Question about 1998 Chevrolet Venture Cargo

2 Answers

Crank shaft pulley on chevy venture not inline with other pulleys ?

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 89 Answers

Hi, if this is the case on your vehicle, you need to get it to a shop to have inspected sooner than later. if this problem is the crankshft pulley out further than the rest of the pulleys, the harmonic balancer is coming apart most likely. if this does occur, it may spin off at very high rpms and tear up whatever gets in it's path insode the engine compartment. could be very costly. side note: i once saw a harmonic balancer come apart on a 9 second drag racing car and it ripped through the passenger seat area and went out the back window, not at all likely to happen to your van, since you're not reving at 7000 plus RPM's, but just an idea.

Posted on Jun 07, 2010

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 220 Answers

YOU MIGHT TRY TIGHTENING THE CRANKBOLT ON THE FRONT OF THE PULLY.

Posted on Jun 07, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do I intall a new fan belt on a 2004 envoy. I am not sure witch way it goes around the fan


If there is no diagram pasted in the engine compartment, check your owner's manual...or else go to your local auto store warehouse or Chevy dealership...usually the parts counter person can print out the diagram specifically to your vehicle. Since you did not mention the engine specs- I'm going to generically how to install a serpentine belt.

1.) make a loop and slip the loop around the crank shaft pulley
2.) continue looping the belt around the water pump pulley
3.) ...around the A/C pulley
4.) ...and around the idler pulley
Skip the alternator pulley for now- you want to do that one last.
5.) Continue placing the belt around the power steering pump pulley
6.) and over the belt tensioner pulley
7.) Now move the belt tensioner position so that you can loop the belt over the alternator.
8.) Now double check to make sure that the belt is properly and securely fastened around each pulley's grooves. Don't start the motor until you are absolutely sure... and can visually verify that the new belt is installed properly. And don't have anyone (or pets) standing around the car or open engine compartment when you initially start the car just in case the belt breaks...serious injuries can occur!
I've attached a generic drawing it may or may not fit the description of your auto.

25449384-zbt03x4ihgejmj4dkpthkhgv-2-1.gif

Feb 19, 2015 | 2004 GMC Envoy

1 Answer

Crankshaft Pulley 2001 Chevy Malibu coming out. Through Belt how do I get it back aligned?


Hi Crystal,
You will need to know if the crank shaft pulley is coming apart or missing the lock down nut. The ring on the outer edge of the pulley is held in place by molded rubber, I would think this will be your problem.

Feb 05, 2014 | 2001 Chevrolet Malibu

1 Answer

Crank shaft pulley


crank sensor damaged when changed crank pulley.

Aug 05, 2012 | Toyota Camry Cars & Trucks

1 Answer

I have a 2003 Chevy Venture and we replaced the belt, the tensioner and the powersteering pump and the belt still keeps coming off. What could be the cause?


One or more of the pulleys are out of alignment. It may be caused by a bad bearing in one of the pulleys or loose bolts holding them in place. Check all the adjusting bolts and the bolts holding the belt on things like the crank, fan, alternator, etc.

Dec 19, 2010 | 2001 Chevrolet Venture

3 Answers

How to set timing when you relesh tensioner and it changes the alignment postion of pullies 2000 ford ranger 2.5 l


Here is the trick. Align marks. Put the timing belt on the crank shaft pulley first, and after on the overhead cam pulley. Release tensioner and rotate the crank shaft till the timing belt makes two full circles. Try to align marks, you will be at least one tooth off. Align the crank shaft on the mark, and find out how many teeth you are off at the cam shaft pulley. Count the teeth. Remove the timing belt from cam shaft pulley only. Move cam shaft pulley in reverse according to the number of teeth you counted. Make sure the crank shaft pulley is on the mark. Mount the belt at cam shaft pulley.Rotate the belt two circles and check the marks. Repeate this procedure til after releasing the tensioner, and rotating the timing belt two full circles, the mars will be align.

Nov 22, 2010 | 2000 Ford Ranger SuperCab

1 Answer

Bottem pulley on engine block is making noise, I think the bearings are going out. What is this pulley attached to and can it be lubricated?


the bottom pulley is the crank pulley. It is attached to the crank shaft. It has two parts, an inner and an outer that are joined together with a rubber isolator. Over time the rubber breaks down and the inner part part of the puller will start to rotate independently from the outer part of the pulley creating a unigue clacking noise.

To solve this you'll need a standard crank pulley puller set. You'll remove the crank bolt and then use the pulley puller to pull the crank pulley off of the crank shaft. The install the new pulley making sure to torque the crank pulley bolt to the proper spec.

Nov 06, 2010 | 1998 Buick Park Avenue

2 Answers

Where is the crank sensor located on a chevy malibu 2001


It should be down near the crankshaft pulley. Remove the the right front wheel and the splash shield, it should be there next to the pulley.

Dec 20, 2009 | 2001 Chevrolet Malibu

1 Answer

Crank shaft pulley


Not too hard if you have a pulley puller. Remove the belt, remove the crank shaft bolt, pull the crank pulley off, then reinstall in reverse order.

Jul 02, 2009 | 1990 Oldsmobile Cutlass Ciera

1 Answer

Chevy camero


the bottom pulley on your engine is attatched to your crank shaft.

Oct 12, 2008 | 1989 Chevrolet Camaro

1 Answer

Crankshaft pulley removal - no clearance between frame!


Put a jack under the engine. Loosen the upper engine mount bolts and lower the engine until you have enough clearance.

Jul 12, 2008 | 1999 Chevrolet Metro

Not finding what you are looking for?
Cars & Trucks Logo

473 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...