Question about 1994 Ford Bronco

1 Answer

I need to know why after placing the manual trnsfer case, slips out of 4L when creeping, if I give it a bit of gas pedal, it just pops out of gear. Also, I need to know if I did this correctly, I place the trans in N, get out, lock the hubs in, then drop it into 4H, am I doing that right?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 218 Answers

It take the hub's about ten feet of movement to ingage, the transfer case sound's like it's not ingaging the gear's for enough, this can be from the shift linkage not being propoly adjusted

Posted on Jun 06, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Pops while pushing the gas back fires smells like gas shakes while pressing the gas on 91 jeep cherokee l 4.0


Pops, while pushing the gas pedal, and back fires and smells like gas and shakes while pressing the gaspedal, on 91 jeep cherokee l 4.0
spark timing way off. or burned valves.
i dont think a 4L can change cam timing. (gears)
that is gross misfire,
so bad it backfires to the throttle body and air cleaner
in all cases is bad spark timing, or worse burned valves.
bad rotor & cap,?
doing a tune up get rid of that carbon tracked bad cap.
and timing magically works.
ever do a full tune up this decade or in last 60,ooo miles>
?

Feb 15, 2015 | Jeep Cars & Trucks

1 Answer

2000 ford expedition AWD locked in 4L


AS TO THE FIRST Q, SOMETIMES PUTTING THE TRUCK IN REVERSE AND DRIVING A FEW YARDS WITH IT IN 2WD OFTEN TAKES IT OUT OF 4WD

Mar 27, 2014 | Ford Expedition Cars & Trucks

1 Answer

1990 jeep pops and you've gotta put it in neutral, stop, then back in gear, if you give it too much gas go REALLY easy and it got me home... transmission/transfer case/rear axle ???


Does it do this in any specific gear or all of them ? If it is just 5th gear it is a somewhat common problem that I have seen. The transmission should be rebuilt or replaced.

Dec 05, 2011 | 1990 Jeep Wrangler

1 Answer

HOW TO SHIFT TO 4 WHEEL DRIVE


Hi - Here is instruction how to do.

From N to 4H

Stop the vehicle completely, place the

transmission in "N" (Neutral) and depress

the brake pedal and the clutch pedal fully

(if equipped), then push in and turn the

switch to shift into "4H".

From 4H to 4H LOCK

You can operate the transfer switch either

when the vehicle is stopped or while the

vehicle is moving.

Position the front wheels straight ahead

and turn the switch to shift into "4H LOCK".

If the vehicle is moving, we recommend

that the speed be less than 100 km/h (60

mph) during this operation.

NOTE:

• When shifting between the transfer

switch position and the transfer gear

position is unmatched, all 4WD indicators

will blink and the buzzer will sound.

• If it is difficult to shift between "4H" and

"4H LOCK" while the vehicle is moving,

try accelerating and decelerating your

vehicle several times after turning the

transfer switch. Be sure to wait until traffic

conditions allow you to accelerate and

decelerate safety before using this procedure.

From 4H LOCK to 4L LOCK

Stop the vehicle completely, place the

transmission in "N" (Neutral) and depress

the brake pedal and the clutch pedal fully

(if equipped), then push in and turn the

switch to shift into "4L LOCK".

From 4L LOCK to 4H LOCK

Stop the vehicle completely, place the

transmission in "N" (Neutral) and depress

the brake pedal and the clutch pedal fully

(if equipped), then push in and turn the

switch to shift into "4H LOCK".

From 4H LOCK to 4H

You can operate the transfer switch either

when the vehicle is stopped or while the

vehicle is moving.

Position the front wheels straight ahead

and turn the switch to shift into "4H". If the

vehicle is moving, we recommend that the

speed be less than 100 km/h (60 mph) during

this operation.

NOTE:

• When shifting between the transfer

switch position and the transfer gear

position is unmatched, all 4WD indicators

will blink and the buzzer will sound.

• If it is difficult to shift between "4H" and

"4H LOCK" while the vehicle is moving,

try accelerating and decelerating your

vehicle several times after turning the

transfer switch. Be sure to wait until traffic

conditions allow you to accelerate and

decelerate safety before using this procedure.

From 4H to N

64J209

Stop the vehicle completely, place the

transmission in "N" (Neutral) and depress

the brake pedal and the clutch pedal fully

(if equipped), then push in and turn the

switch to the mark (1) at the left of the "N"
position, and hold the switch in this posi-

tion for 5 seconds until the "N" indicator

blinks, then turn the switch to the "N" position.

When you turn the transfer switch to the

"N" position, "N" indicator will come on with

the buzzer sound.

CAUTION

• Be sure to stop the vehicle completely

before operating the transfer

switch to shift between "N" and

"4H", or between "4H LOCK" and

"4L LOCK".

• Do not shift between "4H" and "4H

LOCK" unless the front wheels are

in the straight-ahead position and

we recommend that the vehicle

speed be less than 100 km/h (60

mph).

Do not operate the transfer switch

while tires are racing.

• Do not operate your vehicle in "4H

LOCK" or "4L LOCK" on dry, hard

surfaces.

(Continued)

CAUTION

(Continued)

• Do not operate the vehicle while a

4WD mode indicator is blinking

except when shifting between "4H"

and "4L LOCK".

If you operate the vehicle while a

4WD mode indicator is blinking, a

buzzer will sound and the transfer

will shift to "N" (Neutral) to prevent

transfer case damage.

In this case, use the following procedure.

1) Depress the clutch pedal fully (if

equipped) or shift the automatic

transmission gearshift lever to the

"N" position.

2) Turn the transfer switch to the

position previously selected.
3) Operate the transfer switch again.

Feb 01, 2011 | 2007 Suzuki Grand Vitara 4WD

1 Answer

My car is at a lost for power going up hills


Have you ignition timing checked. It seems you have a retarted ignition timing.

May 29, 2009 | 1989 Toyota Corolla 2 Door

1 Answer

1998/99 Dodge Dakota clutch and manual transmission problems


clutch needing replaced, very common on all manuals

pedal travel adjustment,yes
gear shift adjustment,no

May 12, 2009 | 1998 Dodge Dakota

1 Answer

I need to know what ratio the axle in a 2006 f-350 has in it. i can not find the decoder....HELP PLEASE


The following lists the gear ratios on rear axles.
  • 37 — 3.73 non-limited slip
  • 3L — 3.73 limited slip
  • 41 — 4.10 non-limited slip
  • 43 — 4.30 non-limited slip
  • 48 — 4.88 non-limited slip
  • 4L — 4.30 limited slip
  • 4N — 4.10 limited slip
  • 4W — 4.10 limited slip (ambulance package)
  • 53 — 5.38 non-limited slip
  • 5L — 5.38 limited slip
  • 8L — 4.88 limited slip

Feb 01, 2009 | 2006 Ford F 350 Super Duty

2 Answers

'94 Ford Ranger XLT Manual Transmission Problem?


For the information given, and assuming forr a 94 it has a bunch of miles, I would bet on a slipping clutch along with a pressure plate that is glazed over. I doubt the transfer case, that's just a chain drive mechanism with nothing much to slip in there. In 2 wheel drive the transfer case drives pretty much straight through and shouldn't add to the problem.

If the clutch has over 80K on it, replace and resurface the pressure plate at the same time.

Does the clutch pedal have about 1/4" of play before it begins to engage? If not adjust the clutch play 1st and see if that helps.

Let me know if you have a further symptoms to share.

Doug

Nov 15, 2008 | 1994 Ford Ranger Supercab

Not finding what you are looking for?
1994 Ford Bronco Logo

84 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...