Question about 2001 Hyundai Elantra

1 Answer

Clutch was slipping real bad, changed gears just fine. Took it to a garage, installed new clutch kit, Drove it home still slipping, so I replaced slave cylinder, great for about a week started slipping again, checked fluid level, just fine. still slipping??????

Posted by on

  • A Miller Jun 06, 2010

    take it back to the garage and have them complete the repair ...

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,600 Answers

Check the clutch linkage and make sure it'd not binding and di you replace the pressure plate? if not then it will need to be replace to stop the slipping if the linkage is not sticking or jamming. If the pressure plate springs are broke it would cause it to slip, also if the master cylinder is not releasing this could cause it to slip.

Posted on Jun 06, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When I let clutch out when cars in gear the car wont pull away if I turn engine off let it sit fr an hr then drive it its fine fr a while.


For awhile? How long? And then it slips again? I think you need a new clutch, your clutch disc must be worn. A new clutch kit includes a new clutch disc or plate, a new or rebuilt clutch pressure plate, and a new release bearing. Costs about $150-200,for the kit, but you also need the flywheel surface smoothed at a machine shop or garage, then the labor cost of removing the transmission or transaxle to replace the clutch- it all adds up to an expensive job.

Apr 09, 2015 | Cars & Trucks

2 Answers

Freelander clutch


check out the operation of the clutch system .IT is difficult to rationalise a hydraulic clutch because if it is slipping that means that the pressure plate is being held off and not fully engaging but it also means that when pressing on the clutch the there would be no problem changing gears . But if you have a cable clutch operation then it is possible that the cable is jamming inside the outer cover and holding the pressure plate off ( slipping) and gear problems. If it is cable then replace the cable first. If hydraulic then it may mean box out for a new clutch kit.

Jan 12, 2014 | Cars & Trucks

1 Answer

Had new clutch kit fitted and mechined fly wheel new slave cylender and it is still slipping hyundai excel 1997


The clutch m/cyl has a compensating port that blocks up and doesn't fully release the clutch fork. Mostly the mechanic would have done what you asked to be done but as a matter of course he should have tested the clutch operation before handing back the car. I suggest you discuss the problem with him and explain that he hasn't fixed the problem that it came in for.

Apr 05, 2013 | Hyundai Cars & Trucks

1 Answer

My 2000 ford focus does good, til i change into 2nd gear, then from 2nd through 5th gears, it jerks and barely runs. and when it gets real bad, it causes the clutch to slip, what could be the cause of...


So you can race the engine in neutral, and no problem with it trying to die? If that's so, I think you need a clutch job. A clutch disc contaminated with oil or grease will cause jerking and slipping.

Sep 14, 2012 | Ford Focus Cars & Trucks

1 Answer

Can't change gear and very bad smell on 1988 mitsubishi mirage


The sounds like the cluch went bad. the smell and the reason you cant shift gears is due to the clutch. the clutch is burning and thats the smell, when the clutch gets low and slips it smells and sometimes it just blows apart due to wear. have the clutch checked and you will find it needs replacing. hope this is helpful have a good day.

Feb 18, 2012 | 1988 Mitsubishi Mirage

1 Answer

I have a 1995 nissan 4x4 pickup. 4cyl, 5 speed. transmission will not go into gear. it shifts fine into gear but when you let off the clutch it will move maybe an inch before it pops outta gear. the stick...


Could be your clutch slave cylinder is bad,check your clutch fluid,if real low or empty then it is bad,it's located on the side of the transmission with a hydraulic hose connected to it,I have a 85 Nissan 720 4x4 5- speed,had to replace mine a few times.Here's a link on how to do. Repair Guides Clutch Clutch Release Cylinder AutoZone com Here's another link. Repair Guides Clutch Clutch Master Cylinder AutoZone com Here's the new part. Duralast Clutch Slave Cylinder 12425 Read Reviews on Duralast 12425 Your master cylinder probably is good,I just had to change the slave cylinder on mine,unless your's is leaking.If you are in a bind you can add brake fluid,yes it uses brake fluid.Then bleed it then it will get you home,you can get a one man bleeder kit,I have one,here it is. OEM One man brake bleeder kit 25036 Read 17 Reviews on OEM 25036

Jul 19, 2017 | 1994 Nissan Pickup

1 Answer

My 1995 sentra shifts fine in all gears but when i accelerate in 4th or 5th gear it the rpms wind up and the car doednt real respond feels like its in the accelerater do i need a new clutch


Sounds like the clutch is slipping. If the clutch is bad, it will slip in high gears (4th & 5th) but seem to work fine in lower gears. Clutch probably needs replaced but have a mechanic check it out first because it's a fairly expensive job. If your clutch is actuated via a cable (not hydraulic), it may just need adjusting.

Dec 10, 2010 | Nissan Sentra Cars & Trucks

1 Answer

1984 Buick Skylark - 4 cylinder clutch problems


sounds like it needs the clutch replaced. Anytime it slips, it's because it's lose enough material that the pressure plate can't keep enough tension on the clutch plate and the flywheel. Likely, it was slipping and overheated, causing it to smoke(and probably smelled like someone grinding metal with an angle grinder.) This needs a clutch change, throwout bearing, pilot bearing, and a flywheel surfacing. There is no adjustment for these; the play only increases until it slips.

Jul 20, 2010 | 1984 Buick Skylark

2 Answers

95 legacy awd with a slipping clutch


yes the problem is that the pressure plates is getting weak and doesnt keep enuf pressure on the clutch. ive replaced clutch sets on many diff vehicles and when they act like u decribe its usually the pressure plate. replace entire clutch kit and if u decent mechanically u should be able to do it. in a clutch kit they give u a diagram and directions. keep a very good note on what parts u took off where to ensure u put them back in the right place

May 31, 2010 | 1999 Subaru Legacy

Not finding what you are looking for?
2001 Hyundai Elantra Logo

233 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...