Question about 2002 Toyota Sequoia

2 Answers

How do you replace the middle brake light on a 2003 Toyota 4 Runner. It is located on the lift gate and is a solid panel on the inside behind the assembly.

Posted by on

  • rickpetty Jul 03, 2010

    I am specifically referring to the center brake light located on the lift gate, not the side brake lights.

×

Ad

2 Answers

Take a flat headed screwdriver and gently pop the lens off from the bottom. There are four to five grey plastic tabs on the inside of the lens housing that help the red lens just snap back and hold in place. Be sure to wrap the screwdriver with a thin towel so you don't scratch your paint when popping off the lens. The replacement bulb number is: 921

Posted on Jul 03, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 3,917 Answers

Hi

Please check the link bellow….

http://www.95zuk.com/tail_lights/pages/image/imagepage1.html

Let us know if you have something more to know else accept the suggestion.
Thank You for contacting Fixya.com

Posted on Jul 03, 2010

  • rickpetty Jul 03, 2010

    I am referring to the brake light located on top of the lift gate in the middle of the vehicle.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The handle broke off on my 2003 jeep grand cherokee laredo liftgate. how can i open it now? i can't find anything on the inside in the back and my tail light is out.


You will need to remove the interior panle from the loft gate to axess the latch
there is 4 screws along the bottom of the panle to remove then carfuly pull the panle away from the lift gate there is plastic clips that hold the panle to the gate these may need to be replaced when re installing the panle they can be purchased at the jeep dealer.
now look into the lift gate and you will see where the handle rod conects to the latch lift on this rod and the gate will open
to replace the handle remove the 2 10 mm bolts and disconect the rod from the latch install the new handle and rod to the latch install the 2 10 mm bolts. install the panle and 4 screws
this should cover it

Jul 13, 2010 | 2003 Jeep Grand Cherokee

1 Answer

Starter removal on a 1990 toyota 4 runner. Where


it is not fun w/o lift look behind passenger wheel you will need to raise front end remove wheel ,remove skid pan,and of course battery ends if 4wd I highly reccomend a lift good luck and please rate this

May 05, 2010 | 1990 Toyota 4Runner

2 Answers

2003 Toyota Camry - Both Brake lights not working


Lok in the trunk on the left side, behind the carpet for a small plastic box with a bunch of wires going to it. Look to see if there is brake light powe coming in with the pedal depressed. If so, and no power is coming out, you need to order and replace the "taillamp failure sensor".

Jul 16, 2009 | 2003 Toyota Camry

1 Answer

Remove a driver side door panel on a 2000 Toyota Limited 4 Runner


remove the screws that hold the inside door handle and clips behind the door panel

Jun 14, 2009 | 2000 Toyota Corolla

2 Answers

How do I replace the Rear Brake light bulb of 2001 Toyota Sienna?


I have a 2001 Sienna and have had to replace most of my tail light bulbs.

The bulbs that are mounted in the fender (wrap arounds) have acess panels in the van's interior that easily pop out and expose the back of the light assembly.

However, the bulbs that are found in the lift gate are a different matter. You have to remove the whole interior panel to the lift gate to expose the light assemblies. Go to your auto parts store and get a tool to help pop out the plastic retainers from the lift gates metal frame. Don't force the retainers out. Go slowly and gently so that you don't damage the interior panel. If you are really gentle you might even get to reuse the retainers.

Good luck!

Jun 08, 2009 | 2001 Toyota Sienna

1 Answer

'96 Toyota 4-Runner makes a loud squealing noise and brake light


Sounds like one of the auxillary belts slipping it may just need tightening up. I think the 4-Runner has two belts one large and one for the steering pump

May 13, 2009 | 1996 Toyota 4Runner

1 Answer

Replaced rear brakes, Alarms still active


i have a 2003 toyota 4-runner my brake and abs vsc are on and it has a beeping loud noise.....what do u think is the problem?

Aug 21, 2008 | 2003 Toyota 4Runner

1 Answer

No brake lights. Brake light above lift gate works but no brake lights. 2003 Chevy Venture


I own a 2003 venture,all the back lights stopped working except the one above lift gate.I changed circuit boards and everthing worked fine this was in feb.Now six months later(august)I had to order another board this one shorted out and melted the part that plugs into the board(does anyone know what the name of that part is?)

Jul 25, 2008 | 2003 Chevrolet Venture Passanger

Not finding what you are looking for?
2002 Toyota Sequoia Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8269 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...