Question about 2007 Jeep Commander Rocky Mountain

1 Answer

Has power but will not turn over

Jeep has power to dash, radio and lights but will not even attempt to turn over

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 343 Answers

Replace the starter.

Posted on Jun 06, 2010

  • 1 more comment 
  • Greg W.
    Greg W. Jun 06, 2010

    *** Please rate me on this answer.***


  • bekkaboobroo Jun 06, 2010

    Thank You for your help. I am not certain what we did but although all the wires to the batter and fuse boxes felt tight, we loosened them all off and retightened them. It worked and Jeep is now running. Thanks Again!!

  • Greg W.
    Greg W. Jun 06, 2010

    Thank you for reminding me to go back to basics. I should have suggested checking the battery cables first for a loose connection or dirty contact.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2006 jeep comander radio and screen out but cd plyer works, the screen comes and goes.what do you recamend?


A new radio or maybe your local Jeep dealer has a repair service that they can recommend to you.

Dec 06, 2016 | 2006 Jeep Commander

2 Answers

2011 Jeep liberty, wife said her lights on the radio are not working, said she can not see the clock light or stations , but radio still works? I don't think it's a fuse if the radio still plays.


The lights on the radio are dimmed with the instrument panel dimmer control so usually they are fed with a separate 12 volt signal that is separate from the main radio power. It may have a separate fuse but may not. If it's not a fuse it could be a loose connector going to the radio, assuming the rest of the instrument panel lights are working correctly. I suppose it is also possible that the dimmer control has two sections, one for the radio and one for the panel lights, and the section for the radio is bad. Run the dimmer control back and forth stop to stop a few times, push on it etc. to see if that effects it. I suspect it is somewhere in the dimmer circuit.

Sep 17, 2015 | Jeep Cars & Trucks

1 Answer

Have 2007 Jeep GC, v-6, dash lights started flashing and gauge needles swung in full arc, what's cause?


what lights, be clear, there are like 10 or more lights there.
warning lights, illumination?
so the guages stick high, do say what they do and where they end up.?
name all lights that flash,
is car battery charged up? at 12.6vdc rested.

does car start?
does car drive ok>
do headlights work perfectly?
my other shoe drops, do tell all good, bad and ugly and pretend
we are blind, we are.

the cluster you mean the dash is huge thing, with lots of stuff there.
radio is part of dash

the cluster on this jeep is really a stand alone digital display.
it has 2 power pins, and 2 ground pins. for power
and 2 fuses. (are they both good and not loose")
the CLuster brain, is a computer too. as are most modules in this car.
if it has power it boots up with PCM with key turn
and attempts to link up communications with the PCM
and sync, up odometer readings.
and all other indications on the cluster are synced, now.
if you bet comm errors it will do odd things.
but we scan it next.
using any scan tools (even $5 one with canbus)
we scan it and see errors.
i bet you do.
and that, tells you whats wrong.

Feb 19, 2015 | 2007 Jeep Grand Cherokee

1 Answer

My dash lights and my radio stop workin when i was installing a new radio, how can i fix this?


sounds like you have a problem with the power supply. Check the fuse. if ok, remove the new radio and check the power connection to the radio. if you cut into a wire harnis to find a hot 12v connection, you may have severed the dash 12v supply or knocked it loose . Take it slow and retrace your steps, but first check the fuse panel. You may have shorted out a wire without knowing it when attempting the install. lift the pos. lead on you battery the next time you play with 12v.

Sep 18, 2010 | 1994 Jeep Cherokee Country

1 Answer

No power to cab, no power to start, but clock has power


check fuse block for shorts, melting discoloring,on back side of fuse panel around starter relay. loose connection causes fuse block to over heat will need to be replaced.hope this helps.

Oct 29, 2009 | 1997 Chevrolet S-10 Pickup

1 Answer

Dash lights are out


You have all the fuse locations. I have seen some that after radio was put in did that. usually it turns out that re-grounding the dash or using different power supplies for the radio has corrected it. otherwise, I'd check the light switch and make sure it's OK.

Oct 05, 2009 | 1996 Jeep Grand Cherokee

1 Answer

Dash and shifter lights in 1996 jeep cherokee wont light


Hello and welcome to FixYa . Locate the dial that controls the brightness of the dashboardlights. If the control is not immediately evident. Make sure the brightness control is turned on. If it is and the lights aren't working, the problem may be a bad fuse. Check the fuse that controls the dashboard lights Replace the fuse if necessary. If just one part of the instrument panel is not lighting up, then you have either a burned-out bulb or a wiring problem.

Passenger side kick panel fuse breakdown for a 1996 jeep Cherokee Country

01 - 25A Rear Wiper/Washer
02 - 15A Radio, Cigar Lighter
03 - Empty
04 - 15A Passing Light
05 - 30A Blower Motor
06 - 30A (Circuit Breaker) Power Windows
07 - 02A ABS
08 - 20A Turn Signal Flasher
09 - 10A Radio/Clock Memory, Courtesy Lights, Glove Box, Cargo, Dome Lights, Telltales
10 - Empty
11 - 25A Headlamp Delay Module, Horn
12 - Empty
13 - 20A Power Door Locks
14 - Empty
15 - 15A Instrument Panel Lamps, Clock/Radio and Memory, Headlamp Switch, Parking Lamps
16 - 30A (Circuit Breaker) Power Seats, Trailer Tow
17 - 7.5A Instrument Cluster Gauges, Headlamp Delay Module, Chime Module, Overhead Console
18 - 25A Rear Defrost
19 - 05A Instrument Panel Lamps, Radio Illumination
20 - 5.5A (Circuit Breaker) Windshield Wipers and Washers

This should get you going. And you can always Ask Me.

Apr 27, 2009 | 1996 Jeep Grand Cherokee

1 Answer

Brand new...100 miles on it, but what happened?!


cant tell you whats wrong. obovously some kind of wiring issue. but DOCUMENT DOCUMENT DOCUMENT and take it to the dealer every time for warranty issues!!! If they cant fix it you can lemon it out after 3 failed attempts. i found a free lemon lawyer online and lemoned out a '04 blazer for a leak that started right after i bought it. i think problems have to start within the first 2000 miles so you are well within that restriction!!!!

Jun 25, 2008 | 2008 Jeep Wrangler

Not finding what you are looking for?
2007 Jeep Commander Rocky Mountain Logo

189 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...