Question about 1991 Buick Park Avenue

Open Question

On a 91 Buick Park Ave, what order do you bleed the brakes?

Posted by on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 8 Answers

SOURCE: 91 buick park ave.

Well, that can be a ton of things. Usually it means: A. its not getting enough air, or any air. B. Its not getting enough gas. It could be a problem with the Mass flow Sensor- which can be cleaned or replaced-, or maybe a bad fuel pump or bad fuel lines or something. Either way the problem sounds like it just can't run because it can't get enough gas.

Posted on Aug 16, 2008

MrRobertLee
  • 16 Answers

SOURCE: where is the theft deterrent

http://www.alldatadiy.com

Posted on Aug 19, 2008

  • 1 Answer

SOURCE: 91 Buick Park Ave won't start

i just came across this problem myself the other day. i have a 91 buick park avenue that sometimes won't start. i checked several things out like cable connections and coil pack etc. etc. come to find out it was the wiring that came off the coil pack and connects to the crank sensor. the wiring that ran over top of the water pump had finally heated up so bad the coating on the wires had melted and when the engine got hot enough the wires would come in contact and send false signals to the computer not letting it start. after the car cools down and the wires contract it would start. so check the wires from the coil pack to the crank sensor to make sure the wires are not melted together.

Posted on Jan 16, 2010

kenny_econom
  • 55 Answers

SOURCE: Bench bleed master cylinder 91 Buick Park Ave

refill before it sucks air

Posted on Dec 05, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

91 park ave abs light goes off and on


There's a problem with your anti lock brake system.

Aug 27, 2014 | 1991 Buick Park Avenue

1 Answer

How do i tighten the parking brake on an 91 buick park ave ultra?


check to make sure the rear brake shoes are adjusted before adjusting park brake cable. pull the brake drum off and inspect brake shoes before adjusting

Sep 14, 2012 | 1991 Buick Park Avenue

1 Answer

I need a motor for a 91 park ave


Can be order at Autozone.com or your local Autozone store. Usually cost somewhere around $500.00 to $760.00. Depending on which model of Park Avenue you have, it could be more or less.

Also for a cheaper route, try craigslist.org, or your local wreaking yard. I've seen a many 91 Park Avenues sold for parts or repair. If you hold out you can get one with a great motor, that probably has a problem like a bad transmission for cheap. I've even saw a 2003 Park Avenue ultra sold for $500.00 because the transmission was bad. So hold out and a get a really good deal on a good motor. And as always be sure to do your bargin shopping at the wrecking yards.

Good Luck

May 20, 2010 | 1991 Buick Park Avenue

1 Answer

My abs light comes on after driving for a few minutes and stays on. After that if I pump the brakes it sometimes slips and stalls and studders (like it would if I were to suddenly hit the brakes hard)....


that could be right, it could also be the sensor. something like your brakes i would listen to the dealer and have replaced. however, i know that on bmw's they have a tendancy to come on for what seems to be no reason and they havent figured it out yet. play it safe, have it replaced at the dealer.

Mar 11, 2010 | 1991 Buick Park Avenue

1 Answer

2004 buick park ave. rt front brake drags, gets hot! caliper replaced, twice! brake hoses replaced, new master cylinder cap and gasket, bled all fluid from system, and replaced with new. seems to drag on...


THE ANTILOCK BRAKE SYSTEM COULD BE THE CULPRIT HERE. YOU WILL NEED TO TAKE IT TO YOUR LOCAL REPAIR SHOP OR DEALER AND HAVE THEM DO A PRESSURE BLEED ON THE BRAKE SYSTEM. THEY SHOULD ALSO PERFORM AN ABS SYSTEM BLEED WHICH IS DONE WITH THE SCAN TOOL. THIS SHOULD TAKE CARE OF THIS PROBLEM. HOPE THIS HELPS!!

Sep 09, 2009 | Buick Park Avenue Cars & Trucks

1 Answer

95 Buick Park Ave. Paking Brake!!!


The switch for that light is on the e-brake assy. If you look above the pedal there will be a one wire switch on the mechanism.

Feb 17, 2009 | 1995 Buick Park Avenue

1 Answer

91 buick park ave.


Well, that can be a ton of things. Usually it means: A. its not getting enough air, or any air. B. Its not getting enough gas. It could be a problem with the Mass flow Sensor- which can be cleaned or replaced-, or maybe a bad fuel pump or bad fuel lines or something. Either way the problem sounds like it just can't run because it can't get enough gas.

Aug 16, 2008 | Buick Park Avenue Cars & Trucks

Not finding what you are looking for?
1991 Buick Park Avenue Logo

Related Topics:

121 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...