Question about 1996 Isuzu Rodeo
Timimg marks for camshafts are notched in the top of the cylinder head. they shuld line up directly in the middle of the 2 smaller cam gears behind the new belt should come with lines on it to make it easier crank to be lined up with keyway slot to the right again the belt should have a ditted line on it for that remember remove the tensioner pushrod assembly and put it in the vice to depress it line the holes up in the body of it and put a 1/4 in allen key through it when you refit remove the key turn it over twice all good
Posted on Jun 07, 2010
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Heres two diagrams for aligning the timing gears for timing belt, this is for a 1999 rodeo with the 3.2 engine, hope this helps,one diagram is for the cams and the other is for the crank gear,
Posted on May 20, 2010
Remove belt, fan, fan shroud and fan bracket. Remove timing covers, timing belt and water pump. Replace timing belt and the hydraulic tensioner with new ones. I suggest you get a mechanic to do this as you can easly get it out of time. Not an easy job.
Posted on Jul 03, 2009
You have to both check and add fluid to these vehicles from underneath the vehicle. Find the transmission fluid pan and you will find two plugs. The lower plug will drain the pan and the upper one you can add fluid or check the fluid level. You will know that the level is correct when the plug is out and fluid barely leaks out of the hole. You don't want a lot coming out because you don't want to overfill. In order to get it into the hole you have to be some sort of tube to attach to the top of the bottle. They sell these types of tubes at your auto part store and they just screw on. It is very awkward, but you can actually put the bottle high enough to get the fluid in if you put it right to the left of the pan. The first time I did this on mine it was a pain but once you figure it out you will be good to go. Let me know if you have any other questions about your vehicle. Thanks for rating my response and for using FixYa!
Posted on Jul 19, 2009
Tips for a great answer:
Jan 12, 2012 | 1996 Isuzu Rodeo
Oct 06, 2011 | 1996 Isuzu Rodeo
Feb 10, 2011 | 1998 Isuzu Rodeo
May 14, 2010 | 1996 Isuzu Rodeo
Mar 12, 2010 | 1996 Isuzu Rodeo
Dec 23, 2009 | 1996 Isuzu Rodeo
Oct 14, 2009 | 1992 Isuzu Rodeo
Jul 03, 2009 | 1996 Isuzu Rodeo
Apr 18, 2016 | 1996 Isuzu Rodeo
1,445 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: