351 windsor engine diagram (showing all external components)
(1991 Full Size Bronco)
SOURCE: firing order for 1989 full size ford bronco 302
13726548 #1 cyl is front pass side and count to back 1234 are on pass side.5678 are on driver side.# 5 being front
SOURCE: engine wiring Diagram for a 351 cleveland
have you gotten an answer for the wiring on your 82 ford bronco w a 351C? i have the same problem putting a 351C into my 81 ford bronco
SOURCE: i have a 1988 ford bronco full size xlt it is ideling low when u
if its throttle body, give it a good cleaning with carb cleaner while its running and hold open the throttle so it wont die. also I would check out the TPS (throttle position sensor) pretty cheap fix.
SOURCE: vacuum hose routing
stores as you call them have minimal description and ford house parts professionals quote "dont have enough time for these older models" so not solved
SOURCE: Should I rebuild my Ford Bronco 351 Windsor Holly
In all my experience, if you know how to correctly tune a edelbrock then go with that, but, holley has outstanding carbs that can muster up to an output of 1,200hp. it would be much cheaper to et a rebuild kit from say, o'reillys, 20-45 dollars depending on which one you have.
I have a 1985 Bronco 351w 4x4, i just rebuilt my holley and she runs smooth
9,270 views
Usually answered in minutes!
no gotem
×