Question about 1983 Mercury Grand Marquis
Posted by Anonymous on
Your 1st Soution to Reach in Between the Rea Axel, You Can Try that.
But i Personally Recommend you Take Loose the Straps so you can Make Sure you have a Good Veiw of the Fuel Pump Retaining Ring.And Make sure you Get it Replaced Right and Have a Good Seal on That Rubbed Gasket And can Tighten the Ring Good.Not Counting the Wiring that Goes to the Pump.
Hope this will help you. Please let me know by Voting for The Quality of my Solution.
Thanks For Using FIXYA From : d_hubbs
Posted on Jul 18, 2010
No you should be able to reach in between the rear axel and undo the lines take the ring and pull the pump out
Posted on Jul 03, 2010
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Raise car under frame then put jack under axle before removing the shock.
Can use locking pliers to hold the shaft from turning (may have to cut away dust boots). Top nuts are accessed and can be seen from the wheel wells or from the gap between the trunk and mount frame (can't see nut from this angle). Take care with fuel lines near the driver side nut.
Preventing shafts from turning on new shocks will be tough. Make sure you have a proper tool to fit top of shaft with enough room between top of shaft and trunk (gap decreases as the nut is tightened) so the tool can be removed.
Posted on Mar 30, 2009
Tips for a great answer:
Oct 10, 2017 | 1996 Mercury Grand Marquis
May 10, 2014 | 2002 Mercury Grand Marquis
Jan 11, 2013 | 2000 Mercury Grand Marquis
Jun 16, 2011 | 1996 Mercury Grand Marquis
Mar 19, 2011 | 1996 Mercury Grand Marquis
Feb 10, 2011 | 1988 Mercury Grand Marquis
Aug 02, 2010 | 1996 Mercury Grand Marquis
Jan 09, 2009 | 1983 Mercury Grand Marquis
Jun 28, 2008 | 1995 Mercury Grand Marquis
76 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: