Question about 2003 Ford Expedition

1 Answer

I have a 2003 Ford Expedition EB, when I brake the steering wheel vibrates and the truck pulls to the right.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 6,826 Answers

Have the calipers,and the caliper brake hoses checked,the right one especially.and have the brake rotors turned.

Posted on Jul 03, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Wnen ever i apply brakes at a stop sign it vibrate ot when i turn left it vibrates


If it tries pull the steering wheel back and forth, it is brake rotors. If it just vibrates threw the body and steering, it is the right side wheel bearing.

May 14, 2016 | 2003 Ford F-350 Super Duty

1 Answer

How replaced brake ligth switch on ford expedition 2003


make sure check brake light fuse first if brake light fuse okay.you replace brake light switch by removing trim panel below steering column.look under brake pedal area unplug electrical connector .remove the cotter pin and pull switch and power brake booster pushrod off the pin.then slide switch off power brake booster pushrod dont lose small nylon washer when installing new brake light switch.

Nov 13, 2011 | 2003 Ford Expedition

1 Answer

When brakes applied the steering wheel shakes.


Your disc brake rotors are warped. Solution? Remove the disc brake rotors and have them turned on a brake lathe. Warpage comes from a hot disc brake rotor going through a puddle of water which causes the warpage. If you have a Parking Brake, get in a safe area and when stopping, ONLY apply the parking brake. If the steering wheel stops shaking...there's your problem...warped disc brake rotors.

Sep 11, 2010 | 2003 Ford Expedition

2 Answers

I replaced rotors and brakes still vibrates


when does it vibrate, my gosh. vibration when at 65-75mph is balancing, vibration in steering wheel is front brakes. pulsation in brakes is rear. vibration all the time on or off brakes, bad tire............need more info.

Mar 07, 2010 | 2003 Ford F250 Super Duty Crew Cab

1 Answer

My 2003 expedition EB vibrates when applying brakes


the front rotors are warped ahd either need to be turned or replaced. use quality parts and motorcraft pads. if you use cheap rotors, they stand the chance of either being warped upon install or warping soon after.

Nov 08, 2009 | 2003 Ford Expedition

1 Answer

2003 Toyota Corolla Wheel Alignment


The specs are what the manufacturer recommends for the vehicle when it leaves the factory. However that means with the original tires and condition. The caster is not adjustable on a Corolla, so if the vehicle pulls even with the tires switched, there is a possibility there is damage to the strut or steering parts. However, before changing anything, check all tire pressures and make sure the brakes are in good condition. A brake that is not releasing properly will cause a pull to that side. Individual toe is rather meaningless - the total toe is what is measured. You have no king pins on a Toyota so you will not have KPI.

Oct 31, 2009 | 2003 Toyota Corolla

1 Answer

Vibration in the wheels when turning left or right


Check to see if the steering sector is about to fall off,and the power steering pump.If all that is secure,check the mounts on the trans,and the transfer case.If the mounts are broken,or weak,this would allow the vibration,when turning.Let me know if I can help any more.roniecon@gmail.com

Sep 09, 2009 | 1998 Ford Expedition

Not finding what you are looking for?
2003 Ford Expedition Logo

Related Topics:

119 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...