Question about 1996 Lexus ES 300

1 Answer

My stereo doesn't work anymore. The volume is very low, can barely hear it... I tried an aftermarket too, but still nothing... anyone??? plsss. email me at badelitab@yahoo.com thanks much

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Mentor:

    An expert who has written 3 tips or uploaded 2 video tips.

  • Expert
  • 117 Answers

Sounds like you might have blown a speaker. These days they are often 3 in one assemblies and you're probablyjust hearing the tweeter while the bass and midrange are gone.

The sure way is too use am ohmmeter and look for between 2 and 8 ohms.

This is why it pays to buy good warranted speakers for 5 years like some companies offer. You pay more up front but in the long run its usually worth it. It's also why most speakers are only 30 to 90 day warranties -- They're one of the most blown up things in the consumer industry.

I went to college for electronics, BTW.

Posted on Jul 03, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2008 Chevy Trailblazer. Problem started with the air conditioner blowing hot air and when it does this, I noticed the temperature gauge doesn't register anything.


Hi Christy.
It sounds like your BCM, (Body Control Module) is failing, or your Connector/Connectors to your BCM could be at fault. They could be corroded, Damaged, burned, loose, and/or could possibly have bad wires on or going to the connectors. I would take it to a mechanic that you trust and have them check it for you. Do you have a check engine light on? Hope this helps.

Nov 04, 2016 | 2008 Chevrolet Trailblazer

1 Answer

Volume goes up and down randomly


check to see that the fader swich is not on

Apr 07, 2014 | 2009 Chevrolet Aveo

1 Answer

What is wrong with my radio??? AM works but FM doesn't.?


I'm very sorry to say this but, The internal FM modulator has blown & the only way of getting FM back is by replacing the head unit.

Sep 21, 2012 | Cars & Trucks

1 Answer

Iam try to wire a aftermarket stereo on a 1987 gmc jimmy using stock plug ins but every time i put on brakes stereo goes off Ive checked all wires to make sure none are bare also made sure nothing...


Could be a ground problem. You take the ground out of the harness and run it to the body or run a ground from the radio back to the body or both.

Sep 11, 2011 | 1987 GMC Jimmy

1 Answer

My radio in my 2006 f 150 super crew truck stoped working will not read any disc at all..it worked fine than quit. it is a single disc cd player...any solutions


if it isnt reading discs usually it is a problem with the laser. you can buy cleaning discs at electronics stores. if cleaning doesn't work then you must replace it. unless you notice that it lacks power or has a dimmed display. it actually is possible to repair a stereo but hardly anyone will do so because it is not cost effective. and if you replace it, aftermarket is the way to go. stock stereos just are not built to last.

Apr 29, 2011 | Ford F-150 Cars & Trucks

1 Answer

I have a 98 Buick Century with the factory cassette/radio. I want to use the tape adapter to play my IPOD through the stereo. It will work for a few seconds or sometimes a few minutes but then spit the...


Those adapters are barely functional at best. You will never get good sound, even if it was working perfectly. I tried one but then bought an aftermarket stereo.

Aug 03, 2017 | 1998 Buick Century

1 Answer

AC display won't dim after stereo installation


If you disconnect the stereo, does the temp. display go back to working properly? Did you connect the stereo Illumination wire correctly? Are all the other stereo wires connected correctly? Double check what the wires in the aftermarket harness are supposed to be and don't just go by color.

Jun 17, 2009 | 1996 Oldsmobile Cutlass Supreme Coupe

1 Answer

BMW M3 E46 Stereo whine


What you are hearing is ground loop interference. If you have an aftermarket headunit/amplifier this is a common occurrence. A ground loop isolator in line with the low level amplifier inputs should solve the problem. Otherwise, it may be a malfunction of the stock cd unit or amplifier. BMW used a balanced input on some of the stock amplifiers, which would make ground loop interference all but impossible.

Apr 18, 2009 | 2002 BMW M3

Not finding what you are looking for?
1996 Lexus ES 300 Logo

Related Topics:

104 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexus Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

905 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Are you a Lexus Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...