Question about Hyundai Motor 2004 Accent

1 Answer

How do i remove the rear brake drums on a 1999 accent

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,418 Answers

Take off any hub caps and loosen the lug nuts (just loosen them) with the tire still on the ground it is way easier this way. Jack up the rear and set the car on stands as secure as you can, please be safe. Place chocks under the front wheels to keep it from moving off the stands. Finish removing the lug nuts and remove the rear wheels. Look on the outer edge of your brake drum for a punch slot, it is an oval looking indention in the drum that you punch out to access the rear brake adjusters. If you do not see this punch slot look on the rear back plate for a rubber cap that you can pry out with a screw driver. Inside will be the brake shoes adjusters, you have to back off the adjusters to get the drum off the axel. Once you have backed off the adjusters, you can use a hammer and hitting the drum on the front edge it should come loose now to access the brake shoes. Next work on one side at the time using the other side as your guide remove & replace the shoes . Put it back together.

Posted on Jun 06, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have an 2006 Hyundai Accent Atlantic and I would like to know if front brakes have pads and rear brakes have shoes


2006 Accent Brakes, Suspension & Handling Specs • Four-wheel ABS • Four disc brakes including two ventilated discs • Electronic brake distribution • Spacesaver steel rim internal spare wheel • Strut front suspension independent with stabilizer bar and coil springs , torsion beam rear suspension semi-independent with stabilizer bar and coil springs

Read more: http://www.automotive.com/2006/12/hyundai/accent/specifications/handling-ride-braking.html#ixzz1JcYuzhff

Apr 15, 2011 | 2006 Hyundai Accent

2 Answers

How to replace the rear break drums on a hyumdai accent gs


Brake Drums-They seem to be fastened with a nut and have bearings that need to be regreased based on the diagram found for replacing the shoes. Removal & Installation To Remove:
  1. Remove or disconnect the following:
    • Wheel 02-04_hyundai_accent_brake_drum.gif

    • Brake drum
To Install:
  1. Install or connect the following: 02-04_hyundai_accent_brake_drum.gif

    • Brake drum
    • Wheel
--- Removal & Installation To Remove:
  1. Remove or disconnect the following:
    • Wheel 02-04_hyundai_accent_brake_drum.gif

    • Brake drum 02-04_hyundai_accent_rear_brake_backing_plate.gif

    • Shoe hold-down spring
    • Automatic adjuster spring
    • Adjuster lever
    • Shoe adjuster by spreading the shoes
    • Shoe to shoe spring
To Install:
Note: Apply the specified grease to the shoe to backing plate and shoe to anchor plate contact surfaces.
  1. Install or connect the following: 02-04_hyundai_accent_rear_brake_backing_plate.gif

    • Shoe hold down pin
    • Return spring to the push rod while it is shortened
    • Shoe hold down spring
    • Shoe to shoe spring
    • Shoe adjuster by spreading the shoes
    • Adjuster lever
    • Automatic adjuster spring 02-04_hyundai_accent_brake_drum.gif

    • Brake drum
    • Wheel
Note: After assembling the drum components, pull the parking brake lever all the way up several times
prev.gif next.gifprev.gif next.gif

Sep 30, 2010 | 2001 Hyundai Accent

1 Answer

Squeeks from rear brakes when cornering, when i press the brake pedal it stops


Your rear brakes need adjustment, you must remove the wheels, drums. Clean and lubricate the contact points and adjust the adjuster to specs.

Jul 17, 2010 | 2002 Hyundai Accent

1 Answer

How do i remove the brake drum of a 1997 hyunidai excel do i need to remove the centre nut that also takes out the wheel bearing


With Rear Hub Bearing
  1. Raise the vehicle and support safely.
  2. Remove the wheels.
  3. Remove the dust cap, cotter pin and loosen the locknut
  4. Remove the washer and outer wheel bearing.
If the drum is difficult to remove, remove the plug from the rear of the backing plate and push the self adjuster lever away from the star wheel. Rotate the star wheel to retract the shoes.
  1. Remove the drum with the inner wheel bearing from the spindle.
To install:
  1. Install the drum on the spindle.
  2. Install the outer wheel bearing and washer.
  3. Tighten the locknut to 108-145 ft. lbs. (150-200 Nm). Turn the brake drum while tightening the spindle nut to seat the wheel bearings.
  4. Install the cotter pin and dust cap.
  5. Install the wheels
  6. Adjust the rear brakes.

Apr 23, 2010 | 1997 Hyundai Accent

1 Answer

Rear drum won't adjust


hi from uk i have given same advice/remedy re your problem on rear auto adjust on accent if yo click onto the following it will help you to check problem and manually adjust rear brakes ? http//www.FIXYA.com/cars/t232239-rearbrake2002hyundai accent

Jun 17, 2009 | 2000 Hyundai Accent

1 Answer

Rear brake on 2002 hyundia accent


hi from uk after supporting car on stand or blocks ? remove wheel then you will see x head screwsx2 remove screws then release handbrake drum should now rotate freely you may need to lightly but firmly tap the drum off the hub if you have an old vac ? use it to vac the dust from shoes and drum ? if your shoes are ok ? then make sure the auto adjuster is free and clean? if your h/brake travel is high and the reason for checking brakes? then notch up auto adjuster a couple of clicks at atime whilst keep trying the drum fits so the shoes are just enabling rotation of drum by hand then press b/pedal a cople of times to centralise shoes to drum ? if drum still rotates freely with no binding on shoes ? then re assemble carry out same proceedure on other side ? do not adjust brake cable! unless you do adjustment as above you may/will find your h/brake is better /less travel ? also your foot brake will feel better and less travel ? hope this helps you but if you req further info/assistance by all means come back to board best wishes from lancashire uk

Jun 04, 2009 | 2002 Hyundai Accent

1 Answer

Knocking when brakes applied


REAR BRAKE NOISE - SHOE AND LINING KIT
A shoe and lining kit is available for installation if an Elantra (XD) or Accent (LC)
equipped with rear drum brakes exhibits a chattering noise from the rear brakes when
the brakes are applied.

APPLICABLE VEHICLES:
• Accent (LC) and Elantra (XD) equipped with rear drum brakes and in the following
Production Date and VIN Range:
SERVICE PROCEDURE:
For further information, refer to the applicable Shop Manual.
Model Production Date Range VIN Range
ACCENT (LC) May 21,1999 - Dec. 28, 2005 ALL WITH DRUM
BRAKES.
ELANTRA(XD) June 30, 2000 - May 23, 2006 JOB#1-
KMHDN46016V363974

ACCENT SHOE & LINING
KIT
ASSEMBLY
58305-25A00 58305-25F00 7"(00MY - 05MY)
58305-25A10 58305-25F10 8"(00MY - 05MY)

May 03, 2009 | 2003 Hyundai Accent

1 Answer

2001 Hyundai Accent new rear brake noise


jack up the rear wheel and spin it, do this with the other wheels chocked for safety, and listen for any rubbing sound, do this with both rear wheels and if one is bad then remove the drum again to check if the retainer has come off of the brake lining, hope this helps you.

Jan 07, 2009 | 2001 Hyundai Accent

1 Answer

How to remove the back breaks of a 1999 hyundai elantra


This isn't uncommon; some parking brake setups may cause the shoes to drag on the drum while trying to remove it. If your parking brake has been ineffective in recent times, the cable may be rusted in place. Try putting the hand brake on HARD (**** on it), then releasing it several times to break the friction that may be present. If this doesn't work, try doing the same thing at each wheel.
If this still doesn't free the drum, use a hard plastic or brass hammer to tap firmly on the outside of the drum, rotating it as you go.  

Jan 04, 2009 | 1999 Hyundai Accent

3 Answers

Remove rear brake drums


0f2c8a8.gif
1. After removing the wheel, remove the brake drum. 2. Remove the shoe hold down spring, the automatic adjuster spring and adjuster lever.
7b7d17f.gif
3. Spread the shoes and remove the shoe adjuster. 4. Remove the shoe to shoe spring and shoe hold down spring.
a1a62c3.gif

Jun 03, 2008 | 1999 Hyundai Accent

Not finding what you are looking for?
Hyundai Motor 2004 Accent Logo

184 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...