Question about 2000 Mercury Grand Marquis

1 Answer

Change a thermostat 2000 marquis - 2000 Mercury Grand Marquis

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 37 Answers

  1. Drain the coolant below the water thermostat.
  2. Remove the engine appearance cover.
  3. change a thermostat 2000 marquis - 84796017
  4. Remove the bolts, the water outlet adapter and hose and position out of the way.
  5. 84796018
    1. Remove the water thermostat and the O-ring seal from the intake manifold.
      • Inspect the O-ring seal, install a new seal if necessary.
    1. To install, reverse the removal procedure.

Posted on Jul 03, 2010

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 4340 Answers

SOURCE: how do I change the thermostat 2000 grand marquis

It needs to sit in a recess in the housing, typically if you are asking the question that you are asking, the thermostat housing may be bent or cracked. If it is nto installed correctly, it kills the housing...Must be perfectly true, and sqaure....

I am not sure about the gasket, if it came with, use it, some designs use o ring to seat the thermostat, others use o ring as seal...

i normally seal it anyways...

Posted on Sep 27, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I clear the codes after changing fuel filter on 2000 mercury grand marquis


The easiest way is with an OBDII Scan tool, however disconnecting the battery for about 15 minutes will usually do the trick too.

Mar 06, 2015 | 2000 Mercury Grand Marquis

1 Answer

How does thermostate set in housing


the thermostat always sits with the pellet in the engine (the pellet is the center of the thermostat that is wrapped in the spring)

Dec 08, 2012 | 2000 Mercury Grand Marquis

1 Answer

Cannot change temperature on heat & air


Temp is controlled by an electric motor(or could be vacuum hose) on the blender door of heater housing. If you find this is operating correctly, then the problem is a plugged heater core.Backflush it by removing both heater hoses and flushing from water pump side toward thermostat side.don-ohio

Oct 23, 2011 | 2000 Mercury Grand Marquis

1 Answer

I have what appears to be a broken 9L3Z8592B (thermostat housing) from a 2000 Grand Marquis. How big a deal is that to replace? The part's cheap enough...


its not hard to replace and while your there change the thermostat and gasket(seal) and the anti-freeze if it hasn`t been changed.make sure all the air is out of the system after refilling.

Apr 24, 2011 | 2000 Mercury Grand Marquis

1 Answer

Change thermostat 1998 grand marquis


Locate the water hose at the top of the radiator and follow it to the top of the engine block. There you will find the thermostat housing. Remove the two bolts and remove the housing. Pay attention as to how the thermostat is sitting in the housing. Lift it out and put in the new thermostat the same way. Make sure you replace the thermostat housing gasket. Reassemble the housing and add anti-freeze until full.

Apr 11, 2010 | 1988 Mercury Grand Marquis

1 Answer

How do I change the thermostat 2000 grand marquis


It needs to sit in a recess in the housing, typically if you are asking the question that you are asking, the thermostat housing may be bent or cracked. If it is nto installed correctly, it kills the housing...Must be perfectly true, and sqaure....

I am not sure about the gasket, if it came with, use it, some designs use o ring to seat the thermostat, others use o ring as seal...

i normally seal it anyways...

Sep 27, 2009 | 2000 Mercury Grand Marquis

1 Answer

Temperature sensor 2000 Mecury Grand Marquis


Make sure that is the sensor. That should be your oil pressure sensor. Follow the top radiator hose to the thermostat look closest to that for the wire going to the sensor. This should be the temp sensor. Good luck

Mar 20, 2009 | 2000 Mercury Grand Marquis

Not finding what you are looking for?
2000 Mercury Grand Marquis Logo

Related Topics:

227 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

fordexpert

Level 3 Expert

5537 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...