Question about 2003 Volvo XC90

Open Question

Instrument panel & electrical problems with an XC90 D5 from 2003. I have serious problems with the board computer & Instrument panel due to which false erriors are shown in the message display which also eventually crashes. Did this happen to anyone before ? What is there to do ? Please advise

Posted by on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

griff842000
  • 9 Answers

SOURCE: 6720, A011, 112B, 4490, 5F11,1144 - Volvo XC90 -

here is the fault read out page for most volvos http://volvospeed.com/vs_forum/index.ph ... =66705&hl=
hope this works for you if not send email to me griff842000@yahoo.com

Posted on Oct 21, 2009

duane_wong
  • 6826 Answers

SOURCE: xc90 displaying the message 'transmission service

Check the fluid level first.

Posted on Aug 01, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the obd1 fuse located on a 95 bmw 318i


The fuse box with spare fuses, fuse removal tool and relays are located on the left wheel arch inside the engine compartment.

23 - 5 Amp Unloader Relay (K9), Rear Defogger Relay, Combination Switch, Climate Control System, Clock, Instrument Cluster, On-Board Computer

31 - 5 Amp Climate Control System, On-Board Computer, Instrument Cluster, Clock, Chime Module, On-Board Display

45 - 7.5 Amp Wiper Relay, Wiper Motor Relay, Clock, On-Board Computer, On-Board Display Check Control Module

iIn the glove box

on-board computer 23 45 (10-93 to 09-95)

on-board computer 23 45 (10-95 to 09-96)

on-board computer module, center console


Sep 09, 2014 | Cars & Trucks

3 Answers

Instrument Panel won't light


http://www.parts.com/volvo/1994-volvo-940-instrument-panel-parts.cfm

you an visit this link for instrument panels and save money.

Jun 23, 2008 | 1994 Volvo 940

1 Answer

INSTRUMENT PANEL NOTHING WORKS WHAT NEEDS TO BE DONE


most likely a bad circuit board in the DIM. would need new DIM and software to be done by Volvo dealer. approximate cost $1300.00

Sep 23, 2013 | 2004 Volvo XC90

1 Answer

I have a 1988 gmc k2500 with 5.7 tbi. The gauges fuse blows randomly.when this fuse blows the gauges go out and the alternator quits charging and truck will die due to electric cooling fans. Alternator...


Some thing in the instrument panel has shorted out or the wire from the fuse to the panel., pulling to many amps. If you could do without the panel for two days you would find out if it's the panel or the wires before. Electrical problems are no fun. I'm into a Ford that I just got running (second day) And there are still problems. (stupid computers). For the wires a good place to start is behind the fuse panel

Jul 05, 2011 | 1988 GMC K2500

1 Answer

2002 Ford Taurus - instrument panel light My instrument panel lights, that eliminate the speedometer tachometer fuel and temp gauges has gone out. The high beam cruise and turn signal lights are all that...


Hi I'm Rick! I'm afraid you have a cluster problem, the cluster houses the gauge package you see in front of you.. all your gauges operate from the printed circuit board to which they are attached and a portion of that board has failed.. The fix is to replace the cluster.

Jun 07, 2010 | 2002 Ford Taurus

1 Answer

My 2000 Toyota Echo's 94,000 mile instrument panel...


Actually it is not serious at all. You just need to adjust the dim level on the instrument panel lights. You should have a knob for that. Isn't it the one on the left side of the steering wheel.

May 21, 2010 | 2000 Toyota ECHO

1 Answer

Headlight swicht broke


Removal & Installation
  1. Disconnect the negative battery cable from the battery.
  2. Remove the lower steering column cover-to-instrument panel screws and the cover.
  3. Remove the instrument cluster trim plate-to-instrument cluster screws and the panel, then allow the panel to hang to the left side by the wiring.
  4. Disconnect the electrical connector from the rear of the headlight switch.
  5. Disengage and remove the headlight switch from the instrument cluster trim plate.
To install:
  1. Connect the electrical connector to the rear of the headlight switch.
  2. Engage and install the headlight switch in the instrument cluster trim plate.
  3. Install the instrument cluster trim plate-to-instrument cluster screws and the panel.
  4. Install the lower steering column cover-to-instrument panel screws and the cover.
  5. Connect the negative battery cable to the battery and check operation.

Apr 27, 2010 | 1995 Chevrolet Astro

2 Answers

My 96 blazer keeps blowing gauge fuse which is a 10 amp but it has also blown 30 amp fuses,please help


unplug the instrument cluster. If it now does not blow, replace the instrument cluster. If it stll blows then you need to trace the wire in the loom looking for where it touches metal or have several wires melted together.

Mar 19, 2010 | 1996 Chevrolet Blazer

Not finding what you are looking for?
2003 Volvo XC90 Logo

Related Topics:

133 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volvo Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7689 Answers

Are you a Volvo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...