Question about 2005 Mazda 6

Open Question

My check engine, tcs and antiskid light came on after disconnecting the positive side of my battery. how do I reset these lights and make them go away?

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 1779 Answers

SOURCE: CHECK ENGINE LIGHT COME ON

The light is coming back on because the cars computer is detecting that there is still a problem after it's reset. You need to have the engine codes scanned to determine what the problem is and correct it so the light can be reset. Check your local auto parts store, most do free scans of engine codes and will give you the meaning of the codes and what to do to fix the problem. If you need further help, post the codes here and any other info regarding the problem. Good luck

Posted on Apr 09, 2009

Ad
  • 6982 Answers

SOURCE: battery disconnected turned on "check engine" light

Light should go out by itself once the system runs through a few cycles.

Posted on Feb 04, 2010

  • 10 Answers

SOURCE: Battery & TCS Lights on 2004 Mazda6 won't go away

the codes have to be cleared on the cars computer to remove the lights. you may have to take the car to a dealer to clear the codes

Posted on Feb 19, 2010

  • 507 Answers

SOURCE: disconnected positive battery terminal to

First off, there is a tool to clear check engine lights. It's called an OBD2. It's a scan tool. The cheapest ones out there are around $100. The more expensive ones that most people use, around $3500. The reason they use these, is so they don't create more problems trying to "clear" engine codes. As for keyless entry, insert your key to unlock the car, then start your car with your key. On most vechiles if you start your vechile with your key, your alarm will shut down and be ready for when someone messes with your car again. Give a try and if not, I'll actually look up how to reset the alarm. It is a factory alarm right?

Posted on Aug 28, 2010

SOURCE: I have a check engine

Have it properly diagnosed by a repair shop,
and resolved

Posted on Feb 11, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

How to reset check engine light 2005 dodge ram 3;7 litre


Check and make sure All fluids are Full, oil, brake, trans, etc... they all have low sensors tied to check engine indicator, then disconnect the Pos+ from the battery for one minute, then reconnect,
the engine light should then reset...

Mar 18, 2015 | 2005 Dodge Ram 1500

1 Answer

My tcs light on,high rpm , wont shift in overdrive/ is it a sensor in tranny


I also have a 1999 El Dorado, with 188,000 miles. First my TCS light came on once because I was really racing the car. The car's system went into "reset mode" turning off all of the car's computer controlled functions, Starting with TCS, A/C, ABS etc. This was due to the battery or alternator failing to supply enough electrical current under extreme demands for power and performance. I ultimately had to replace my alternator $450.00. Second, I had a "Check Engine" light on because my transmission was not shifting at the proper times. The computer had to be reprogrammed then the shift pattern was fine.

You should check to see if you car's alternator is working properly by starting the car then disconnection the battery cables while it is still running. If your car still runs, then your alt is okay.
I would also have the transmission's program codes checked and reset if necessary to shift at the right time. When they hook one of those Caddy scopes to your car's main computer, it spits out a series of codes. I do not know how to read the codes, I just know that they can be changed to make the car's performance better. I hope this was helpful.

-derrick iarussi

Jun 06, 2014 | 1999 Cadillac Eldorado

1 Answer

CHECK ENGINE LIGHT, TCS OFF LIGHT AND THE TRACTION LIGHT are on...


Code 340 is for a problem with the cam position sensor. That would affect the tach and cause the check engine light to be on.
And most all the time the check engine light is on the other warning lights will be also. The Traction control system uses the engine and the ABS system to function. So if there is a problem with the engine, the TCS will be disabled.
The cam sensor and circuits would need to be tested. It could be a wiring problem.

Apr 24, 2013 | 2006 Mazda 6 s

1 Answer

How to fix VTEC System Malfunction code P1259


It is the wire close to the VTEC valve solenoid plug be cut off. Sounds wired, but it happened to my 2001 accord EX V6 sedan. After I solder it back, the TCS light turned off. But I had to disconnect the battery for 5 minutes and put it back to reset the Check Engine light.

May 21, 2012 | 1998 Honda Accord

1 Answer

Engine light is on tcs light keeps blinking and there is a gap in the trothle when u press the gas


the tcs can mean 2 things, 1 is the temperature colant switch, which is mostly located on top of the intake manifold, and sometimes close to the thermostat housing, this is based upon what type of vehicle it is, and the engine size. also unless your computer might be saying throttle control sensor, or switch. this switch should be located close to the throttle body area, after replacing or checking out the part, you can remove the light , either with a ob 2 scan tool, or disconnect the positive battery cable for about 1 minute, then reconnect it back up, light should now be out.

Apr 05, 2011 | Lexus IS 250 Cars & Trucks

1 Answer

2003 mazda mpv. I REPLACED THE UPPER PVC HOSE.


Tcs is not related to the engine. Please get a scan and post the trouble codes here.

Jul 19, 2017 | 2003 Mazda MPV

1 Answer

I replaced the transmission in my 1998 oldsmobile intrigue and now the service engine soon, abs ans tcs lights won't turn off. I have had diagnostics run on it and no codes are found on the computer. I...


THE SERVICE SOON LIGHT IS DIFFERENT FROM THE SERVICE ENGINE SOON LIGHT. MINES ARE ALSO ON AS WE SPEAK . I THINK I NEED TO SERVICE MY ABS BRAKES. WHEN YOU PUT YOUR CAR ON THE SCAN IT SCAN ENGINE CODES

Feb 13, 2010 | 1998 Oldsmobile Intrigue

1 Answer

I have a 1999 honda odyssey.


Take it to Autozone and get them to read the code. If it is a minor problem (i.e., needs new gas cap) fix it and I would disconnect the battery for about 10 minutes and reset the check engine light. It should go off. If it is a serious problem it will come back on. If not it will stay off.

Before you do this get the radio code as disconnecting the battery will disable your radio and you will have to enter a code. It should have come with the car, If not call the dealer and he should be able to give it to you.

Good luck.

Jun 30, 2009 | 1999 Honda Odyssey

3 Answers

Misfire in Cylinder 1,2,3,5,6 of my 2000 Acura Tl


you may have a faulty crankshaft position sensor this is what controls the firing of the plugs. you may also have corrosion on the plug for the coil pack causing multiple misfires

May 17, 2009 | 2000 Acura TL

2 Answers

How to reset engine light on gme envoy


Disconnect both the positive and negative terminals from your battery and let sit for about 5 minutes and reconnect. This will reset your system and check engine light will go off...

Sep 25, 2008 | 2005 GMC Envoy Xl

Not finding what you are looking for?
2005 Mazda 6 Logo

Related Topics:

202 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8270 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...