever to the rod that operates the door lock mechanism, has broken or become disconnected. To check, you will need to remove the trim on the inside of the door, after removing any screws and the inside door lever and window winder.
Once you have the inside trim off and the plastic sheet, you will see an access hole for the door mechanism and the lock tumbler. It should be attached to the actuating rod by the aforementioned plastic bit. If plastic bit appears OK try re-attaching it or replacing it if broken. If the lever part of the lock tumbler which attaches to the rod is broken the lock will need replacing.
Jan 10, 2011 | 1999 Porsche Boxster
Jan 10, 2011 | Scion TC Cars & Trucks
Jan 25, 2010 | 2000 Ford Focus
Dec 14, 2008 | 2001 Subaru Forester
187 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: