Question about 2002 Daewoo Lanos

1 Answer

Spark plug order installed new plugs and leads but lost the order

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Daewoo Master
  • 1,757 Answers

For the 2002 Daewoo Lanos:
Includes ALL Models:
S and SX Sedan
S and SE Hatchback

All have the 1.6L DOHC In-Line 4-Cylinder:
Firing Order:
1 - 3 - 4 - 2

Cylinders:
..........(back)..........
|...1....2....3....4...|
.........(front)

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

Posted on Jul 04, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What order do the spark plugs go in?


there is no set order in replacing spark plugs
however if you are asking the firing order for the plugs leads to fit to the spark plugs, simply remove one lead at a time , one plug at a time and replace that lead then move onto the next plug

Mar 19, 2017 | Cars & Trucks

1 Answer

How change spark plugs


Have a look on the following link for the socket/wrench/tool you will need:
spark plug socket Google Search


To avoid getting the ignitions leads replaced in the wrong order:
Remove ONE lead from ONE plug at a time.
Use the tool/socket to remove that plug by turning anti-clockwise.

Put the new socket in hand tight - this is to avoid cross-threading the spark plug and damaging its threads/threads in cylinder head.

When the spark plug is hand-tight/finger tight, tighten it with the socket /tool. Just 'gently tighten it up' - do not overtighten.

Replace the ignition lead and then move onto the next plug.


removing spark plug Google Search

Feb 10, 2016 | 2005 Ford F-150

1 Answer

I'll start from the beginning... 91 cbr250rr sat for over 6months then wouldn't start. Didn't have a choke so decided to put in new one while doing that decided to replace spark plugs and new leads, (had...


Is your choke working OK?..is there a spark at plugs take a lead of and put a good plug in the cap hold the plug against metal block to see if a spark is present use gloves or a pair of pliers to hold plug or u will get a big shock,this will olso check ur leads check each one in turn ,the firing order chud be in hand book

Oct 29, 2013 | Cars & Trucks

3 Answers

I just changed the spark plugs and now im getting back firing and i cant go over 50 mph


Go back and pull each spark plug wire and put it right back on. There is probably a loose one. This is assuming that you didn't pull all the wires off at once when changing the plugs. If you did, the you put the wires back on in the wrong order. Then, you'll need to find a manual online for the correct wiring order for the plug wires.

If they are on in the right order, you need new plug wires. They don't last forever!

Mar 21, 2011 | 1994 Buick Century

1 Answer

How do I replace Spark plug wires in order on a 1988 Oldsmobile Cutlas Ciera


hi, if you take No. 1 spark plug lead OUT from the engine side and follow this to the distibutor ONLY TAKE ONE OUT AT A TIME. if you mark the new leads with insulation tape you will not get confused and then the next plug lead and so on. gerry

Sep 09, 2010 | 1988 Oldsmobile Cutlass Ciera

1 Answer

Ithink my spark plug wires are in the wrong order, how do Ifind t


On any four cylinder engine the firing order is always 1-3-4-2. Cylinder 1 is at the front of the engine, the same end as the timing chain and the opposite end to the gearbox.

Remove the spark plugs and manually turn over the engine until the timing marks line up (down by the crankshaft pulley). You can use a socket on the crankshaft nut to turn the engine bit by bit, the purpose of removing the spark plugs is to prevent cylinder compression making it easier.

Once the timing mark has lined up, remove the distributor cap and observe the position of the rotor arm and briefly pop the distributor cap back on: the lead exiting the cap above the rotor arm should go to cylinder #1. The next quadrant that the rotor arm advances as you turn the engine over to will be the position that the lead for cylinder #3 attaches. By the same process you can then identify where the leads to cylinders #4 and #2 go.

When finished, ensure that the distributor cap is securely fastened and refit the spark plugs: if they're taper seat spark plugs (no washers) then when they just get tight then tighten no more than a further 1/6th of a turn. If they have washers then it's an extra 1/2 to 3/4 of a turn and a bit more if they're brand new plugs where the washers have never been compressed. Refit the leads in the correct order which you've just established and make sure that they're secure and you should be good to go unless there's another problem.

May 26, 2010 | 1983 Volvo DL

1 Answer

How do i change the spark plugs on a 2003 kia rio


INSPECTION

1. Disconnect high-tension code from spark plug.
2. Remove the spark plug.
3. Connect the spark plug to a high tension code.
4. Hold the spark plug with insulated pliers 5~10mm from a ground.
5. Crank the engine and verify that there is a strong blue spark.
If there is no spark, inspect the following points.

Step Inspection Action

1 Check for good connection of ignition coil Yes Go to next stop.
No Repair or replace
2 Check if resistance of high-tension leads are OK Yes Go to next step.
No Replace
3 Check if the ignition coil is electrically charged
1) Ignition switch "ON"
2) Check if the engine coil (+) is electrically charged
Yes Go to next step
No Check the wire harness between ignition switch ignition coil and ECM
4 Check if resistance of ignition coil is OK
Resistance
Primary : 0.36~0.44Ω (at 68°F (20°C))
Secondary : 10.9~13.3kΩ (at 68°F (20°C)) Yes Go to next step
No Replace
5 Check if ECM is OK Yes
No Replace

REMOVAL

Do not attempt any maintenance on spark plug if engine is hot.
1. Disconnect negative battery terminal.
2. Carefully remove high-tension leads.
3. Use compressed air to blow any dirt or debris from around spark plug hole.
4. Check that spark plug fits squarely in spark plug socket and remove spark plug.

Raise a vehicle and install SST(OK552 131 001) in order to replace cylinder 2, 4, 6 spark plug.

INSTALLATION

1. Install spark plug into cylinder head.

Tightening torque : 18~22lb-ft (25~30N·m, 2.5~3.0kg-m)

2. Reconnect high-tension leads.
3. Reconnect negative battery cable.

Jul 17, 2009 | 2002 Kia Rio

1 Answer

Need firing order diagram.. wont start


remove the dizzy cap, crank motor over to find out the rotation of the rotor. Remove the no.1 spark plug and bring no.1 piston up to top dead centre on compression stroke, mark side of dizzy body where the end of the rotor points to, replace dizzy cap and see which lead it lines up with.
that will be your no.1 lead, find the firing order and put the leads back on the dizzy cap in the direction of the rotors rotation, run those leads to the corresponding plugs and it should start.

May 19, 2009 | 1979 Lincoln Mark V

1 Answer

Change spark plug wires on 04 kia sedona


REMOVAL OF THE PLUGS:

Do not attempt any maintenance on spark plug if engine is hot. 
1. Disconnect negative battery terminal. 
2. Carefully remove high-tension leads. 
3. Use compressed air to blow any dirt or debris from around spark plug hole. 
4. Check that spark plug fits squarely in spark plug socket and remove spark plug.

Raise a vehicle and install SST(OK552 131 001) in order to replace cylinder 2, 4, 6 spark plug. 

INSTALLATION:

1. Install spark plug into cylinder head.

Tightening torque : 18~22lb-ft (25~30N·m, 2.5~3.0kg-m)

2. Reconnect high-tension leads. 
3. Reconnect negative battery cable. 

Hope this helps and simple to understand. Good luck

Apr 20, 2009 | 2004 Kia Sedona

Not finding what you are looking for?

Open Questions:

See all 2002 Daewoo Lanos Questions

2002 Daewoo Lanos Logo

Related Topics:

412 people viewed this question

Ask a Question

Usually answered in minutes!

Top Daewoo Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

yadayada
yadayada

Level 3 Expert

76630 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8516 Answers

Are you a Daewoo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...