Question about 1997 Geo Metro

1 Answer

How do i chage the fuel injector for a geo metro 1997 LSI?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Geo Master
  • 6,826 Answers

REMOVAL & INSTALLATION Fig. 1: Removing injectors from fuel rail how do i chage the fuel injector for a geo metro - 84245032.gif
Fig. 2: Make sure injectors rotate freely in cylinder head 84245033.gif

  1. Relieve fuel system pressure and disconnect the negative battery cable.
  2. Remove intake air hose between throttle body and intercooler.
  3. Remove accelerator cable.
  4. Unclamp PCV and fuel return hoses from deliver pipe.
  5. Unclamp injector wiring harness.
  6. Disconnect injector coupler.
  7. Remove cold start injector pipe from delivery pipe.
  8. Remove vacuum hose from pressure regulator.
  9. Remove fuel feed hose from delivery pipe.
  10. Remove pressure regulator from delivery pipe.
  11. Remove delivery pipe with injectors.
  12. Remove injectors from delivery pipe. To install:
  13. Replace injector O-rings and lubricate with fuel. NOTE: Make sure injectors rotate smoothly. If not, probable cause is incorrect installation of O-ring.
  14. Check if insulator is scored or damaged. If it is, replace with new one.
  15. Connect delivery pipe with injectors.
  16. Install pressure regulator to delivery pipe using a new O-ring.
  17. Install fuel feed hose to delivery pipe.
  18. Install vacuum and fuel return hoses to pressure regulator and clamp securely.
  19. Install cold start injector pipe to delivery pipe using new gaskets.
  20. Install injector coupler. Clamp injector wiring harness.
  21. Install PCV hose to cylinder head.
  22. Install throttle position sensor coupler.
  23. Install accelerator cable and adjust free-play.
  24. Install intake air hose to throttle body and intercooler.
  25. Connect the negative battery cable.
  26. Start engine and check for leaks.
prev.how do i chage the fuel injector for a geo metro - next.gifss= next.gif

Posted on Jul 03, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the fuel pump and fuel filter located on a 95 geo metro lsi


Lay down along side the car by the drivers door. Look under the car and there is the fuel filter. It's strange by that's where it's located. Is your car a 1.3 L 4 cyl ? I know those engines like that back of my hand if you need further help.

Dec 13, 2014 | 1995 Geo Metro

1 Answer

97 geo has spark, fuel to tbi no fuel from injector, injector has power


old post.
metro , what engine, size?
answser
fuses check all fuse with a meter. !!! first. not last like 10,000 answers here.
the inectors go hot key on, if not the fuse is blown
the CEL dash lamp in the cluster must glow key on or the ECU is dead. (fuse)

Feb 13, 2014 | 1997 Geo Metro

1 Answer

97 geo has spark, fuel to tbi no fuel from injector


double posted, back up one.
older post but not that , old.

Feb 13, 2014 | 1997 Geo Metro

1 Answer

Need firing order diagram for 1997 Geo Metro Lsi 1.3 liter 4 cilinder


1997 Geo Metro 1.3 liter L4 VIN "9"

831ccd3.gif


Hope helps. (remember rated and comment this).

Sep 07, 2010 | 1997 Geo Metro

1 Answer

Headlights keep flickering


Check the wiring to the headlight. Maybe where the headlight wires meet the headlight are loose. Sounds like a wiring issue.

Jun 18, 2010 | 1997 Geo Metro

1 Answer

Do the valves need to be adjusted on a 92 geo metro lsi


No. Geo Metros use hydraulic lifters which can not be adjusted. If you Metro is making excessive valve noise, the lifters are probably worn out or the oil level is low.   

Feb 27, 2010 | 1992 Geo Metro

2 Answers

My 1997 geo metro sqeals when started


this could be the serpentine belt at the front of the engine it could be warn and needs replacing, but this could also be the signe of a warn bearing ie idler bearing, waterpump bearing, alternator bearing, power stearing pump bearing, best to get it checked, as a belt is only a few bucks, where as the others could be allot more, should i say will be...hope this helps

Feb 12, 2010 | 1997 Geo Metro

1 Answer

1997 Geo Metro


probably a radiator problem go see a mecano

Jul 19, 2008 | 1997 Geo Metro

Not finding what you are looking for?
1997 Geo Metro Logo

618 people viewed this question

Ask a Question

Usually answered in minutes!

Top Geo Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Geo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...