Question about 1999 Mercedes-Benz CLK

Open Question

1999 Mercedes CLK320 Transmission won't change gears! put in new conductor plate, no change still the same What now?

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 373 Answers

SOURCE: 1999 mercedes benz clk320

Hi....
Yes could be Bearing.
But if you have the ABS and BAS lights.
The first estep is : Raise the car with a jack and.
Rotate the tire to see if the bearing is good or not.
Check the condittion of the brakes,
With a bad bearing the ABS And BAS light can come ON.
Move the tire with your hand side by side to check the tie rod ends...

Ok.. I hope this help to try diagnostic your Vehicle.
Thank you for use fixya..

Posted on Aug 28, 2008

Ad
  • 217 Answers

SOURCE: dodge ram 2500 transmission makes noise that comes and goes.

sounds like inspection cover to trans hitting flexplate

Posted on Mar 20, 2009

michigan man
  • 3533 Answers

SOURCE: how change bulb transmission gear box ford esct 1999

try autozone.com to see if they have your car listed for diagrams pictures and step by step instructions if your car is not listed then try your local library they have all the car manuals and even copy them for you

Posted on Mar 20, 2009

  • 12744 Answers

SOURCE: I no longer have the manual for my 1999 mercedes

need to notify me/be dealer for code call first they will ask you for radio number they can tell u where on radio it is or how to retrieve it from radio and vin number than they usually tell u to come in with id

Posted on Jan 21, 2010

michael4wgv
  • 166 Answers

SOURCE: how to change a serpentine belt clk320 2003

just put a socket and rachet on the bolt for the tensioner pulley and move the tensioner to the right to loosen the slack on the belt.

Posted on Oct 01, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Got a code po705, replaced the conductor plate and plug with new ones.


This code is for a Transmission range sensor. Which can cause a vehicle to shift properly or go into gear correctly. Here are the problems that could cause that to malfunction.
  • Defective Transmission Range Sensor (PRNDL input)
  • Defective Transmission Range Sensor (PRNDL input) wiring or connector
  • Defective Valve Body
  • Defective manual shift valve linkage
  • Dirty transmission fluid that restricts the hydraulic passages

Dec 27, 2015 | 2003 Mercedes-Benz E-Class

1 Answer

I have a 2004 Mercedes Benz CLK320 don't know why


Try using the second key if you have one. Does the key not working look like it is bent? The ignition cylinder may just be worn to the point that it needs to be replaced.

May 15, 2012 | 2004 Mercedes-Benz CLK-Class

1 Answer

Problem with the 1999 Mercedes-Benz CLK Clk320 asr/bas light on


try cleaning the contacts under the front seats ,where you will find a multi connector thats yellow ,cannot say it will cure it but ??' If you are in europe then if it goes to a garage they are ordered by the EEC to change all airbags on a vehicle over ten yrs old ,new directive

Sep 22, 2011 | 1999 Mercedes-Benz CLK

1 Answer

Toyota Vista SV50 model / year 1999: I have used Dextron type 2 automatic fluid in the auto transmission. Could this be the problem for auto gears sticking in same gear too long when car is started in...


Hi, since you use a dextron type 2 automatic fluid then it is not cause of the sticking gear. Rather it should be as a result of a clogged transmission filter. A clogged transmission filtercan cause problems with changing gears because it will not allow the fluid to pass through the valve body or valve solenoids at the proper pressure. Without pressure, the plates won't move properly and you won't be able to easily change gears. This can be symptomatic either by itself or along with burnt or worn out transmission fluid, and both should generally be replaced at the same time, rather than just replacing one or the other.

Jul 22, 2011 | Toyota Camry Cars & Trucks

1 Answer

Shifting funny , sometimes acts like it does not down shift after slowing down , has gone into the safe mode several times , could this be the the ETC?


do u have a check engine light on? does it shift hard when you put it in drive. does it go in the limp mode ? it is usually the conductor plate in the transmission. it is called the electrics kit by mercedes. it is in the valvebody of the transmission. not hard to replace.

Sep 07, 2010 | 2000 Mercedes-Benz CLK

Not finding what you are looking for?
1999 Mercedes-Benz CLK Logo

Related Topics:

228 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

yadayada
yadayada

Level 3 Expert

77202 Answers

Joseph Prosser

Level 3 Expert

771 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...