Question about Ford E-250

1 Answer

Cobra777 is whom I'm looking for. He answered a question for me yesterday and I need more info. He is not showing up under my profile as having answered my question. Thanks Steve Martin

Posted by on

  • bmcsret Jun 06, 2010

    Thank you


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert who has written 7 tips or uploaded 3 video tips

  • Ford Master
  • 1,051 Answers

If you requested additional information, but failed to get a response you can refuse the answer and not be charged the $4. Keep in mind that many members might be on vacation.

Posted on Jun 06, 2010

  • bmcsret Jun 06, 2010

    Yesterday cobra777 sent me a copy of the fuse box diagram for a 1996 Ford E 250 van but the print was so small I couldn't read it. When I went back to ask him for a better print, his info was gone and replaced by varan_engr and he suggested going to but when I go there and click on for fuse boxes all I get is a bunch of advertisements.

    Can you help? Can you email me a good diagram of the fuse box's for this van?

    Thank you

    Steve Martin

  • Bob Korsu
    Bob Korsu Jun 12, 2010

    Sorry for the delay. Try here www.FLMowner/


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Where is the fuel pressure regulator on 1996 Plymouth grand voyager

I looked at info for the 3.3L ohv engine.
My info shows it is located at the fuel pump assembly in the gas tank.

Have you looked for external leaks, under the vehicle, under the hood? You may be able to use fuel pressure gage, cycle the key to bring up fuel pressure, turn key off, see if pressure holds for a bit? Also, check evap system.

Feb 27, 2017 | Plymouth Cars & Trucks

1 Answer

Car lost power and died.

will the engine turn over now just not crank, or when you turn the key nothing happens? need more info to help you get the right answer

Sep 28, 2015 | Cars & Trucks

3 Answers

Fuse boxes, how many are they

there are two one under the hood on the drivers side close to the battery and the acessory fuse panel inside the vehicle

Jun 25, 2014 | 1998 Honda CR-V

1 Answer

I ran the air conditioner yesterday and everything was fine, when i got in this morning, it was cool so i turned into vent and moved the thermostat to red. This afternoon it was warm so moved it back to...

I'd probably check the blend door under the dash for proper operation. Sorry, I don't have any pictures. Also, if the blend door is vacuum operated, check the vacuum. I did check hvac wiring diagram, didn't show any actuators, so, I believe vacuum operated. I'd have to look at it, to diagnose further, sorry I don't have better info.

Make sure it is full of refrigerant and compressor clutch in engaging.

Jun 26, 2017 | 1997 Buick Skylark

1 Answer

Why do i get info on a honda when i ask about a dodge

Because the window we see shows you have..."A Problem with a 1998 Honda Odyssey". Think you need to update your profile? Not sure.

Mar 03, 2014 | 1998 Honda Odyssey

1 Answer

Remove th fuel pump

just copy and paste this in youir browser and follow the information till you see the info you need this is the factory service manual for your car it will show you everything down to the last nut hope this helps. Be sure to rate the answer so other people can find the info.

Mar 24, 2009 | 2006 Mitsubishi Eclipse

1 Answer

Bogs and backfires--1988 Nissan Urvan E24-H w/Z24 eng.

The dwell angle should be 50 degrees (49-55) Your problem sounds like either the ignition system breaking down under load or a carburettor progression fault, i.e. the idle circuit is working fine but the main jets are blocked. This can sometimes be cleared by revving the engine with the air filter off & then covering the carb inlet with a piece of rag while keeping the throttle wide open, taking care not to let the rag get sucked in! The idea is to use the vacuum of the engine to **** fuel through the jets & hopefully clear them. Do this a couple of times without letting the engine cut out. Remove the rag just before the engine dies, pick up the revs & try again. Sorry I couldn't answer yesterday but there seemed to be a fault with the website.
Good luck & keep in touch.

Jul 07, 2008 | 1987 Nissan Pickup

1 Answer

My breaklights not working

f the lights only actuate normally when you press the brake pedal, then you may have a bad brake switch or need to readjust it (under the brake pedal you'll see it actuate when you press the pedal by hand). Look up the switch on for your year make model and get fix it info.

Jun 22, 2008 | 1995 Subaru Legacy

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

23 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers


Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides