Question about Mercedes-Benz C230

Open Question

The keys of my mercedes C200 (W203 2006) cannot lock/unlock doors till they are placed very close (a few inches) from the driver door sensor. I have changed the SAM unit (a sensor unit located at the rear part of the car) and changed batteries in the keys but the problem persists. Please help. (the keys still can ignite the engine). Paul Kan

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
onyeredson
  • 404 Answers

SOURCE: mercedes 1999 c200 key fob

Hello Haq!
Could it be the key just needs re-coding? maybe you are worrying to much as £177 would be about right as that would need coding etc., Try phoning your local Merc dealer or take the key and V5 to them for coding (Hopefully)
Good Luck!
Paul 'W'
Onyer~EDson(:0)~[><

Posted on Jan 06, 2009

Ad

SOURCE: Ignition Won't Unlock

You have to change out the ignition I just went through that with mine 2000 and it had to do with the button on the gear shift and lock in ignition switch.
It cost me around 400.00

Posted on Feb 12, 2009

emissionwiz
  • 76848 Answers

SOURCE: my mercedes c200 kompressor coup keys wont unlock

are the batteries ok, u don't say.

Posted on Sep 17, 2009

  • 1 Answer

SOURCE: Key fob won't unlock or lock car VW Golf 2000

my mum had a similar problem and it turn out the code the key transmits to the engine had gone wrong she took it to a vw dealer and they reprogrammed the key. it works fine now and is a common problem. hope that helps

Posted on Sep 18, 2009

  • 15 Answers

SOURCE: My display lights on my Mercedes Benz Audio 10

You can go to a auto zone or a mercedes authorized repair shop and have them hook it the machine and do a computer read and test it will tell what the problem is if you go to Auto zone I dunno If you have one its free anywhere else they may charge.

Posted on Nov 04, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Keyfop wont operate drivers door on 2001 c200


do you mean the drivers door won't unlock or lock ? does your spare key work ? does it work from the switch inside the vehicle ? does the little red light flash on the key ?

Dec 29, 2012 | 1998 Mercedes-Benz C-Class

1 Answer

My car mercedes c200 model 1995 problem with door lock it not open with remote .my remote is ok what i do


You need to re-sync it with the car. Open the door with the blade key and insert the key in the ignition. If the ignition light then the key has been reset.
If it does not you need to resit it. Place the key into the ignition, it may not turn at all, thats ok. Press the "LOCK" button on the key 5 times in a row, about a second each press, then press and hold down the "UNLOCK" button for about 15 seconds.
This should reset the key.

Mar 15, 2011 | 1995 Mercedes-Benz C-Class

1 Answer

Security system went off after replacing battery now car wont start nor fuel pump will turn on.how do i fix


You might just need to reset it. Roll the drivers window down and close all the doors. Lock all the doors with the key ) turn the key to lock twice, The electric locks should lock all the doors. wail a few minutes and unlock and open the trunk with the key. relock the truck or just close it. unlock the drivers door with the key, twice. all the doors should unlock, get in and start the car. Now this does'nt always work. If it does'nt we'll make the system think it's running. Close and lock all the doors. open the hood and disconnect the battery, one ccable will be fine. wait a few minutes. Reach in though the open window and turn the key all the way on. Don't open the doors, go around and connect the battery hard so it does'nt jump or skip. Reach thought the window and start the car/ once it's running. turn it off remove the key and unlock the door from the inside and open the door ( as if you were inside.) get in and start the car and everything should be back to normal.

Nov 26, 2010 | 1997 Infiniti.5 J30

1 Answer

Doors do not centrally lock with fob or key (they close but open straight away). Onlu option is lock drivers side with key and then lock the other 3 doors manuually. Ford Fiesta Mark 6 in the UK


hi
you need to try a couple of diffrent things with this problem


1- get in drivers seat close doors and lock by hand
,
2- then put key in ignition and turn key till dash lights come on (do not start)

3- while key in ignition unlock doors with fob ,

4 - then lock again with fob while key in ignition.

5- then remove key exit car try locking doors from out side this should reset all your door locks

Oct 25, 2010 | Ford Fiesta Cars & Trucks

1 Answer

Keyless remote of C200


You need to reprogramme the remote control.

Aug 24, 2009 | 2000 Mercedes-Benz C-Class

1 Answer

What's the code so the doors don't lock automaticly....what a pain this feature is.


page 10 of the book for the durango

1. Close all of the doors.

2. Place the key in the ignition and cycle the key from the OFF position to the ON position for a total of four times ending in the ON position, do not start the engine.

3. Press the drivers side power door lock switch to lock the doors within 30 seconds.

4. You will hear a single chime when the programming is completed.

5. To activate the feature again, repeat the above steps.

...And from pages 12-13:

To unlock the doors and liftgate: Press and release the UNLOCK button on the key fob once to unlock the driver's door, or twice to unlock all doors and liftgate. The illuminated entry system will also come on. The system may be programmed to unlock all the doors, on the first press, using the following procedure:

1. Close all the doors.

2. Place the key in the ignition and turn the key between the OFF and ON position consecutively for a total of four times ending in the ON position (do not start the engine).

3. Press the driver's side power door lock switch to unlock the doors and within 30 seconds to lock the doors.

4. You will hear a single chime when programming is completed.

Aug 21, 2009 | 1999 Dodge Durango

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

254 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

yadayada
yadayada

Level 3 Expert

76848 Answers

Michael Contreras
Michael Contreras

Level 2 Expert

166 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...