Question about 2006 Dodge Ram 1500

1 Answer

I have an 06 dodge ram 1500 that stopped shifting at temp(manual)

I have a 2006 dodge ram 1500 that stopped shifting one day on the interstate. the clutch disc had tore apart on the flywheel side. replaced the clutch plate, pressure plate, had the flywheel machined, replaced the pilot bearing and the throwout bearing and it still would not shift once the truck reached operating temperature. replaced the entire hydraulic clutch release system and yet again once the truck reached operating temperature it will not shift. when the truck is cold it works flawlessly and drives great but the closer it gets to operating temp the worse it becomes until it will not shift period unless you turn the truck off, get it in gear and turn it back on. the tachometer also isn't working properly and going about 60 - 65 it starting developing a vibration that gradually got worse until i slowed down to almost a stop and drove backroads the rest of the way home with very slight vibration. i have no clue anymore wtf is going on and i was hoping for a possible suggestion before i go blowin money at the stealership. any ideas?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 834 Answers

The only time that I have ever seen anything happen like that was due to improper gear oil. You can try and drain the transmission and re-fill it with the proper gear oil, and usually you will want to use 80-90wt. GL-5, but you should make certain that you do use the right gear oil, especially if the transmission has newly processed gears.

Posted on Jun 07, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Will not go in to four wheel drive


Dodge Ram 1500 Questions - 4WD not engaging all the ...

www.cargurus.com > Questions > Dodge > Ram 1500

CarGurusOct 18, 2013 - to get it into 4LOW is to 1st get it into HI and then stop and shift it intoLOW. ... I have a 98 Dodge Ram 1500 that I can not get the 4 wheel drive to ... what web site can i go to so i can see how the inside looks on timing gears.

Diagnosing 4WD Engagement Problems on Dodge Ram ...

dodgeram.org > Main > Tech > Maintenance
Nov 1, 2000 - This shift will be easier if you momentarily release the accelerator pedal. Apply a ... Do not attempt to shift to or from 4L while transmission is in gear or clutch is engaged. ... OK, now when you shift into 4WD it gets a little more complicated. .... I have a 97 RAM 1500 Club Cab Sport 4 X4 and I am having

2008 Dodge Ram 1500 Won't Engage 4 Wheel Drive: 20 ...

www.carcomplaints.com/Dodge/Ram_1500/.../drivetrain/wont_engage_4...
Ram 1500 Won't Shift Out Of 4 Wheel Low - Ram got locked into 4 wheel low. Found this ..... It would not go into full time 4 wheel drive or go into 2 wheel drive.

Software Update and Axle Disconnect Actuator ... - RepairPal

repairpal.com > Problems > Dodge > Ram 1500

Feb 08, 2016 | 2004 Dodge Ram 1500

1 Answer

06 Dodge Ram 1500 4x4 transfer casing cracked around output to rear driveshaft. This has happened twice within 1000 miles


you either have
a broken trans mount
a rear axle twisting
incorrect pinion angle
damaged drive shaft

Oct 27, 2014 | 2006 Dodge Ram 1500

1 Answer

I have a 2005 Dodge Ram 1500 Quad Cab 2wd w/4.7L Engine. My transmission experiences two problems. Problem 1 is that sometimes (not always) when letting off the gas at a slow cruising speed the...


Try some tranX. My transmission would drop out from 2nd and 3rd , I put this in and with in 3 days it quit slipping. and shifted normally. It's been over 2 years now without a problem

Nov 27, 2010 | 2005 Dodge Ram 1500

2 Answers

1997 Dodge Ram 4x4 1500 transmission shifting problems.


good day, you may try replacing your automatic transmission fluid, a good run will be noticeable, hope this helps, have a nice day

Feb 08, 2010 | Dodge Ram 1500 Cars & Trucks

2 Answers

1999 Dodge Ram van 1500 no pick up power


I had a similiar problem on my 1999 Dodge Ram 1500 Conversion Van. It ended up being a partial collapse of the catalytic converter which didn't allow adequate exhaust. The problem only showed itself because I could not get over 55 mph going up a small hill.

Jul 05, 2009 | 2000 Dodge Ram 1500 Truck

1 Answer

2004 4x4 ram cummins wobble upon take off and in


my 06 2500 cummins shook like a log wagon until i change the u-joints. 35 dollars and a couple of hours. 

Jun 08, 2009 | 2006 Dodge Ram 1500

1 Answer

Blower for air


i bet the blower motor is jamed up and might need to replaced

Dec 11, 2008 | 2006 Dodge Ram 1500

1 Answer

My hazard lights and turn signals stopped flashing


i bet you have a bad multi function switch or turn sig switch. good luck

Oct 25, 2008 | 2006 Dodge Ram 1500

Not finding what you are looking for?
Cars & Trucks Logo

201 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...