Question about 2001 Ford Focus

1 Answer

How to Remove Radio - 2001 Ford Focus

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 4,834 Answers

Normal 0 false false false MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-ansi-language:#0400; mso-fareast-language:#0400; mso-bidi-language:#0400;} Here is a video showing how to remove a standard radio from the dashboard.
A pair of extractors are required (available from Ebay etc ) but these can be made from 2 pieces of bent, wire
coat-hanger or 4 small drills(using the blunt end) or 4 small Allen Keys
or 4 small screwdrivers or 4 nails or even 4 darts.

An assistant is useful to pull the radio out whilst you are releasing the 4
securing clips

http://www.youtube.com/watch?v=urC-4NbXvDQ

note: on some radios , these 4 holes are protected by 4 small screws. These
can be unscrewed using the appropriate size of Allen key.

Posted on Jun 10, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2002 mercury mountaineer, V6 4.0 2WD. Where is the GEM located?


Module - Generic Electronic (GEM)/Central Timer (CTM) Removal
  1. CAUTION: Electronic modules are sensitive to static electrical charges. If exposed to these charges, damage may result. Depower the supplemental restraint system (SRS). For additional information, refer to Section 501-20B .
  1. Remove the audio unit. For additional information, refer to Section 415-01 .
  1. Remove the center instrument panel finish panel.
    1. Remove the screws.
    1. Remove the center instrument panel finish panel.
    • Disconnect the electrical connectors.
    • Remove the GEM/CTM.
      1. Remove the screw.
    1. Disconnect the four connectors from the GEM/CTM.
    1. Remove the GEM/CTM.
    2. Installation
      1. NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive strategy. The vehicle may need to be driven 16 km (10 mi) or more to relearn the strategy.
Special Tool(s) Radio Removing Tool
415-001 (T87P-19061-A) Removal
  1. Remove the radio chassis.
    1. Insert Radio Removing Tool into the radio face plate and release the radio retaining clips.
    1. Pull outward on Radio Removing Tool to remove the radio chassis from the instrument panel.
    2. Remove the radio.
      1. Disconnect the electrical connectors.
      1. Disconnect the radio antenna lead in cable.
      1. Remove the radio.

May 26, 2017 | Mercury Cars & Trucks

1 Answer

How do i remove the stock radio from my 1993 geo metro 4 door hatchback


here is the online fsm quote

  1. Disconnect the negative battery cable.
  2. Open the glove box. Remove the glove box open panel.
  3. Remove the air conditioning switch connector and heater control unit lever knobs. Pull heater control unit cover plate from instrument panel.
  4. Remove the gearshift control lever upper boot and center console.
  5. Remove the ashtray.
  6. Remove the instrument panel center trim bezel and radio face plate.
  7. Remove the screw from the back of the radio receiver and the screws from the front face of the radio.
  8. Remove the radio.

Sep 30, 2014 | 1993 Geo Metro

1 Answer

Remove radio


Remove any media that may be in the radio.
Put your car in park, set the parking brake and remove the negative battery cable (the black cable) from your battery's terminal by loosening the bolt on the clamp, with an adjustable wrench.
Remove three Phillips screws spaced across the bottom of the radio's trim panel. This is a large panel on the dashboard that surrounds the radio and the instrument cluster. OBD365
Remove three Phillips screws from the top edge of the the trim panel.
Pull the trim panel off by pulling firmly towards you, starting in the center. This will release the clips holding the panel in place.
Remove two 3/8-inch bolts holding the radio in place.
Pull the radio away from the dash and unbolt the metal strap attached to the back. It's held in place by a 3/8-inch bolt.
Unplug the wiring plugs attached to the back of the radio by pulling them firmly away from the back of the radio chassis. Remove the radio from the car.
Foxwell NT630 AutoMaster Pro ABS Airbag Reset Tool

Sep 19, 2014 | 1997 Ford Explorer AWD

1 Answer

How do you remove the stereo from a Toyota Echo?


NOTE: The following procedure may vary a bit from the system which you have in your car.
TO REMOVE RADIO RECEIVER ASSEMBLY
(a) for Integrated with Panel:
(1) Disconnect the hazard warning signal switch
connector.
(2) Remove the 4 bolts.
(3) Disengage the 4 clips and the 4 claws and
remove the radio receiver.
(4) Disconnect the plug.
(5) Disconnect the 3 radio connectors.
(b) except Integrated with Panel:
(1) Remove the 4 bolts and the radio receiver.
(2) Disconnect the plug.
(3) Disconnect the 2 radio connectors.
1. REMOVE INSTRUMENT PANEL CENTER REGISTER
ASSEMBLY (for Integrated with Panel)
2. REMOVE RADIO BRACKET RH
(a) for Integrated with Panel:
(1) Remove the 4 screws and the radio bracket.
(b) except Integrated with Panel:
(1) Remove the 4 screws and the radio bracket.
3. REMOVE RADIO BRACKET LH
HINT:
Use the same procedure as for the RH side.

Feb 14, 2014 | 2001 Toyota Echo

1 Answer

Factory stereo not working and needs replaced. how does dash come apart to do this


REMOVAL

  1. Disconnect and isolate the battery negative cable.
  2. Remove cup holder.
  3. Remove trim panel above cupholder by pulling straight out.
  4. Remove center instrument panel trim panel.
  5. Remove screws holding radio to instrument panel.
  6. Pull radio rearward to gain access to the back of radio (RADIO). CAUTION: Pulling the antenna cable straight out of the radio without pulling on the locking antenna connector could damage the cable or radio.
  7. Disconnect the antenna cable by pulling the locking antenna connector away from the radio (ANTENNA TO RADIO).
  8. Disconnect bolt holding ground strap to the radio (if equipped).
  9. Disconnect the wire connectors from the back of the radio.

Nov 19, 2013 | 2002 Dodge Grand Caravan

1 Answer

Removal of radio


Radio Reciever/Amplifier/Tape Player/CD Player REMOVAL & INSTALLATION Fig. 1: Remove the bezel retaining fasteners and the bezel . . . 86746p02.jpg
  1. Disconnect the negative battery cable.
  2. Remove the center cluster screws and bezel.
  3. Remove the radio attaching screws.
  4. Disconnect the radio from the instrument panel wiring harness and antenna.
  5. Installation is the reverse of removal. Fig. 2: . . . then remove the radio retaining fasteners 86746p12.jpg
    Fig. 3: Slide the radio forward so that you may gain access to the electrical connections 86746p13.jpg
    Fig. 4: Disengage the antenna and radio electrical connections 86746p14.jpg
prev.gif next.gif

Oct 17, 2010 | 1993 Jeep Grand Cherokee

1 Answer

REMOVAL OF THE RADIO


Here ya go!

4c47b30.gif
Exploded view of the radio, tape player or CD player removal, 1990-94 vehicles

  1. Disconnect the negative battery cable. Wait at least 60 seconds before beginning the remainder of the procedure, in order to disarm the Supplemental Restraint System (SRS).
  2. Using a plastic trim tool, remove the radio panel. Pry the lower part of the radio panel away first, then separate and remove the panel.
9d61d07.gif
Using a plastic trim tool, carefully pry the radio trim panel away

08e17de.gif
Remove the center trim panel for access to the radio retainers

WARNING When removing and installing the floor console, do NOT allow it to bump against the SRS-ECU!

  1. For 1995-98 vehicles, remove the floor console assembly, as outlined in Section 10 of this manual.
  1. Remove the mounting bolts and pull the radio receiver, tape player or CD player out slightly. Detach all harness connectors and remove the unit from the vehicle.
4c48f2d.gif
After removing the console, unfasten the radio mounting screws

e7143a0.gif
Pull the radio out enough to access the connectors

4cb0996.gif
Unplug the electrical connector from the rear of the radio ...

3795675.gif
... then disconnect the antenna lead and remove the radio from the vehicle


Installation is the reverse of the removal procedure.

Oct 29, 2009 | 1992 Eagle Talon

1 Answer

I need to remove the radio in my 1998 mountaineer


you need specail radio removal tools. they spread 4 spring clips.

  1. Remove the radio chassis.
  2. Insert Radio Removing Tool into the radio face plate and release the radio retaining clips.
  3. Pull outward on Radio Removing Tool to remove the radio chassis from the instrument panel.
Special Tool(s)

Radio Removing Tool
415-001 (T87P-19061-A)

19701bc.gif

May 12, 2009 | 1998 Mercury Mountaineer

1 Answer

Radio and dash lights


Remove radio from vehicle. remove T15 torx screws on top and sides of radio. Remove knobs and outer bezels around knobs. Face has retainer clips top and bottom. Unsnap the face of radio and remove old bulbs there are five or six in a gm radio.

Jan 12, 2009 | 2001 Chevrolet Blazer

1 Answer

How do I remove radio from 2005 altima


HELLO FIRST POP THE COVER OFF AROUND THE SHIFTER NOW YOU WILL SEE PART OF THE COVER THE GOES UP AROUND THE RADIO IT IS ONE PIECE THERE IS TWO SCEWS YOU WILL HAVE TO REMOVE DOWN THE SHIFTER BEFORE YOU REMOVE THE RADIO FACE COVER YOU WILL HAVE TO REMOVE THE STEERRING COLUM COVER NOW YOU CAN TAKE OFF THE RADIO FACE COVER IT JUST POPS OFF THERE IS TWO SCREWS ON EACH SIDE OF THE RADIO REMOVE THEM AND RADIOS OUT DONT FORGET TO UNPLUG RADIO PLUGS AND ATT

Aug 07, 2008 | Nissan Altima Cars & Trucks

Not finding what you are looking for?
2001 Ford Focus Logo

Related Topics:

102 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5470 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...