How do i reset the maint. req. light on a 06 toy tundra?

The '91 & newer models turned the maint, req. light on by a timer in the ECU & the ECU turns it on around 120k miles based on a timer and requires a dealer or shop visit to be reset.But it isnt going to hurt anything by being on.

check oil level first on level ground ??? maybe vacum pipe leak?? had this fault last week guy was qouted 300 samolies to fix i did the job for free ,split pipe at autobox ..........

When a Honda Maint Req light blinks, but then stops, it is telling you to change your oil. If you don't change it, eventually, the maint req light will stay on. Here is how you reset the maint req light: 1) Turn they key to the II position
2) Turn the key to the off position, and push and hold in the odometer reset button
3) Turn they key back to the II position, while still holding the odometer button.
4) After about 10-15 seconds, the light should go off.
If that doesn't work, try it this way: p.p1 {margin: 0.0px 0.0px 0.0px 0.0px; font: 12.0px Verdana}

With the igniition off, press and hold the odometer button, turn the key to the "on" position, but do not start the car. Keep the odometer button down until the oil light begins and ends flashing. Turn the key off, and then start car to see if it worked or not.

try this with key off push and hold the trip re-set now turn key to on position. I have a toyota and this works for it. This may or may not work for honda

That warning light usually only service (oil change) reminder.

Reset the "MAINT REQD" Light on Toyota Sienna:

1. With the car started (ignition on), set the LCD odometer readout to total mileage (not trip A or B).
2. Turn the car off (ignition key to the OFF position).
3. Push in AND HOLD the button/knob that switches the odometer
4. Turn key to ON position without starting the car. You will notice the maintenance light blink and go out.
5. Release the odometer button/knob.
6. Turn key to OFF position.
7. That's it! The "MAINT REQD" light has been reset to warn you to change your oil in another 5,000 or 7,500 miles or so.

Hope helped with this (remember rated this help) Good luck.

That is for oil changes. It come on when the oil change is due.
When you have your oil change done, the lube tech should reset the this light every time.
If you need help resetting the light, let me know.

read your owners manuel

Here is the proceedure:

Turn the key to ON

Observe the odometer, ensure that it says "ODO", and your total mileage travelled, not "trip A" or "trip B"

Turn the key off.

Press & hold the black tripmeter reset button, hold it until advised to release

Thurn the key to the ON position (do NOT start the car)

Observe the odometer.

You should see 5 dashes, then 4 dashes, then 3 dashes, then 2 dashes, then 1 dash, and then 5 zeros; and then whatever mileage you started with will be redisplayed.

Release the trip meter reset button

Your reset proceedure is complete.

Reset - step 1 turn the key to the 'on' position. using the trip meter button, toggle the lcd until 'ODO' is displayed. step 2 turn the key off. now, push and hold the trip meter button. while holding the trip meter button, turn the key to 'on'. step 3 while you continue to hold the trip meter button, you will see on the lcd disply five (5) small dashes and they will begin to 'count down' rather quickly. step 4 continue holding the trip meter button and once all the dashes have been cleared, your lcd will display six zeros (000000) - release the trip meter button now - and then the lcd will display 'ODO' and your current mileage. at this time, your 'maintenance required'/oil change light has been reset.