Question about 2003 Chevrolet Silverado 1500

1 Answer

ABS light stays on sounds like a abs pump is staying on. Is there a pump for the abs system?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 104 Answers

There is no seperate pump. The following lines will give you more details

Braking force and the tendency of the wheels to lock up are affected by a combination of factors such as the friction coefficient of the road surface, and the difference between the vehicle speed and the road wheel speed. The ABS prevents the road wheels from locking up during heavy braking by controlling the vehicle's brake system hydraulic pressure.
During normal braking, as the rotational speed of the wheel falls, no electric current flows from the ECU to the hydraulic unit. The solenoid valve is not energized. The brake master cylinder hydraulic pressure is applied to the brake unit, and the ABS is not involved. However, even though the ABS is passive during normal braking, its control module is constantly monitoring for rapid deceleration of any of the wheels.
If a wheel-speed sensor signals severe wheel deceleration - which means the wheel is likely to lock up - the ECU sends a current to the hydraulic unit. This energizes the solenoid valve. The action of the valve isolates the brake circuit from the master cylinder. This stops the braking pressure at that wheel from rising, and keeps it constant.
If the sensors signal the wheel is still decelerating too rapidly, the ECU sends a larger current to the hydraulic unit. The armature moves even further and opens the valve. It opens a passage from the brake circuit. Brake fluid is sent from the brake circuit back to the master cylinder. Pressure in the brake caliper circuit is reduced so that the wheel is braked less heavily.
If the wheel sensors indicate that lowering the brake pressure is letting the wheel accelerate again, the ECU stops sending current to the hydraulic unit and de-energizes the solenoid valve. This lets the pressure increase, so that the wheel is again decelerated.
This cycle repeats itself about four to six times per second.
It is normal in an ABS for the valves in the hydraulic control unit to keep changing position as they change the brake pressure that’s being applied. These changes in position may cause rapid pulsations to be felt through the brake pedal.

Posted on Jun 06, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Why does my ABS light stays on and sometimes i get a vibration in the brake petal causing my 2002 Cadillac escalade not wanting to stop?


Sounds like a fault with the Antilock Braking System. The vibration in the pedal is the ABS working. With your foot on the brake pedal, it releases and re-applies the brakes to stop a skid from the wheels locking up. You need professional service for brakes.

Seems to be a known issue on all Cadillac and requires the ABS module to be replaced.

ABS Light Due to ABS Control Module Failure : Cadillac ...

repairpal.com > Problems > Cadillac > DeVille Cadillac DeVille ABS Light Due to ABS Control Module Failure. This is a verified problem based on 126 reports. Learn more about this problem, when it occurs ...

ABS Light Due to ABS Control Module Failure : Cadillac ...

repairpal.com > Problems > Cadillac > Seville STS Traction control and ABS lights stay on dash. This is due to ecbtm Module gone bad. replace Module and this should fix the problem. You can go by the VIN and ...

ABS Light Due to ABS Control Module Failure : Cadillac ...

repairpal.com > Problems > Cadillac > DeVille DTS ABS Light Due to Control Module Failure on Cadillac DeVille DTS. The anti-lock ... ABS and Traction control light stays on. ... abs light to abs control stay on.

ABS Light Due to ABS Control Module Failure : Cadillac ...

repairpal.com > Problems > Cadillac > Seville SLS ABS Light Due to Control Module Failure on Cadillac Seville SLS. The anti-lock brake ... SLS135,000Jumsee. Abs and traction lights stay on when started.

Jan 12, 2016 | Cadillac Cars & Trucks

1 Answer

What does it mean when raction light stays on and thabs light stays on and the traction wont come on on a 1998 lincoln signature series


Its most likely a bad ABS (anti-lock brake system) speed sensor. ABS pump or modulator assembly. When the light is on, your vehicle does not have the benefit of the ABS and traction control features.

Feb 06, 2015 | 1998 Lincoln Town Car

1 Answer

91 Buick park avenue abs light. This happened after my friend was driving down the freeway and his tire blew. Now it just blew the rubber off and he was able to drive t off the freeway on the belts. And...


ABS LIGHT AND MODULE TROUBLESHOOTING:



Anti lock brake system light comes up when there is issue with car brake systems. It can be low brake fluid or faulty ABS fuse or its issue with brake system or assembly. Your vehicles brake system needs inspection.


To troubleshoot these issues, I suggest you to refer the help links provided below. There are direct links with accurate solution, for these specific issues.


Click the link below and follow the procedure: ------


All types of ABS LIGHT / brake problems and repairs

http://howtobyme.blogspot.com/2011/11/abs-and-service-light-comes-on.html

-------------------


ABS light stays on but brakes work fine?

http://howtobyme.blogspot.com/2011/11/abs-light-stays-on-but-brakes-work-fine.html

----------------

VCS and ABS lights go on and off intermittently on Lexus?

http://howtobyme.blogspot.com/2011/11/vcs-and-abs-lights-go-on-and-off.html

-------------

The ABS and Traction Control Lights stays ON dash of car?

http://schematicsdiagram.blogspot.com/2011/06/abs-and-traction-control-lights-stays.html

-------------

ABS & Brake lights warning indicator steady on dash and speedometer not working for Dodge Ram?

http://howtobyme.blogspot.com/2011/11/abs-brake-lights-warning-indicator.html

-----------------------

Battery Light and ABS Light on Dash

http://whoisbyme.blogspot.in/2012/07/battery-light-and-abs-light-on-dash.html

-------------

Sometimes ABS light comes on while Driving?

http://howtobyme.blogspot.com/2011/12/sometimes-abs-light-comes-on-while.html

-----------

How Anti-Lock Brakes Work?

http://technoanswers.blogspot.com/2011/11/how-anti-lock-brakes-work.html

-------------

Brake System Troubleshooting?

http://technoanswers.blogspot.com/2011/11/brake-system-troubleshooting.html

-------------

Anti-lock brake light stays on all the time?

http://technoanswers.blogspot.com/2012/01/anti-lock-brake-light-stays-on-all-time.html

-------------------

ABS light comes on and Car makes Grinding noise?

http://repairhelpcenter.blogspot.com/2012/01/abs-light-comes-on-and-car-makes.html

---------------

ABS trouble codes for all models?

http://repairhelpcenter.blogspot.com/2011/11/abs-trouble-codes-for-all-1994-00-acura.html
------------

2008 Toyota Highlander: ABS warning light Blinking and OBD Error codes Coming?

http://technoanswers.blogspot.in/2012/05/2008-toyota-highlander-abs-warning.html

--------------

2003 Lexus ES: VSC, TRAC OFF, ABS lights ON?

http://technoanswers.blogspot.in/2012/04/2003-lexus-es-vsc-trac-off-abs-lights.html

----------------

2008 Toyota Highlander Hybrid: Warning Lights Abs, Vsc & Brake Are On?

http://technoanswers.blogspot.in/2012/04/2008-toyota-highlander-hybrid-warning.html

-------------

ABS & Brake warning lights remains steady on dash?

http://schematicsdiagram.blogspot.com/2011/12/abs-brake-warning-lights-remains-steady.html

------------

Can I drive the car without ABS fuse connected?

http://schematicsdiagram.blogspot.in/2012/02/can-i-drive-car-without-abs-fuse.html

-----------

Where is ABS/TCS module located on 2005 Cadillac Deville

http://schematicsdiagram.blogspot.com/2011/12/where-is-abstcs-module-located-on-2005.html

------------------

ABS motor keeps running?

http://schematicsdiagram.blogspot.com/2012/01/abs-motor-keeps-running.html

------------

When the car stops, abs pump turns ON?

http://howtobyme.blogspot.com/2011/12/when-car-stopsabs-pump-turns-on.html

-----------

Replacing ABS unit on Buick Century?

http://technoanswers.blogspot.in/2012/02/replacing-abs-unit-on-buick-century.html

----------------

2008 Toyota Tacoma: ABS causes Brake pedal fade?

http://technoanswers.blogspot.in/2012/04/2008-toyota-tacoma-abs-causes-brake.html

--------------

Toyota Camry: Premature ABS Actuation?

http://technoanswers.blogspot.in/2012/04/toyota-camry-premature-abs-actuation.html

-----------

How to replace ABS Modulator Control Unit on Acura Integra?

http://repairhelpcenter.blogspot.in/2011/11/how-to-replace-abs-modulator-control.html

----------------


How to replace ABS Pump Assembly on Acura Integra?

http://repairhelpcenter.blogspot.in/2011/11/how-to-replace-abs-pump-assembly-on.html

-----------


How to remove ABS Accumulator on Acura Integra?

http://repairhelpcenter.blogspot.in/2011/11/how-to-remove-abs-accumulator-on-acura.html

---------


How to remove ABS Control Unit on Acura Integra?

http://repairhelpcenter.blogspot.in/2011/11/how-to-remove-abs-control-unit-on-acura.html

------------

These details will help.

Thanks.

Feb 04, 2013 | Cars & Trucks

1 Answer

Abs and brake light stays on on my 2002 chevy tahoe after raplaceing the abs pump.will these go off automaticly?


Well, it could mean that the emergency brake has not been fully released.The ABS system light is on if something has occurred within the ABS system. Something faulty may have happened there, get it checked out!

Aug 31, 2011 | Chevrolet Tahoe Cars & Trucks

3 Answers

The ABS light stays on, what is that. and do it need immediate assistance.


The ABS light being on will turn off the anti Lock Function. You will only have regular non-ABS braking on your vehicle. O'Reillys Autoparts should scan your system for free, at least you will then know how much it will cost to fix. Hope this helped...

Mar 10, 2011 | 2000 Mercury Grand Marquis

1 Answer

The ABS light stays on whilst driving on a Honda CRV


Hello. This indicates that you have a bad sensor or a problem with the antilock braking system [ABS]. If your brakes no longer pump themselves when you make a quick stop you know that the antilock braking system is not working. If they still pump, the problem is more likely in sensor to the ABS system. Joe

please rate my answer as very helpful. Thank you.

Apr 20, 2010 | 1997 Honda CR-V

1 Answer

My abs light stays on after a few mins of driving and stays on


I would scan it for body codes-eg. ABS codes. Just Brakes wouldn't be my choice for any repairs. Find a good ASE Certified local shop. Discribe the slipping,stalling and shuttering. Sounds more like a trans issue.

Mar 11, 2010 | 1991 Buick Park Avenue

2 Answers

Abs warning light comes on and stays on whilst wv bora 2000 w reg


sounds like the usual ,one of the ring gears on the drive shafts has come loose

Dec 01, 2009 | 1996 Land Rover Discovery

3 Answers

Where is the abs control module located on a 02 chevy avalanche ?


THE EBCM IS BAD this is the electronic control module that is on abs pump. you can replace seperate I think it is around 500 for part

Dec 30, 2008 | 2002 Chevrolet Avalanche

2 Answers

Shows ABS fault on dash and ABS light stays on


Check your abs connectors they might have pulled a wire loose

Nov 11, 2008 | 2004 Chevrolet Colorado

Not finding what you are looking for?
Cars & Trucks Logo

313 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7688 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...