Question about 2002 Mazda MPV

1 Answer

Key removal--will not register it is in Park so that I can remove key or open rear side doors. I removed fuse for directional and hazard signal and can remove key. But this is only temp solution--other than buying piece--300+ dollars--what other solutions??

Posted by on

  • joshjto Jun 16, 2010

    Solution #1--did not work.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Mazda Master
  • 6,826 Answers

Try driving the vehicle about 5 minutes,and activate the antitheft,and then disarm it,see if it will relearn.

Posted on Jun 06, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

None of the blinkers work on my 1996 dodge stratus, all bulbs are good as the park lights and flashers work. I have three dead ports in fusebox under hood.


Guessed it's a V6. Trying to sort this out. If setting the headlamp switch to PARK turns on the park filaments of the front park/turn signal lamp and the tail filaments of the rear tail/stop lamps and the separate tail lamps, the park light circuit is good. If 20A fuse 6 in the power distribution center is OK, the combination flasher in the multifunction switch is receiving power. Power is directed to the turn signal lamps by operation of the turn signal/hazard warning switch. If the turn signals are not flashing, the combination switch may have failed or the turn signal flasher part of the combination flasher may have failed. Finally, the hazard warning switch causes the turn signal elements of the front combination park/turn signal lamps and the rear turn lamps to flash.

Sep 14, 2012 | 1996 Dodge Stratus

1 Answer

How do i remove the driver side rear tail light assembly on a 2000 chrysler voyger


Instructions

Shift your Voyager into "Park," set the parking brake and pull the keys out of the ignition.

Open the liftgate to access the rear storage compartment.

Remove the two screws from the inboard side of the taillight housing and place them in your pocket for safekeeping.

Insert a screwdriver between the outboard side of the rear combination light assembly and the van's body, and then pry the assembly loose. Avoid scratching your van's exterior paint.

Twist the turn signal bulb socket counterclockwise to remove it from the light assembly.

Pull the bulb out of the socket and dispose of it immediately to prevent it from becoming a hazard. Then, install the new bulb in the socket.

Reinstall the socket and activate the turn signal. If it lights up, screw the cover back into place and close the liftgate

Jul 24, 2012 | Chrysler Cars & Trucks

1 Answer

Where is the flasher relay on a 2002 monte carlo


It's part of the hazard switch. have to take trim panel off to replace it .Apply the parking brake.
If the vehicle is equipped with a column shift, position the transaxle shift control indicator to 1.
Adjust the steering wheel for access.
Using a small, flat-bladed tool, gently remove the bezel from the ignition lock cylinder.
For the Impala, remove the right and the left access covers from the instrument panel (IP) fuse block.
For the Monte Carlo, remove the left access cover from the IP fuse block.
Remove the steering column filler. Refer to Steering Column Opening Filler Replacement .
For the Monte Carlo, open the instrument panel compartment door.
Remove the trim plate screws from the IP cluster.
Start at the left side of the IP cluster trim plate. Grasp the trim plate and carefully pull rearward. Disengage the IP cluster trim plate in order to easily access the hazard warning switch
Disconnect the electrical connectors from the hazard warning switch.
Remove the hazard warning switch from the IP cluster trim plate.


13710300-sqgggmolzf4u4c55ip0gdkvq-5-0.jpg It's probably the switch on the steering column ! An not the flasher but you never know without testing .
Turn Signal Lamps and/or Indicators Inoperative
Step
Action
Yes
No
Schematic Reference: Exterior Lights Schematics
1
Did you perform the Lighting System Diagnostic System Check?
Go to Step 2
Go to Diagnostic System Check - Lighting Systems
2
Turn the ignition to the ON position.
Place the turn signal switch to a turn left or a turn right position.
Do the turn signal tamps flash ON and OFF?
Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems
Go to Step 3
3
Disconnect the hazard switch.
Connect a test lamp between the TURN SIGNAL Fuse battery positive voltage circuit and ground.
Does the test lamp illuminate?
Go to Step 4
Go to Step 7
4
Reconnect the hazard switch.
At C201, connect a test lamp between the turn signal flasher supply circuit and ground.
Does the test lamp flash ON and OFF?
Go to Step 5
Go to Step 6
5
At C201, connect a test lamp between the turn signal flasher supply circuit of the hazard switch and inoperative turn signal lamps supply voltage circuit.
Does the test lamp flash ON and OFF?
Go to Step 9
Go to Step 8
6
Test for a high resistance or an open in the turn signal flasher supply circuit. Refer to Wiring Repairs and to Connector Repairs in Wiring Systems.
Did you find and correct the condition?
Go to Step 11
Go to Step 10
7
Repair a high resistance or an open in the TURN SIGNAL Fuse battery positive voltage circuit. Refer to Wiring Repairs and to Connector Repairs in Wiring Systems.
Did you complete the repair?
Go to Step 11
--
8
Repair a high resistance or an open in the turn signal lamps supply voltage circuit. Refer to Wiring Repairs and to Connector Repairs in Wiring Systems.
Did you complete the repair?
Go to Step 11
--
9
Replace the turn signal switch. Refer to Multifunction Turn Signal Lever Replacement - On Vehicle in Steering Wheel and Column.
Did you complete the replacement?
Go to Step 11
--
10
Replace the hazard switch. Refer to Hazard Warning Switch Replacement in Steering Wheel and Column.
Did you complete the replacement?
Go to Step 11
--
11
Operate the system in order to verify the repair.
Did you correct the condition?
System OK
Go to Step 2

Jul 21, 2012 | 2002 Chevrolet Monte Carlo

1 Answer

Can,t get signal or flashers to work on 1997 Dodge Intrepid


I assume you've checked the Fuses :p Obviously that hasnt worked and the bulbs and lights haven't worked either... SO try this????
Open the driver's side door and examine the end of the dash for an access panel. Behind the access panel are fuses and flashers. There are two flashers inside the access panel for controlling the turn signal and the hazard lights. You can distinguish them apart from each other by turning on the hazards or the turn signal and feeling for the clicking. If you turned on the hazards, then the flasher that is clicking is the hazard flasher.
Remove the turn signal flasher from the dash and reinstall the new flasher into the vacated slot in the dash. Close the access panel and start thetruck . Check the turn signals for proper operation and make sure the hazards work as well.


Please let me know how it goes
  • Jan 07, 2012 | Cars & Trucks

    2 Answers

    I have a 1998 chevy suburban. The dome lights don't work. checked fuse box under hood. All good. Are there other fuses on the truck?


    Instrument Panel Fuse Block
    The instrument panel fuse block access door is
    located on the driver side edge of the instrument panel.

    Pull off the cover to access the fuse block.

    The vehicle may not use all of the fuses shown.

    Fuses Usage
    1 Rear Seats
    2 Rear Accessory Power Outlet
    3 Steering Wheel Controls Back light
    4 Driver Door Module
    5 Dome Lamps, Driver Side Turn Signal
    6 Driver Side Turn Signal, Stop lamp
    7 Instrument Panel Back Lighting
    8 Passenger Side Turn Signal, Stop lamp
    9 Passenger Door Module, Driver Unlock
    10 Power Door Lock 2 (Unlock Feature)
    11 Power Door Lock 2 (Lock Feature)
    12 Stop lamps, Centre High Mounted Stop lamp
    13 Rear Climate Controls
    14 Power Mirror
    15 Body Control Module (BCM)
    16 Accessory Power Outlets
    17 Interior Lamps
    18 Power Door Lock 1 (Unlock Feature)
    19 Rear Seat Entertainment
    20 Ultrasonic Rear Parking Assist, Power Liftgate
    21 Power Door Lock 1 (Lock Feature)
    22 Driver Information Centre (DIC)
    23 Rear Wiper
    24 Cooled Seats
    25 Driver Seat Module, Remote Key less Entry System
    26 Driver Power Door Lock (Unlock Feature)

    Aug 23, 2011 | Chevrolet Suburban 2500 Cars & Trucks

    1 Answer

    My turn signals and emergency flashers work some time where is the turn signal flasher relay located and how do you detach it?


    For 1998 Ford Truck Explorer 4WD 4.0L EFI SOHC 6cyl the Flasher is located in front seating area, driver side, behind dash, mounted on steering column.

    Both the turn signal flasher and the hazard warning flasher are mounted on the fuse panel on the truck. To gain access to the fuse panel, remove the cover from the lower edge of the instrument panel below the steering column. First remove the two fasteners from the lower edge of the cover. Then pull the cover downward until the spring clips disengage from the instrument panel.

    The turn signal flasher unit is mounted on the front of the fuse panel, and the hazard warning flasher is mounted on the rear of the fuse panel.

    Hope helps.

    Jan 26, 2011 | 1998 Ford Explorer

    2 Answers

    Where do i find the flasher for the indicator? the left light wont come on even thogh we bought a new bulb


    Flashers and Relays REPLACEMENT Pickups The hazard warning flasher, on the pickup, is located to the left of the steering column, beneath the instrument panel, and is secured by a clamp and one screw. To remove it, simply unplug the electrical connector, loosen the screw, and slide the flasher out of the clamp. The turn signal flasher is located to the right of the steering column, beneath the instrument panel, and is secured in the same way as the hazard flasher. The turn the signal relay is located to the immediate right of the hazard flasher, and is secured by two screws. To remove it, unplug the electrical connector and remove the screws. MPV The relays and flashers are located under the dash, near the fusebox. Navajo Both the turn signal flasher and the hazard warning flasher are mounted on the fuse panel on the truck. To gain access to the fuse panel, remove the cover from the lower edge of the instrument panel below the steering column. First remove the two fasteners from the lower edge of the cover. Then pull the cover downward until the spring clips disengage from the instrument panel. The turn signal flasher unit is mounted on the front of the fuse panel, and the hazard warning flasher is mounted on the rear of the fuse panel. prev.gif next.gif

    Jul 15, 2010 | 1992 Mazda B-Series

    1 Answer

    No turn signals,dash doesn't work


    First check the fuses for signal/hazard lights; From Park Lamp Relay, check the fuse 2 and fuse 3 (15 AMP)

    Second, check the "flasher" for signal lights;

    For last, review your Turn Signal Swtich:
    1. Disconnect and isolate the negative battery cable from the battery.
    2. In order to disarm the air bag system, allow the system capacitor to discharge for at least 2 minutes, before performing any removal procedures.
    3. Remove the upper and lower steering column shrouds.
    4. Disconnect the electrical connector from behind the combination switch.
    5. Remove the mounting screws securing the combination switch to the steering column adapter collar.
    6. Remove the combination switch from the vehicle.
    8344d1d.jpg


    To install:
    1. Install the combination switch to the steering column adapter collar. Tighten the combination switch mounting screws.
    2. Reconnect the electrical connector to the combination switch.
    3. Install the upper and lower steering column shrouds and tighten the retaining screws.
    4. Reconnect the negative battery cable and check all functions of the combination switch for proper operation.

    You can get more details and wiring diagrams in Autozone.com (free register). Good luck.

    Sep 15, 2009 | 2002 Chrysler Town & Country

    1 Answer

    TURN SIGNAL, BRAKE & HAZARD LIGHTS


    No Turn Signal Operation (blinker)The turn signal lights in your car are a basic electrical system that controls the front and rear blinker lights to alert the intended direction of the vehicle. We have listed some of the most common problems and repair troubleshooting tips below:
    Troubleshooting Procedure
    To start troubleshooting this problem:
    • Turn the key to the on position (do not start engine)
    • Inspect the system fuse located in the fuse panel and replace if needed. If you cannot find the location of the blinker fuse consult your owner's manual or an online repair manual
    • When a blinker flasher fails it can cause blinker lights to say on, not blink, or not go on at all. To test the blinker system flasher, remove the flasher unit and insert a jumper wire between the two terminals. If blinker stays on in both directions without blinking, replace the flasher. If you cannot find the location of the blinker flasher consult your owners manual or an online repair manual.
    • 1b7f814.jpg

    Jul 09, 2009 | 1999 GMC Denali

    Not finding what you are looking for?
    2002 Mazda MPV Logo

    Related Topics:

    42 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Mazda Experts

    yadayada
    yadayada

    Level 3 Expert

    76164 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22156 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    8273 Answers

    Are you a Mazda Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...