Question about 1994 Plymouth Voyager

2 Answers

My 94 voyager is pulling left and makes a popping sound whenever I turn. a shop told me I need to replace the sway bar. how do I do that?

Posted by on


2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 972 Answers

No a sway bar has nothing to do with it. probably have a real bad cv axle joint. look to see if boots on them are torn.then replace with complete reman axle shaft[ about 75 dollars U.S.] a cv joint binding real bad could cause a pull, but so can bad wheel bearings wich would make some popping grinding etc. sounds.

Posted on Jun 07, 2010

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert whose answer got voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 55 Answers

That does not sound like an accurate diagnosis to me. A sway bar controls how much the vehicle lists over during a turn. A popping sound is generally a CV or constant velocity joint going bad. This is a universal type joint on your shaft that goes from your transmission to your wheel. The pulling is generally and a alignment problem which requires that the tie rods be adjusted or replaced if they are sloppy. Pulling can also be a result of seized brake calipers or uneven wear are responding breaks.

Posted on Jun 07, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

What does Bad cv joints noise sounds like?

That definitely sounds like a cv joint issue...the turning part was a dead giveaway. Though it only happens occasionally when turning, you'll see (or in this case hear) it more frequently as they get worse. Best case scenario could be that they need to be greased instead of of luck!

May 09, 2014 | Chrysler Sebring Cars & Trucks

1 Answer

I have an issue with my 04. Chevy Cavalier ! We were driving and all of a sudden it pulled to the left! Took the car back home to check things out.... Looks as though the control arm is broke. It seems...

A sway bar issue wouldn't make it suddenly pull anyway.
It sounds like what you're seeing is a failed ball joint. THAT will cause the problem you're having, AND it fits the description of what you're looking at.
Thanks for using Fixya.

Jul 29, 2013 | Cars & Trucks

1 Answer

My mechanic told me that the sway bar was broken on my 1996 hyundai accent. what parts will need to be replaced to fix the problem?

First you should have been in the service bay under the car
& seen what you were told or even paid for
That was mistake #1 both on your part & the repair shops

Second ---why not have it repaied when it was there,or at
least share the whole story with us

No one on this site siad if they even have tools or why there here

How would spomeone know what parts need to be replace
There are 500 different makes & model vehicle out there

What were you told broke related to the sway bar?
We actually know less than you do. you at least were told

Jul 13, 2011 | Hyundai Accent Cars & Trucks

1 Answer

Symptoms: rattling noise coming from front end of 98 explorer, pulls at the least little bumps, eats up front tires like crazy. Doesn't feel safe driving. What I've been told already: upper and lower...

definitely sounds like a ball joint problem, bushings would not cause it to chew up tires a worn moving mechanical part would such as steering components,wheel bearings,ball joints, and believe it or not shock absorbers

Jul 22, 2017 | 1998 Ford Explorer

1 Answer

How to change 1998 Plymouth grand Voyager front sway bars

unbolt the sway bar links from the control arms and the two brackets holding it to the frame. make sure if you jack it up jack up the front end. if you jack up one side and not the other and take the sway bar loose it will be loaded and could cause injury if not careful as long as both front tires are off the ground the sway bar will not be loaded and will be safe to deal with

Oct 19, 2009 | 1998 Plymouth Grand Voyager

2 Answers

I have a 1999 Plymouth Gr Voyager and all of a


Sep 18, 2009 | 1999 Plymouth Grand Voyager

3 Answers

Pontiac Grand Am Popping sound when the wheel is turned

sounds like a half shaft to me try turning in a tight circle and see which side it clicks on left or right
make circles in both directions

Apr 15, 2009 | Pontiac Grand Am Cars & Trucks

1 Answer

2002 chry. Voyger has front end knocking noise when going over bumps.

Get someone to help you with this: Reach behind the front wheel just rearward of the strut and you'll find a vertical rod that bolts to the strut just below the spring perch and the other end goes to the sway bar. Hold it and get someone to rock the van as hard as they can. There's and astronomically good chance you'll feel a popping in this rod. If you do, you need to replace it. It's called a sway bar link. You'll need 2 of them and the sway bar bushings as well. Spray the nuts on the links down real good with wd40. Hold the back side with a pair of channel locks to keep the ball joints in them from turning. I take the top nuts off first, then the sway bar bushings so I can move that thing around to gain access to the bottom nuts. Then put them back in reverse order. Remember this, if you do it, no matter what anyone tells you, DO NOT lubricate the sway bar bushings. After the first rain, they'll start squeaking and they'll NEVER stop. They are supposed to go on dry.

Apr 13, 2009 | 2001 Chrysler Voyager

1 Answer

Front Left Sway Bar Link

The front stabilizer shaft (sometimes called a sway bar) is mounted to the top rear of the frame and to the lower control arm. The shaft is attached to the frame with clamps and rubber insulators and to the control arms with insulator links.


Jul 08, 2008 | 2004 Pontiac Grand Prix

Not finding what you are looking for?
1994 Plymouth Voyager Logo

151 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts


Level 3 Expert

79186 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8836 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides