Question about 1998 Mercury Mystique

Open Question

How do i replace the starter on my 1998 mercury mystique?

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 94 Answers

SOURCE: How do I remove and replace front wheel bearing on

you need to take the tie rod off , the lower ball joint off , take the strut bolt out and remove the nut and washer off the cv axel then pull the whole hub Assembly off then the new bearing need to be pressed in , then reinstall everything not as hard as it sounds

Posted on Mar 09, 2009

  • 1 Answer

SOURCE: mercury mystique starter location

its a 6 I beleive its a 2.5

Posted on Mar 24, 2009

ZJLimited
  • 17970 Answers

SOURCE: What is the procedure for removal of the radiator

Ford Contour/Mystique/Cougar 1995-1999 Repair Guide

Radiator -REMOVAL & INSTALLATION
(see Figures 1 through 7)

7249321.jpg
Fig. 1: Remove the upper radiator hose from the radiator


d2d2436.jpg
Fig. 2: Use a back-up wrench to remove the transaxle cooler line connections-automatic transaxle only


3213ac8.jpg
Fig. 3: the lower transaxle cooler line connection


ec9272d.jpg
Fig. 4: Remove the passenger side radiator mount and ...


956cd3d.jpg
Fig. 5: ... and the driver's side radiator mount


f06fec0.jpg
Fig. 6: The condenser can be support using mechanic's wire as shown here, or another suitable device


242d821.jpg
Fig. 7: Carefully lower the radiator out the bottom of the vehicle

  1. Disconnect the negative battery cable.
  2. Drain and recycle the engine coolant.
  3. Remove the upper radiator hose from the radiator.
  4. On 2.5L equipped vehicles, remove the radiator overflow hose from the radiator.
  5. On vehicles equipped with an automatic transaxle only, remove the transmission cooler line from the cooler inlet fitting and plug the line and the fitting.
  6. Remove the engine fan.
  7. Raise and support the vehicle.
  8. Remove the lower radiator hose from the radiator.
  9. On vehicles equipped with an automatic transaxle only, remove the transmission cooler line from the cooler outlet fitting and plug the line and the fitting.
Remove the cooler lines while holding the radiator connector with a back-up wrench.
  1. Support the radiator, and A/C condenser with a jackstand or other suitable device.
  2. Remove the lower radiator supports from the front of the subframe.
  3. Remove the two retaining bolts for the A/C condenser from the brackets at the bottom of the radiator.
  4. Position the jackstand aside and remove the radiator out the bottom of the vehicle.
To install:
  1. Carefully raise the radiator into place and support the radiator with a jackstand or other suitable device. Install the two retaining bolts for the A/C condenser into the brackets at the bottom of the radiator.
  2. Install the lower radiator supports and tighten the bolts to 71-97 inch lbs. (8-11 Nm).
  3. Remove the jackstand and install the transmission cooler outlet line (if equipped) and the lower radiator hose to the radiator.
  4. Lower the vehicle.
  5. Install and tighten the fan shroud nuts.
  6. Install the transmission cooler inlet line (if equipped) and the upper radiator hose to the radiator.
  7. On 2.5L equipped vehicles, install the radiator overflow hose from the radiator.
  8. Connect the negative battery cable.
  9. Fill the cooling system with the proper 50 / 50 mixture and start the vehicle.
  10. Bleed the cooling system and check for leaks.

Hope helps with this (remember rated this help) Good luck.

Posted on Jan 20, 2010

  • 2 Answers

SOURCE: i need a fuse box diagram for a 1998 mercury

I need a fuse panel diagram for a 98 mercury sable and i dnt have a manual for the car

Posted on Mar 29, 2010

  • 1 Answer

SOURCE: 1995 mercury mystique starter replacement process?

At first, it looks like an impossible task, however if you start by removing the positive battery cable, then unplug mass air flow sensor, carefully remove air filter box and its components from the throttle body. from there you should be able to see the starter better and have more room to work and get it out. You can take the battery right out if you want a little more working space for your elbows. take the wires off the solenoid, sometimes the old studs of solenoid will break due to corrosion. remove the two 13mm bolts that hold the startersome models have one at the bottom also that you will need to access from the bottom side.

Posted on Nov 06, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1998 mercury mystique LS, V6 alternator problem


It is possible the replacement alternator is defective.

Jan 13, 2014 | 1998 Mercury Mystique

1 Answer

How do I replace starter in 2000 mercury mystique V6 2.5?


http://www.ehow.com/how_8217220_install-2000-ford-contour-v6.html
couldn't find your exact model, but this is the procedure for that motor.

Feb 27, 2013 | 1998 Mercury Mystique

1 Answer

1998 MERCURY MYSTIQUE MANUAL TRANSMISSION WILL NOT GO INTO TO ANY GEAR?


That happened once in a Datsun pick up I had. A friend took the boot off of the gearshift and found something had come loose and pushed it back into place.

Dec 04, 2012 | 1998 Mercury Mystique

2 Answers

Location oa a speed sensor to a 1998 mercury mystique


The speed sensor for the transaxle should be mounted on the side with a wiring harness attached.

Aug 07, 2012 | 1998 Mercury Mystique

1 Answer

How do I replace the starter


disconect the battery cable and than there are 2 bolts and remove cable to starter from the battery

Jun 30, 2012 | 1998 Mercury Mystique

1 Answer

How do you remove a starter on a 1998 mercury mystique 2.0 litre


Please first see my tip at http://www.fixya.com/cars/r5973094-starter_replace, then see specific instructions below for your Mercury. Let me know if you have questions.
Your starter is in the back of the engine.
from autozone.com
  1. Disconnect the negative battery cable.
  2. Remove air intake resonators. [loosen clamp and remove bolts, lift out resonator]
  3. Remove starter motor upper mounting bolts.
  4. Raise and support the vehicle.
  5. Remove the nuts on the starter terminals and remove the cables from the terminals.
  6. Remove the two starter lower retaining bolts and remove the starter.

e18db91.gif
resonator


eaf7550.gif
upper starter bolts



77b70cc.gif

Sep 26, 2010 | 1998 Mercury Mystique

1 Answer

Battery is drained by an internal short even with the key turned off on a 98 Mercury Mystique. No fuses are blown. With the battery fully charged it takes about 30 hours to drain the battery. Can a small...


Yes, it is very possible that a small internal short in the starter or alternator can cause this. Sometimes the starter wires can lightly touch and cause it to lose a charge. There are a number of things that can short and cause a battery to die over an extended period time. You should probably consult a specialist because it can be difficult to track down.

Jul 10, 2010 | 1998 Mercury Mystique

1 Answer

Transmission filter change on 1998 Mercury Mystique


it cant be changed unless the transmission is pulled and then taken in half.ver difficult process.

Feb 25, 2009 | 1998 Mercury Mystique

1 Answer

I have a 98 mercury mystique v6, When I try to start,


just a stab in the dark here. maybe starter drive bad, or starter sellinoid, or the worst case teeth gone on one section of flywheel. i would say its either starter drive or starter sellinoid. either case starter has to be removed. hope this helps. OLD SCHOOL.

Jan 10, 2009 | 1998 Mercury Mystique

Not finding what you are looking for?
1998 Mercury Mystique Logo

Related Topics:

159 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

fordexpert

Level 3 Expert

5495 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...