Question about 2001 Audi A4

1 Answer

Fill transmission fluid

Where do I fill the transmission fluid, where is the plug to fill the transmission fluid?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 3,513 Answers

Hi,

Please check the bellow link to get the instruction of filling transmission fluid in your Audi car…
http://www.blauparts.com/audi/audi_fluid/audi_automatic_transmission_fluid.shtml#howtochangeaudiautomatictransmissionfluid
Let us know if you want something more else please ‘accept’ the solution.

Thank You for contacting Fixya.com

Posted on Jun 07, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where do I pour transmission fluid at


CAUTION: The engine must be running when the transmission fluid fill plug is removed, or excessive fluid loss will occur. Transmission fluid may be hot. Since the actual fluid level is unknown, stand clear when removing the fill plug. Have a container ready to capture any lost fluid. Do not turn the engine off with the fill plug removed, as you can be injured by hot transmission fluid being expelled out of the oil fill opening.
48f3cbbe-7db7-4b3f-a212-587b374741ab.jpg

Jan 25, 2014 | 2001 Chevrolet Corvette

1 Answer

How many qts of oil do i need


Depends on your engine.

1980 JEEP CJ-7 2.5L 4-cyl Engine Code [B]
CAPACITIES
Engine, GM without filter..........2.4 quarts[1]
Wix Filter ........ 51040
Cooling System, Initial Fill..........8.0 quarts
Automatic Transmission, A904, 30RH Initial Fill..........4.0 quarts[2]
Automatic Transmission, A999, 32RH Initial Fill..........4.0 quarts[2]
Automatic Transmission, Total Fill
3 speed A999, 32RH..........8.4 quarts
3 speed A904, 30RH..........7.0 quarts
Manual Transmission, 4-SPD, SR-4..........3.0 pints
Manual Transmission, 4-SPD, T176..........3.6 pints
Differential, Front..........2.5 pints[3]
Differential, Rear..........4.9 pints
Transfer Case,..........4.0 pints

1. Add extra oil when replacing filter. After refill check oil level.
2. With engine automatic transmission operating temperature, shift through all gears.
Check fluid level in NEUTRAL and add fluid as needed.
3. 1984-1992 Models with command-Track, add 5 oz of 75W-90 GL-5 to shift motor housing opening.

TORQUES
Oil Drain Plug.....25 ft-lbs
Manual Transmission T176
Fill Plug.....15 ft-lbs
Drain Plug.....15 ft-lbs
Manual Transmission SR4
Fill Plug.....20 ft-lbs

1980 JEEP CJ-7 4.2L 6-cyl Engine Code [C]
CAPACITIES
Engine, without filter..........5.0 quarts[1]
Wix Filter..... 51522
Cooling System, Initial Fill..........11.0 quarts
Automatic Transmission, A904, 30RH Initial Fill..........4.0 quarts[2]
Automatic Transmission, A999, 32RH Initial Fill..........4.0 quarts[2]
Automatic Transmission, Total Fill
3 speed A999, 32RH..........8.4 quarts
3 speed A904, 30RH..........7.0 quarts
Manual Transmission, 4-SPD, SR-4..........3.0 pints
Manual Transmission, 4-SPD, T176..........3.6 pints
Differential, Front..........2.5 pints[3]
Differential, Rear..........4.9 pints
Transfer Case,..........4.0 pints

1. Add extra oil when replacing filter. After refill check oil level.
2. With engine automatic transmission operating temperature, shift through all gears.
Check fluid level in NEUTRAL and add fluid as needed.
3. 1984-1992 Models with command-Track, add 5 oz of 75W-90 GL-5 to shift motor housing opening.

TORQUES
Oil Drain Plug.....30 ft-lbs
Manual Transmission T176
Fill Plug.....15 ft-lbs
Drain Plug.....15 ft-lbs
Manual Transmission SR4
Fill Plug.....20 ft-lbs

1980 JEEP CJ-7 5.0L 8-cyl Engine Code [H]
CAPACITIES

Engine, without filter..........4.0 quarts[1]
Wix Filter..... 51258
Cooling System, Initial Fill..........13.0 quarts
Automatic Transmission, A999, 32RH Initial Fill..........4.0 quarts[2]
Automatic Transmission, A904, 30RH Initial Fill..........4.0 quarts[2]
Automatic Transmission, Total Fill
3 speed A904, 30RH..........7.0 quarts
3 speed A999, 32RH..........8.4 quarts
Manual Transmission, 4-SPD, SR-4..........3.0 pints
Manual Transmission, 4-SPD, T176..........3.6 pints
Differential, Front..........2.5 pints[3]
Differential, Rear..........4.9 pints
Transfer Case,..........4.0 pints

1. Add extra oil when replacing filter. After refill check oil level.
2. With engine automatic transmission operating temperature, shift through all gears.
Check fluid level in NEUTRAL and add fluid as needed.
3. 1984-1992 Models with command-Track, add 5 oz of 75W-90 GL-5 to shift motor housing opening.

TORQUES
Manual Transmission T176
Fill Plug.....15 ft-lbs
Drain Plug.....15 ft-lbs
Manual Transmission SR4
Fill Plug.....20 ft-lbs

Oilman

Feb 02, 2013 | 1984 Jeep CJ7

1 Answer

How to check transmission fluid in manual transmission


The transmission case has a lower drain plug and an upper fill plug on the side of the transmission case. You need a special 17mm Allen wrench to remove the drain and fill plugs on the ******.Open the upper fill plug and add the specified GM ****** fluid till it dribbles out the fill plug hole.

Oct 14, 2012 | 1998 Chevrolet Chevrolet silverado

2 Answers

I cant check fluid in transmission no dipstick


THE 4T40 E 4T45 E AND 4T65 E THESE TRANSMISSIONS DONT HAVE A FILL TUBE WITH DIP STICK.THOSE TRANSMISSION VECHICLE HAS TO BE PUT ON A LIFT AND LEVEL. TRANSMISSION HAS A FLUID CHECK PLUG LOWER HOUSING TRANSMISSION JUST ABOVE THE OIL DRAIN PLUG.TO CHECK FLUID TRANSMISSION NEED TO BE OPERATING TEMPERATURE. WITH ENGINE RUNNING AND TRANSMISSION FLUID PLUG REMOVE IF TRANSMISSION FLUID POURS OUT. CHECK PLUG HOLE.YOU HAVE TOO MUCH TRANSMISSION FLUID IN TRANSMISSION.IF FLUID DONT DRIP OUT HOLE NEED TO ADD A PINT AT A TIME.IF FLUID DRIPS OUT SLOWLY FLUID CORRECT TO POUR TRANSMISSION IN TRANSMISSION RAISE HOOD LOOK ON TOP TRANSMISSION ON DRIVER SIDE FOR A RED VENT FILL PLUG.REMOVE PLUG USING A LONG LONG FUNNEL POUR TRANSMISSION FLUID IN THE VENT FILL PLUG HOLE.THIS VECHICLE THE DEALERSHIP HAS TO CHECK FLUID USING A LIFT.YOU CAN DO THIS JOB BUT IT WILL VERY DANGEROUS YOU CAN PUT CAR ON JACK STANDS WITH VECHICLE SITTING LEVEL. BUT THE DANGER PART COMES YOU HAVE TO SLIDE UNDER THE CAR WHILE ENGINE RUNNING TO CHECK FLUID.IF YOU DO THIS JOB HAVE FRIEND OR HELPER AROUND DONT WORK UNDER CAR BY YOUR SELF ALWAYS KEEP CELLUAR PHONE ON HAND FOR EMERGENCY.

Aug 11, 2011 | Chevrolet Cavalier Cars & Trucks

3 Answers

I cannot find the transmission dipstick


TRANSMISSION DONT HAVE DIP STICK,YOU HAVE A CHECK PLUG LOCATED UNDER TRANSMISSION NEAR THE PAN ADJACENT TO THE ENGINE OIL DRAIN PLUG.CHECK PLUG IS A METRIC 11M OR 12M METRIC BOLT.TO CHECK FLUID CAR HAS TO BE LEVEL AND ENGINE RUNNING.WHEN YOU REMOVE CHECK PLUG, IF FLUID POUR OUT YOU HAVE TOO MUCH TRANSMISSION FLUID IN TRANSMISSION, IF FLUID SLOW DRIP YOU HAVE ENOUGH FLUID IN TRANSMISSION, IF NO FLUID DONT DRIP OUT WHEN CHECK PLUG REMOVED,ADD A PINT OF TRANSMISSION FLUID AT A TIME.YOU POUR FLUID AT TOP OF TRANSMISSION UNDER THE HOOD,YOU WILL SEE A RED VENT FILL CAP, REMOVE CAP, YOU NEED A VERY LONG FUNNEL TO POUR TRANSMISSION FLUID IN THE TRANSMISSION. IF YOU HAVE TRANSMISSION SHIFTING OR SLIPPING PROBLEMS,MOST TIME TRANSMISSION DUE FOR FILTER AND FLUID CHANGE IF YOU AT THE 60000 MILES TO 120000 MILES TIME FOR FLUID AND FILTER CHANGE.

Apr 08, 2011 | 2001 Pontiac Grand Am SE

2 Answers

How do i check tranmision fluid on a 2004 ford exployer xlt. It has no dipstick to check level or to add fluid.


On transmission pan drain plug will have a small hex screw in the center of drain plug, with engine running and in park remove little center screw, if fluid comes out, transmission level is good, of no fluid come out, will have to pump fluid in that same little plug hole, till fluid starts to come out.

Aug 05, 2010 | 2004 Ford Explorer

1 Answer

How do i put in transmission oil 2004 volkswagen passat


There is no dipstick on these vehicles like u will find on older american cars.

The transmission fluid can only be checked when the transmission fluid temperature is between 35 to 45 degrees celcius.

The only way to know the fluid temp is with a diagnostic scan tool. At that point you remove the fill plug in the bottom of the transmision pan and fill with fluid until fluid drains back out. Use only genuine VW fluid part number G 052162A2 or you will damage the transmision. If you fill with fluid while tranny is to cool you will over fill and damage the transmission. If you fill with fluid when the tranny is to hot you will underfill and run a slight risk of damaging the transmission. The fill plug and drain plug are next to each other so make sure you are removing the right one.

Jul 18, 2010 | 2004 Volkswagen Passat

2 Answers

How do i put fluid in the transmission there is no


On the passenger side of the transmission, there is a fill plug and a drain plug. The fill will be the upper plug and it's the one you use to check to make sure you have the right amount of transmission fluid in your transmission. Manual Transmission, NV3500..........2 liters Manual Transmission, NV1500..........2.7 liters

Undo the plug with a wrench and if the transmission trickles out, your good to go. If there is no fluid trickling out, top it off and place the plug back in and tighten to (Manual Transmission NV1500 Fill Plug 17 ft/lbs) or (Manual Transmission NV3500 Fill Plug 44 ft/lbs)
Thank you for using fixya and be safe. Drain Plug 44 ft/lbs Drain Plug 27 ft/lbs

Apr 18, 2010 | 1996 GMC Sonoma

2 Answers

Fill tube for the transmission location


Hahaha..! Thats a funny response, but not a solution.

Assuming you're talking about the automatic transmission, there is no fill tube for your transmission. To fill the transmission, check the fluid level, or top off the fluid level, you will need a few different (non-traditional) tools. You will need some way to pump fluid up into the transmission from below due to the fill port being on the bottom of the transmission fluid pan. A bottle of transmission fluid (Dextron III) and a screw on fill tube from WalMart or Autozone can be used to fill the transmission with fluid.

Service to this transmission can be a fairly messy task. Operating temperature must be attained prior to fluid level adjustment. Once operating temperature has been achieved, two drain plugs should be located on the main transmission fluid pan. One plug is positioned vertically higher than the other. With the engine idling, remove the higher plug. When this plug is removed, fluid shouldn't flow from the hole profusely. If it does, then that's an idication that the unit is overfilled. If no fluid flows from the hole at all, then it may be an indication of a low fluid level. Use the desired devised method to pump fluid into the higher plug hole until fluid begins to leak from the plug hole. Once this occurs, then the plug must quickly be reinstalled.

It's messy and inconvenient; I know. Thank you to the General for the transmission and adventures with hot trans. fluid. Gee.., another good example of why Toyota passed ya up

Nov 16, 2009 | 1997 Isuzu Rodeo

1 Answer

How do you check the transmission fluid -wheres the dip stick


According to the manual if the transmission is leaking fluid or shifting incorrectly take it to the dealer. Other than that the service interval for filter and fluid change is 100,000 miles. There is a 7/16 plug on the transmission case you have to be under the car to see it. it is located on the backside near the right axel. You take it out and put in transmission fluid till it comes out the plug hole. The fill plug is accessed from engine compartment,you will need a long funnel to fill. It's a must take it to a Dealer for service unless you want to try to service it your self. Good luck friend. 
Here is how you add fluid:Start the engine and allow the engine to idle until the transmission fluid temperature has reached the value specified. 
Depress the brake pedal and move the shift lever through the gear ranges, pausing a few seconds in each range. Return the shift lever to the PARK range. Remove the fluid vent cap. 
Raise the vehicle on a hoist. The vehicle must be level, with the engine running and the shift lever in the PARK range. Caution: The engine must be running when the transmission fluid fill plug is removed, or excessive fluid loss will occur. Transmission fluid may be hot. Since the actual fluid level is unknown, stand clear when removing the fill plug. Have a container ready to capture any lost fluid. Do not turn the engine off with the fill plug removed, as you can be injured by hot transmission fluid being expelled out of the oil fill opening. 

Remove the transmission oil level control plug.147643_trans_1.jpg this trans only has a fluid vent cap that you can unscrew to add fluid.

Jul 15, 2009 | 2003 Pontiac Grand Am

Not finding what you are looking for?
2001 Audi A4 Logo

793 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audi Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

75077 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14223 Answers

Are you an Audi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...