Question about 2006 Chevrolet Equinox
Where is the turbine speed sensor that causes po717 code in a 2005 Equinox?
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Speed Sensor
The Speed sensor on your Honda Accord 97.
Is located on the Transmission.
If you follow the Lower Radiator hose from the rad to the engine.
The hose end on the Thermostat housing.
OK.. Just on direction of the thermostat housing .
Under the housing you Will see on the transmission the Speed sensor, with a connector of 3 wires. Is the only sensor at this
Part of the Transmission..
Ok. I hope this work on your question.
Thank you for use fixya..
Posted on Sep 09, 2008
SOURCE: 2005 equinox with P0405 code.
Do you have an odd smell in the interior compartment? This could be due to the egr being damaged from debris from the road. Hire a professional to do it or go to a car parts store and get the motors repair manual or similar.
Posted on Mar 12, 2009
The turbine shaft speed sensor can cause this problem, It is also know as the transmission input shaft speed sensor. It will cause the transmission to **** and also stick in 3rd gear, which wound cause slow acceleration.
Posted on May 18, 2009
Have the same problem with the input speed sensor. The part, so far, is only made by Mitsubishi (Part No. 8651A111) and cost about $110 (w/ tax in TX).
Posted on Oct 07, 2009
its on the front of the transmission below the coil it compares the input shaft/turbine speed against the speed of the output sensor it is checking to see how much slip or diffrenece in shaft speeds the only time the two shafts are spinning at the same time is when torque converter is in lockup
get this sensor from ford dealer for a little more than $100 bucks
Part number F32Z7F040A
Posted on Apr 08, 2010
Tips for a great answer:
May 08, 2016 | 2008 Chrysler 300 Touring
Sep 01, 2013 | 1998 Chevrolet Cavalier
Aug 23, 2013 | Kia Cars & Trucks
The computer wants to know if the transmission is working properly. So it reads the speed of the input shaft and compares it to the speed of the output shaft. It knows which gear you're in because it commanded the transmission to shift into that gear. So, with the input speed, the gear selection, and the output speed, the computer can calculate how efficiently the transmission is working. If the speed is off, it knows that something is slipping inside the transmission. It can then try to boost the fluid pressure to compensate. If that doesn't work, it sets a different trouble code.
The P0717 code means that the computer isn't getting any signal from the sensor. Either the sensor is dead or there's a circuit issue (bad wiring, etc).
Sep 22, 2011 | 1999 Pontiac Grand Prix
Aug 06, 2011 | 2005 Nissan Altima
Mar 14, 2011 | 1995 Oldsmobile Aurora
Jan 14, 2011 | 2005 Scion tC
Nov 08, 2010 | Pontiac Sunfire Cars & Trucks
Feb 24, 2017 | 2006 Chevrolet Equinox
462 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: