Question about 1996 Plymouth Grand Voyager

1 Answer

Altenator belt popped off is not broken 3.0 grand plymoth voger

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 4 Answers

This is a common problem with dodge, crysler, and plymounth modles with 6 cylinder engines the alignment is slightly off of the pulleys
dodge had this in their service bulletins years ago and but didn't bother to tell anyone about it. you'll need either a replacement idler pulley wich should come with a washer that fixes the alignment or you'll need to purchace a belt kit that replaces the tentioner pully idler pully and has a new double sided ribbed belt.
amazon sells it for about $100. US
http://www.amazon.com/Gates-38379K-Serpentine-Drive-Component/dp/B000NBKI7Q
or try any auto parts store or garage for the kit Gates 38379K Serpentine Belt Drive Component Kit

Posted on Jun 11, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 93 plymoth grand voyager se blinkers aren't


Possible faulty hazard light switch. The blinker circuit on many cars runs through the hazard light switch.

Nov 03, 2012 | Cars & Trucks

1 Answer

I replaced the serpentine belt system on my 2000 dodge grand caravan with a gates solution kit. when i started the van the batrtery light came on and the battery drained very quickly. I replaced the...


have you checked relay and fuses? also wiring? and after you put the belt on did you watch and make sue the altenator is spinning? what it sounds like to me is you put the belt on wrong. also did the light come on after the belt change or be for???

Sep 29, 2012 | 2000 Dodge Grand Caravan

1 Answer

How to replace altenator?


  • remove the positive wire from the battery
  • disconnect the wires from the back of the altenator
  • remove the drive belt for the altenator, this may be a single belt that connects water pump and air conditioning compressor to the main crankshaft pulley or a seperate belt.
  • remove the alterator and replace with new unit
  • reinstall drive belt and wiring

Aug 10, 2010 | 1998 Pontiac Grand Prix

1 Answer

How to change altenator rib belt


there should be an idler pulley that also adjust the tension the tool usually used is a 3\8 or 1\2 ratchet

Jun 05, 2010 | 2000 Lexus ES 300

3 Answers

Battery light stays on. what could be the problem


Altenator is bust or the belt to the altenator is broken.

Jan 06, 2010 | 2008 Chevrolet Tahoe

1 Answer

My belt is worned out i need step by step on how to change it.


GET LOND DRIVE 3/8 RACHET OR BELT TOOL AND PLACE ON THE BELT TENSIONER AND PUSH THE TENSIONER YOU WILL SEE BELT IS LOOSEN REMOVE THE BELT FROM THE ALTENATOR PULLEY AND LET THE TENSIONER GO SLOWY AND REMOVE THE COMPLETE BELT. COMPARE THE OLD BELT FOR SIZE AND MAKE SURE THEY ARE EXACT MATCH. YOU HAVE BELT SCHEMATIC TOP OF THE WATER PUMP START FROM THE BOTTOM CRANK PULLEY PLACE THE BELT AND MAKE SURE DONT MISS TEETH OUT OR INSIDE. A/C PULLEY WATER PUMP POWER STEERING IDLE PULLEY AND OTHER SIDE PLACE ON TENSIONER PULLEY TO AND PUSH THE TENSIONER AGAIN AND PLACE THE ALTENATOR PULLEY AND YOU ARE DONE. BEFORE START TO ENGINE FALLOW THE COMPLETE BELT FOR PERFECT SIT AND CORRECT POSITION.SHOULDNT BE TOO TIGHT OR TOO LOOSE.

Dec 16, 2009 | 2000 Pontiac Grand Am GT

1 Answer

I was driving down the road, car started acting like it wasnt getting any power so i pulled into a parking lot, put car in park, it idled rough for about a minute, then the battery light popped on and car...


sounds like your altenator is bad. it will bring down your battery. your serpintine belt could also be bad and slipping. my bet is the altenator went bad and your batteru is now bad also. replace both and you should be good to go

Nov 29, 2009 | 2003 Pontiac Grand Am

Not finding what you are looking for?
1996 Plymouth Grand Voyager Logo

206 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8522 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...