Question about 1993 Honda Accord

1 Answer

Instrument panel lights for open doors come on periodically while driving but doors are closed

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 104 Answers

This may be due to the worn out door switch. Check all the door switch for the functionality. You may found one of them problem. Get it replaced. This could solve you problem.

Posted on Jun 07, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2005 toyota matrix that has a intermittent door ajar that flickers on my instrument panel ,also hearing loud static chatter in my radio now , any suggestions?


Sounds like a bad switch or needs adjustment .
On the back of the door their is a plunger type switch so when the door is closed its in off position when the door is open it slides out and makes the buzzers and some lights come on .I would start their.

Feb 27, 2017 | 2005 Toyota Matrix

1 Answer

My jeep interior lights won't go out unless I reset the battery and now it's got to where the instruments panel says the driver door is open and the lights won't go out and the windows won't go down


Look for broken wires inside the black boot from the body to the door . Very common ! Opening and closing of the doors over time they break .

Dec 27, 2016 | Jeep Cars & Trucks

1 Answer

My 2004 Pontiac grand am se1 acts like door is open and interior light stays on also does t lock on its own when in gear and lights don't blink and horn not honk when locking with key bob


Door ajar switch problem more then likely or wiring issue . The BCM - body control module won't turn off interior light , let door lock because it think's the door is open . The door ajar switch is a input to the BCM .

The first thing would be to have it checked for DTC'S - diagnostic trouble codes . Also check with an enhanced scan tool to see if the BCM shows ajar switch data (open or closed ? Do you know about body electronics ?
Body Control Module
The various BCM input and output circuits are described in the corresponding functional areas indicated on the BCM electrical schematics. The Body Control Module functions include the following:
?€¢
A/C compressor request. Refer to Air Temperature Description and Operation


?€¢
Remote Function Control. Refer to Keyless Entry System Description and Operation


?€¢
A/C cooling Fan. Refer to Air Delivery Description and Operation


?€¢
Audio Delay Power. Refer to Radio/Audio System Description and Operation


?€¢
Exterior and interior lighting control. Refer to Exterior Lighting Systems Description and Operation


-
Daytime running lights (DRL)


-
Automatic lighting control


-
Fog lamps


?€¢
Interior lighting. Refer to Interior Lighting Systems Description and Operation


?€¢
Battery rundown protection (Inadvertent Power). Refer to Interior Lighting Systems Description and Operation


?€¢
Chimes. Refer to Audible Warnings Description and Operation


-
Key-In-Ignition


-
Head Lamps On


-
Seat Belt Not Fastened


-
Turn Signal On


-
Park Brake Warning


-
Door Ajar Warning


-
Check gages


?€¢
Gage control. Refer to Instrument Cluster Description and Operation in Instrument Panel, Gages, and Console.


?€¢
Instrument cluster indicator control. Refer to Instrument Cluster Description and Operation in Instrument Panel, Gages, and Console.


?€¢
Theft deterrent. Refer to Theft Systems Description and Operation .


?€¢
Engine coolant level sensing. Refer to Cooling System Description and Operation .


?€¢
Washer solvent level sensing. Refer to Wiper/Washer System Description and Operation in Wipers/Washer Systems.


?€¢
Key-in-ignition sensing. Refer to Audible Warnings Description and Operation in Instrument Panel, Gages, and Console.


?€¢
Seat belt use sensing. Refer to Seat Belt System Description and Operation .


?€¢
Brake fluid level sensing.


?€¢
Parking brake state sensing.


?€¢
Rear compartment interface. Refer to Power Door Locks Description and Operation


?€¢
Horn interface.


?€¢
Door lock interface. Refer to Power Door Locks Description and Operation


?€¢
Bulb Check. Refer to Instrument Cluster Description and Operation in Instrument Panel, Gages, and Console.

Oct 24, 2016 | 2004 Pontiac Grand Am

1 Answer

What color are the wires that go from door switch to dome lights on a 2005 mustang v6 conv.


The door switch doesn't go to the dome lights , the switch (door ajar switch ) is an input to the SMJ - smart junction box or body control module take your pick .
Principles of Operation
When the SJB detects a request for lighting, it turns on the interior lamps by supplying power to the lamps. The request for lighting can be an open door signal from a door ajar switch, an interior lighting on command from the instrument panel dimmer switch or an unlock command from a remote keyless entry (RKE) transmitter.
The door ajar switches are hard-wired directly to the SJB. The 2 door ajar switches are normally closed when the doors are closed. The decklid ajar switch is normally closed when the decklid is closed. All door ajar switches receive voltage from the SJB and each has its own ground circuit.
The instrument panel dimmer switch receives a ground signal from the SJB. The instrument panel dimmer switch provides variable resistance for backlighting the instrument cluster and a toggle ON/OFF function for the interior lights.
The RKE receiver is contained inside the SJB. When the SJB receives an unlock request from an RKE transmitter, it unlocks the doors and turns on the interior lamps. There could be DTC'S diagnostic trouble codes stored in the SJB ! You can not access these codes with a OBD2 code reader , need a factory scan tool .
B1319 Driver Door Ajar Circuit Failure Go To Pinpoint Test D . B1327 Passenger Door Ajar Circuit Failure Go To Pinpoint Test D . B2021 Dome Lamp Input Return Circuit Failure Go To Pinpoint Test A . B2550 Dome Lamp Output Circuit Short to Ground Go To Pinpoint Test A . B2554 Dome Lamp Output Circuit Failure Go To Pinpoint Test D . Do you know B-codes -body control .
Your best bet is to take to a ASE certified repair facility or a Ford dealer .

Jan 01, 2016 | 2005 Ford Mustang V6

1 Answer

My instrument panel keeps dinging and the passengers side door open alert keeps poping up and the doors keep locking and unlocking while I'm driving and the dome lights keep turning on and off,also in


Most likely problem is a loose or bad open switch on the passenger door. See if you can spot the switch and check to see if it's loose. Problem could also be that the door latch needs to be adjusted to close more tightly.

Jan 14, 2015 | Cars & Trucks

2 Answers

Chevy trailblazer problems


its either a bad door switch,or could be the dome override switch by headlight switch,or your interior light switch is all the way up

May 01, 2014 | 2004 Chevrolet TrailBlazer

1 Answer

Instrument panel quits working at night when you turn the lights on,but when you open the door they come back on, close the door they go off again sometimes they work with no problem I checked for shorts...


wires deteriorate after years of opening and closing most likely this is between the door and the jamb =car body also instrument lights switches wear out and go faulty

Aug 26, 2009 | 1996 Dodge Neon

1 Answer

2004 crown vic interior lights stay on


Don't think you have a door ajar switch problem , more then like the lighting control module is the culprit . Does the door ajar light on the instrument cluster stay lit ?
The interior lighting can be separated into two distinct modes of operation: the courtesy lighting and the demand lighting. The lighting control module (LCM) controls all of the interior lighting in the vehicle, as described in the following text.
The front dome lamps, rear reading lamps, and instrument panel courtesy lamps, can be illuminated either by opening any of the vehicle doors (courtesy lamp function) or by depressing the headlamp switch (demand lamp function).
When any door is open, the door ajar switch grounds an input to the LCM which then sends power to the courtesy lamps. The voltage sent to the courtesy lamps gradually increases from 0 volts to 12 volts within 500 ms (± 50 ms), to achieve the theater lighting effect. When the door(s) are closed the door ajar switch(es) break(s) the ground to the LCM input which then gradually reduces the power from 12 volts to 0 volts within 5 seconds. (± .5 second).
When the headlamp switch is depressed it grounds an input to the LCM which in turn sends 12 volts to the front dome lamps, rear reading lamps, and instrument panel courtesy lamps. When the headlamp switch is depressed a second time, it breaks the ground to the LCM input which then ceases to send power to the front dome lamps, rear reading lamps, and instrument panel courtesy lamps.

The battery saver will disrupt power to the courtesy lamps after 10 minutes, the demand lamps after 30 minutes, and the headlamps after 10 minutes. Turning the ignition switch to the RUN or ACC position will terminate the battery saver feature by disabling the interrupt timers and reinstate power to the lamps.
Do you know what DTC'S are ? diagnostic trouble codes !
LCM Diagnostic Trouble Code (DTC) Index DTC Description Source Action B1322 Driver Door Ajar Circuit Short to Ground LCM Go To Pinpoint Test F . B1442 Door Handle Switch Circuit Failure LCM Go To Pinpoint Test G . B1445 Door Handle Switch Circuit Short to Ground LCM Go To Pinpoint Test G . B1563 Door Ajar Circuit Failure LCM Go To Pinpoint Test C . B1566 Door Ajar Circuit Short to Ground LCM Go To Pinpoint Test H . B1685 Lamp Dome Input Circuit Failure LCM Go To Pinpoint Test I . B1687 Lamp Dome Input Circuit Short to Battery LCM Go To Pinpoint Test I . - All Other DTCs LCM REFER to Section 419-10 .

PINPOINT TEST C: THE COURTESY LAMPS STAY ON CONTINUOUSLY CONDITIONS DETAILS/RESULTS/ACTIONS C1 CHECK THE SYSTEM OPERATION Open and close each door, making sure that each door is completely closed.
  • Are the courtesy lamps still illuminated after the 25 second time-out period?
Yes GO to C2 .

No The system is operating correctly. C2 TEST DOME LAMP SWITCH Depress the dome lamp switch.
  • Are the courtesy lamps still illuminated?
Yes DEPRESS the dome lamp switch a second time. GO to C3 .

No The system is operating correctly. C3 CHECK THE LIGHTING CONTROL MODULE
LCM C2145a

  • Are the courtesy lamps still illuminated?
Yes REPAIR circuit 53 (BK/LB). REPEAT the self-test. CLEAR the DTCs.

No INSTALL a new LCM. REFER to Section 419-10 . REPEAT the self-test. CLEAR the DTCs.

Apr 16, 2017 | 2004 Ford Crown Victoria

1 Answer

Window returns to high position, preventing door closing properly


I have a 02 Carrera and had the problem of the window remaining too high and preventing closing. i took the car to the dealer and they did something with the door handle mechanism, like unscrewing it and putting it back in place, which fixed the problem, no charge i think. i also had a bad starter switch and light switch on the front panel. when these were changed, my car now starts well and all lights work in the instrument cluster, which was a problem before.

Jun 15, 2009 | 2000 Porsche 911 Carrera

2 Answers

Dome light and doors open light stay on when driving.


check you door switch buttons to see if they will each turn off the lights. Open one door at a time, push the door push button by hand and see if the lights go out. If they do, that is your probelm switch or the door is not closing tight enough to psuh the pluger button all the way in.

Apr 25, 2009 | 1999 Ford Taurus

Not finding what you are looking for?
1993 Honda Accord Logo

Related Topics:

42 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...