1996 Mercury Grand Marquis Logo

Related Topics:

Posted on Jun 07, 2010
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Driver elec. window auto feature not shutting off when window reaches full down postion? please help

1 Answer

gerry bissi

Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

  • Mercury Master 4,390 Answers
  • Posted on Jun 07, 2010
gerry bissi
Mercury Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Joined: Jan 07, 2009
Answers
4390
Questions
1
Helped
3060491
Points
11499

Don't press switch to second detent then. Just press it enough to click one detent. Replace switch. Salvage ayrd - cheap. car-part.com
page iwth asterisk is lowest price for part. good luck.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

I have 2004 bmw e46 316i engine code p1062 full stroke position not reached what does this mean and how to fix error

pic04-1mwvccaogkh1fgyrwvgb5502-4-2.jpg this is the throttle sensor the air intake feed come into this, its different on some models, part number is on the unit match part number with replacement.
0helpful
1answer

How can I re-initialize and get the auto up/down working again on my Expedition driver window?

You don't say what method you used so try this -lower the window and contnue to hold the button down for another 5 seconds then raise the window a continue to hold the button down for a further 5 seconds hope this helps
4helpful
1answer

Pulled battery terminal on Chrysler 300c 2006. After reconecting , the power windows no longer go up automatically

If your vehicle is equipped with the "Express-Up" feature, the door module probably lost its calibration when the battery was disconnected. To recalibrate this feature, roll the windows all the way down. Then hold the button to the up position. Continue to hold the button up for two seconds after the window has reached the full up position. Roll the window down again and repeat this a second time. The express-up feature should now work for that window. Repeat this procedure for the other front window.
NOTE: the REAR windows are NOT EQUIPPED with this feature.
0helpful
1answer

VW GOLF ELECTRIC DRIVERS WINDOW

does the switch feel broken, loose, it may be sticking in the auto open/shut postions or could just be a bung regulator, very common on mark 4's? try vwwatercooled.org.au :) cheers Chas
1helpful
1answer

2003 F250 Power Windows won't work

check fuses 35 & 41 (10 amp, red).
it also shows an accesory delay relay in the fuse panel.
And fuse 601? 30 amp.

make sure you don't have lock-out on driver switch panel activated.

Power Window System
Features and Operation
NOTE: The accessory delay feature will allow power window operation up to 10 minutes after the ignition is off or until a door is opened.
If equipped with power windows, the window control switch (14529):
  • will operate the power windows only when the ignition switch is in the RUN or ACC position.
  • is located on each front door trim panel, and Crew Cab and Excursion rear door trim panel.
  • may be used to raise or lower the driver side, passenger side and rear windows from the LF control on the driver side, or the passenger window from the passenger switch.
  • includes a one-touch down (OTD) feature for the driver door window.
  • can partially lower the driver side window when the LF window control switch is depressed half way (first detent).
  • will completely lower the driver side window when the LF window control switch is fully depressed and then released (second detent).
Power Window System — Modes of Operation
There are two modes of operation for the power window system.
Manual Mode
When the LH window control switch is pressed to the first down position, the window will move down until one of the following conditions are met:
  • The LH window control switch is no longer in the first down position.
  • The LH window control switch is pushed to the OTD position, causing the windows to enter auto mode.
Auto Mode
Auto mode provides the OTD feature. The OTD feature is activated when the LH window control switch, for the LH window, is pressed to the second down position.
Auto mode will be terminated when any of the following conditions are met:
  • The LH window control switch is pushed to the UP position.
  • The LH window control switch is released (OFF position) and then moved to the DOWN position (first detent) or OTD position (second detent).
  • Note: Delayed accessory feature must be active.
The OTD feature is controlled by the window control switch.

---------------------------------------------------------
Condition Possible Sources Action
  • All power windows are inoperative
  • Fuse(s).
  • Circuitry.
  • LF window control switch.
  • Accessory delay relay.
12helpful
5answers

2004 Saab 9-3 Window reset

I had the problem of the drivers window rolling back down. This was fixed by removing the electrical connector located behind the door hinge. It looks like an oblong block. You have to prise the top ribbed part right up then pull the block out. Leave out for about 1 minute. Replace it
14helpful
3answers

Driver side window bumps down when closed.

Turn the key on

Press the window switch, lower the window, continue to hold the window switch down for 15 seconds after the window is completely lowered Don't use the auto feature

Pull the window switch up, raise the window, hold the button up for 15 seconds after the window is fully up. don't use the auto feature

Try the auto down feature again, see if it now works.

0helpful
1answer

Driver Door Not Working Right...HELP!!!!

the master control switch on the drivers door needs to be replaced and it will be fixed.
1helpful
1answer

My eCU computer shot or is it the auto shut down relay?

It's under the hood usually on the driver side fender well. It's commonly known as an ASD Relay. Check the electrical part of the ignition switch. The "on" position of the ignition switch may not be working either.
Not finding what you are looking for?

59 views

Ask a Question

Usually answered in minutes!

Top Mercury Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...