Question about 1994 Ford Crown Victoria

1 Answer

Where is the crank sensor location on a 1994 crown vic 4.6L

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 4,669 Answers

Behind the A/C compressor. You don't have to remove the lines from the compressor but you have to unbolt the compressor to remove the sensor.

Posted on Jun 06, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hello? Emission problem 1994 crown vic here...


I owned one of these. There is a groove under the butterfly horn of the throttle. There are 8 bolts and a $10 gasket. Often the EGR passage is clogged and it throws off the calibrations and when you clean this groove the engine will run much better.

Jul 21, 2014 | 1994 Ford Crown Victoria

1 Answer

1994 ford crown vic front pass. side power window regulator...


Yes it is. They will need to be drilled out. Thats the best way, some people try to put bolts on, but I dont advise it.

May 12, 2010 | 1994 Ford Crown Victoria

1 Answer

1994 crown vic, not PI, is not charging. Put in


there is a alternator fuse on the relay center under the hood that is a large fuse rated i think at like 140 amps check it it probably blew

Feb 07, 2010 | 1994 Ford Crown Victoria

1 Answer

Rear and interior dashboard lights don't work 1994 Crown Vic.


Easy stuff first. Try replacing the #9 fuse on the interior fuse panel. This fuse protects the instrument panel, license, parking and tail light circuits. The panel is located under the dash to the left of the steering column. You will need to pry off the cover on the panel to access the fuses. The fuse you want is a 15 amp fuse located directly under the turn signal flasher. It should be easy to figure out which fuse it is because it will be 'blown' or open. This is easy to determine just by looking at the fuse once it's removed. And, if you aren't sure what's what, I'm sure you can find a diagram of this fuse panel somewhere on the Internets if you look around a little. I took this info out of the Owner Manual from my own '94 Vic. If this doesn't solve the problem I would suggest taking your Vic to a shop and letting them take a look at it.

Dec 19, 2009 | 1994 Ford Crown Victoria

1 Answer

Where is the heater core located at in a 1994 Ford Crown Vic and how do you get to it?


Underneath the dash. There is a lot of disassembly required. This is not a do-it-yourself project.

Oct 18, 2009 | 1994 Ford Crown Victoria

1 Answer

Car won't start


kinda sounds like that inexpensive $21.00 crank positioning sensor. I have a 94 also

Mar 06, 2009 | 1994 Ford Crown Victoria

1 Answer

2003 Crown Vic Misfiring after acceleration


I just came up with that exact issue in my 2003 with 98K police crown vic. And the last time I had this issue in a 2001 police Crown vic it was the crank shaft position sensor. A $20 part and about 30 mins to put it in. located near the bottom of the engine. I had to un bolt the A/C compressor and push it out of the way a few inches to get to the sensor. If you have about 100K mile on it and its an idled heavy police car, this sensor should be changed out anyway. It can leave you on the road dead and some dealers have a hard time find out whats wrong as the OBD 2 does not see it as a problem when it goes bad or becomes touchy as I think mine is.

Jan 12, 2009 | 2007 Ford Crown Victoria LX Sedan

Not finding what you are looking for?
1994 Ford Crown Victoria Logo

Related Topics:

247 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...