Question about 2000 Chevrolet Blazer

1 Answer

LINCENCE PLATE LAMPS OUT - 2000 Chevrolet Blazer

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 55 Answers

Remove the bulb, look at it closely to see if the filament is broken. If so replace it. If not it may not be getting power to do to corrosion in the socket or a loose wire or connection somewhere. The easiest fix if the socket looks OK but is not getting power to it is to run a new wire from the taillight wire to it rather than trying to track down where the old wire goes and is connected to and is failing etc. If the socket is all corroded you may be able to use and sandpaper to clean it up but if it's too badly gone, you will have to replace it. dielectric grease is a type of Greece that you can use on bulb sockets and electrical connections that does not interfere with the electrical connection book and protect it from corrosion.

Posted on Jun 07, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2003 ford focus no taillights, license plate light. If it is a G.E.M.will it throw a trouble code? And if I have to replace it does any one know where the cheapest place to get one?


The G.E.M module isn't involved in turning on the license plate light's or the tail lights either ! Have you check the fuse's ? Do you know where the central junction box is ? F2.62 7.5 amp , F2.58 7.5 amp an F2.57 7.5 amp .
Parking, reversing and side lamps
  • The voltage for these lamps is supplied through the lamp switch.
  • The left and right-hand circuits are fused separately in the CJB.
  • The lamps will work when the lamp switch is set to "side lamps" or "headlamps".
  • Central Junction Box (CJB) (14A068) C270A
    behind dash panel, LH side

Nov 03, 2016 | Ford Cars & Trucks

1 Answer

Change license plate lights


remove the plastic cover on the car boot. There is some screws that you need to remove front the plastic cover to get access to the lamps that illuminates the licence plate.
Replace the small lamps and voila !!!

Feb 10, 2015 | 2006 Ford Focus

1 Answer

No tail lights


no (park -tail-running lights) is dash parking lamps glowing?
check the tail fuse yet?
94 accord
this circuit is huge, park/tail, up to 20 lamps. are all dead>?
front park, side park, tail park and dash lamps all out.
this i the red-blk feed. all comments , USA, as lighting varies by country. (laws)
license plate light dead too????????? that too is park
there is NO RELAY.
the fuse 32 feeds the HL (head light) switch and in PARK posistion
it feeds 12vdc raw power to all 38 lamps. (side corning lamps,etc)
the license plate lamp is key, there are 2 lamps.
and both probably are not out.
so if they are good lamps and both tail lamps are good and fuse
then they must glow, if one lamp shorts as 1156 or the like love to do
then it blows the fuse. as does the trailer jack (option) .

so fuse 32 park/tail blown
or HL park switch bad, if all 20 odd lamps dead. and fuse holds.
that simple, and this cars wiring is very simple and nice.

Feb 26, 2014 | 1994 Honda Accord

1 Answer

How to change a 2005 cadillac cts lincence plate bulb


No need to remove the lens, bulb comes out the back with a twist.

Aug 29, 2012 | 2005 Cadillac CTS

1 Answer

I noticed this to day even though i have day time running lights when are the licsense plate lamps on 2005 chevrolet impla suppose to be on


The licence plate lamps will come on when you turn on the headlight switch, not with the daytime running lamps. Hope this helps.

Oct 31, 2011 | 2005 Chevrolet Impala

1 Answer

I cant find my fuse for the license plate lamps. I was in an accident and one of them got smashed and the other is not lighting either. Im thinking its a fuse problem but there is no fuse dedicated to the...


hi.
most cars run licence plate lamps on the same fuse as the tail lights.
if your tail lights work, then it is more likely to be a fault on the bulbs or bulb holders, or the wiring in that area, probably caused by the crash.

i would recheck this area first, using new bulbs to rule these out.

May 13, 2011 | Nissan Xterra Cars & Trucks

1 Answer

Where is the fuse for the license plate lamp located


I'll tell you where the fuse is but I want to mention that if it is just the license plate lamps that are out you may have other problems. The fuse you are looking for also controls the power to the left & right back up lamps, the right park & stop lamps and I think the left turn signal but don't quote me on that. So as you can see this fuse covers more then just the lamps for the license plate. Anyhow the fuse you are looking for is in the fuse box located to the left of the steering wheel by the brake pedel. It is in the number 7 position (see picture below) and is a 15 amp blue fuse. I hope this helped and good luck.

clifford224_54.jpg

Feb 21, 2011 | 1999 Ford Windstar

1 Answer

Tag light is not working. is there a fuse that will get the light turned back on?


The fuse labeled REAR PARK LP 15A in the right instrument panel fuse box powers the rear park lamps, and the tag lamps. If your rear park lamps are working then you most likely need to replace the tag lamps (bulbs). Use the following procedure to replace the lamps.

To Remove:
  1. Remove the two mounting screws from the license plate lamp.
  2. Remove the license plate lamp from the rear bumper fascia.
  3. Remove the license plate lamp socket by turning it counterclockwise.
To Install:
  1. Install the license plate lamp socket by turning it clockwise.
  2. Position the license plate lamp to the rear bumper fascia.
  3. Install the license plate lamp mounting screws.

Feb 17, 2011 | 2004 Chevrolet Impala

1 Answer

2001 ford focus zx3


remove the whole unit its only a couple of 8mm nuts from the inside 15 min job including *** break

Oct 07, 2008 | 2001 Ford Focus

Not finding what you are looking for?
2000 Chevrolet Blazer Logo

Related Topics:

32 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...