Question about 2008 Dodge Magnum

1 Answer

I tried cranking up my car and it did not turn over so i just replaced da battery and it is still doing da same before i changed da battery what could da problem be?

Posted by Anonymous on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

THE problem could be in a few different places within THE ignition modules. We have THE same problem and are in THE middle of finding THE answer. We take THE car to THE dealership, they say pay $70.00 and they will diagnose THE problem. Stubborn as my husband is, he chooses to pay to get a new remote, key and reprogram the security. That didn't work, so they suggested it may be the wind module, ok we fixed that, still not the problem. So now he finally decides he will pay THE $70.00 for them to diagnose THE problem. Will let you know THE results. Save yourself THE time and money.....and just pay to have THE problem diagnosed.


Posted on Jul 02, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My audi19 tdi if I let it stand for a while then I have to crank it several times before it starts,n clouds of black smoke comes from da exhaust,what can n da problem


Should have glow plugs installed.
try leaving the ignition on for a few seconds rather than cranking.
leaves time for the plugs to warm up.
may need replacing.

May 13, 2014 | Cars & Trucks

1 Answer

I have a 1991 MR2 2.2L non turbo automatic transmission. My cars lights were left on, I was not present but they could not jump start the car. I replaced the battery and the car will not start. The da


trouble with this is. it can be the electrical part of the ignition switch needing changed..as has failed or beak in the wiring at the solenoid on top of the starter. is sticking .get someone to turn your key at the same time you hit the top of your solenoid .if it start that way .change the starter.

Dec 13, 2013 | 1991 Toyota MR2

1 Answer

I have a 94 caprice lt1 5.7 I brought a brand new battery for it and when I turn it over it don't say nun at all no lights or nothing come on but da battery has juice


I dont know which model you have. My sons 94 caprice classic fully loaded he got used at an auction. Didnt know it at the time but it was one a cop car. Look on the front of engine under the crank case there should be something called an optispark on it. It has four wires coming out of either side and they run back to your plugs. Thats what was happening to my sons

Aug 04, 2012 | 1994 Chevrolet Caprice Classic

1 Answer

1997 jeep grand cherokee limited only stays crunk if foot is on the gas, and if the rpm meter gets low enough it acts like it wants to cut off. Once it cuts off, it won't crank back unless it is jumped an...


I can give you something to try. Since the Jeep is a chrysler product, chrysler vehicle computers run off of the battery and in most cases at idle the alternater is not pushing a ramped charge. Try cleaning the battery terminals and see how it goes. I have found that it works in most cases and is the easiest to do. Let me know how it goes.

Jan 14, 2011 | 1993 Jeep Grand Cherokee

1 Answer

My battery died after leaving my lights on, I replaced da battery. All the lights come on, but it will not crank over or start?


check your alarm system...its been set...Use your key in the driver door lock/unlock to reset system...good luck

Dec 23, 2010 | 2001 Acura 3.2TL

2 Answers

Unable to start but lights came on battery is said to not be the problem then tried module but states a new battery was put in because it wont hold the charge still do not know what the problems is


sounds like a bad starter, test for power with a testlight,have someone crank the engine while you check for power at starter , the small wire should have power when key is in start position. if theres power then replace starter, hope this helps good luck.

Oct 23, 2009 | 2003 Saturn ION

1 Answer

Electrical problems


no you may have a short in the battery

Feb 23, 2009 | 1996 Nissan Maxima

Not finding what you are looking for?
Cars & Trucks Logo

111 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8522 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...