So how can i get a code to unlock my car radio its a passat we replaced the battery and i need a safe code?? what ca i do??

IMPORTANT NOTE:
You must have the security anti-theft code for your VW radio from the car manufacturer, or from a VW dealer!

You can find the radio code at: http://www.radio-code.co.uk/

The sequence of programming for a 1999 VW Passat radio is:
1. Simultaneously push "SCAN" and "RDS" keys until on the screen will appear "1000" displayed.
2. Release keys. No more push on "SCAN" and "RDS" keys because otherwise number "1000" will be considered as first safe code attempt.
For example: we have the security code "5079". Then:
3. By the no.# 1 key you will set up the first safe code digit. Push 5 times on the no.# 1 button. The "5" number will be setted.
4. By the no.# 2 key you will set up the second safe code digit. Push 10 times on the no.# 2 button. The "0" number will be setted.
5. By the no.# 3 key you will set up the third safe code digit. Push 7 times on the no.# 3 button. The "7" number will be setted.
6. By the no.# 4 key you will set up the four-th safe code digit. Push 9 times on the no.# 4 button. The "9" number will be setted.
7. Then simultaneously push again "SCAN" and "RDS" keys to confirm this safe code. On the screen will be displayed "SAFE" notice. Release keys! For few seconds a radio frequence will be displayed.
The radio is now ready to use!

there is only some steps you have to do before you change the battery So as to avoid losing any codes (radio and anther some features for automatic doors lock when 20k/m speed,,,,) keep radio off ,all doors unlock ignition key outside your car.then replace battery .

You can find the radio code at: http://www.radio-code.co.uk/

The sequence of programming for 2004 Volkswagen Passat radio is:
1. Push simultaneous "SCAN" and "RDS" keys until on the screen will appear "1000" displayed.
2. Release keys. No more push on "SCAN" and "RDS" keys because otherwise number "1000" will be considered as first safe code attempt.
For example: we have the security code "5079". Then:
3. By the no.# 1 key you will set up the first safe code digit. Push 5 times on the no.# 1 button. The "5" number will be setted.
4. By the no.# 2 key you will set up the second safe code digit. Push 10 times on the no.# 2 button. The "0" number will be setted.
5. By the no.# 3 key you will set up the third safe code digit. Push 7 times on the no.# 3 button. The "7" number will be setted.
6. By the no.# 4 key you will set up the four-th safe code digit. Push 9 times on the no.# 4 button. The "9" number will be setted.
7. Then push again simultaneous "SCAN" and "RDS" keys for confirm this safe code. On the screen will be displayed "SAFE" notice. Release keys! For few seconds a radio frequence will be displayed. The radio is now ready for use!

Please do rate my response. Thanks!

Replace

If you don't have MODE and SCAN buttons ( I didn't ) you can try as above but with TP and TA - they worked for me.

Hi
Wiih most radio units....If you have the proper code and have NOT tried more than 15 times to enter an incorrect code....you should be ok.
Turn OFF ignition switch and remove the key. Switch OFF interior lights. Switch ON Radio unit and SAFE will appear.
Leave everything alone for a period of ONE HOUR. During this time NO power (no matter how small) should be drawn from the battery. This is why the interior lights MUST NOT come ON when the door is opened. Trunk should also remain closed. In the event of any power been drawn from the battery in this time...You must start all over again.
Radio should after this time return to standard mode...Usually 4 flashing bars. Then enter your code. Dont forget to lock in the code and all should be fine
All the best with it
John

there is another fuse at the back of the radio. if that fuse is ok check if there is power comeing to the radio if there is u will need a new radio

No the vin number has nothing to do with the radio code the dealer has a automated phone number they call and tells them how to retrieve a code and the manufature gets the unlock code from this,try to google radio unlock procedure for the vw passat.

Passat 97 need to re-enter code ( 4 ) digit, however it shows the number 2 on the on screen when the radio is turned on.
Help. I need to know the steps to reset. thanks

try disconnecting the battery cable or radio power input for a half hour or more make sure you have the key ready when you reconnect the battery cable as the factory alarm will sound.