Question about 1978 Ford Granada

1 Answer

I need to replace the key ignition assembly of a ford 1978 and have everthing tore apart but still can not get the old one out? This is a motor home with a tilted wheel, lost the keys and in the middle of trying to get the old one out, any last tips would be greatful

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 6,826 Answers

If there is not a screw to remove,then there is a slot,that you have to push in with a small punch,and pull out on the lock and cylinder.Let me know if you need more advice,I am glad to help.Look at the new one You will see the part that has to be pushed in,like I said,if it does not have one,the new lock and cylinder will have a place made on it,you will see,that is gouged out sort of,that is where the screw would go threw if it has one,if not,it will have the push in type release.

Posted on Jun 05, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I remove the ignition lock cylinder on my 2000 ford Fleetwood tiago motor home


There is a nut or screw on the back of the lock cylinder, unscrew it, but have your key in the front of the cylinder first so it doesn't fall apart on you. Then turn the key one way or the other and it will come out, make the wafers are where you can see them as you pull the key out. Good Luck

Dec 29, 2015 | Ford Cars & Trucks

1 Answer

Ignition key assemble removal


Is the transmission for REAL locked in "Park"? You may need to pull apart the steering column to verify the interlock linkage between the shifter lever and the key cylinder.

Aug 07, 2014 | 1998 Ford Escort

1 Answer

Wipers won't move but motor still runs, bar moves but not wipers, how do I fix it?


It sounds like you need to replace the wiper transmission assembly which is common. For a while it only came in a complete assembly including the motor and everthing but I think now you can get the transmission assembly by itself.

Apr 17, 2011 | 2000 Ford Expedition

2 Answers

I have to replace a ignition cylinder switch on a ford zx2 escort key is broke off in the ignition and want turn even with the other haft of the key


Sounds like you will need to replace your ignition key switch.Recommending a used one at local auto wreckers most inexpensive route to go.

Dec 19, 2010 | 2001 Ford Escort ZX2

1 Answer

Can not remove old key sw the blade part is stuck in


A quick simple solution would be to try to start the car by sticking a flat-head screw driver like a key. A more expensive solution would be to find another ignition assembly with key from a junk yard and replace the whole thing. An even more expensive option would be to buy the ignition assembly and keys from a parts store or from the nearest Ford dealership. Hopefully this helps to FixYa problem!

Oct 11, 2010 | 1985 Ford F150

1 Answer

Key cut for 97 ford f150


If you already have a key bring it to walmart. If you dont, take apart your ignition assembly and get the part that the key goes into and bring it to a lock smith. They are usually very good at making keys.

Jul 28, 2009 | 1998 Ford F150 Regular Cab

1 Answer

1992 bmw ignition lock assembly replacement


BMW ignition lock replacing.

According to manual no special tools needed. here procedure!

  1. Ignition elec switch. Disconnect battery. 2. remove trimpanel from lower leftside of instrument panel. remove screw retaining lower steering column and remove cove. 3. remove slotted screws on both side of switch. 4. relase tabs and remove switch from elec harnass and remove sealer.. note: before mating new ignition elec switch check that switch is in correct position. seal screws again.
  2. Ignition lock cylinder replacing. 1. insert master key and turn 60 deg to radio position. 2. inset piece of stiff wire into opening in lock cylinder and pull cylinder out. (Note early models up to 10/95 turn lock cylinder back 12 deg to release)

Jun 13, 2009 | 1992 BMW 3 Series

1 Answer

Swapped a 1978 f100 complete drivetrain into a1971 f100 ranger .


you dont need to splice the harness ,look closely every thing will plug in you just need to take the distributor from the old motor and put it in the implant motor...if thier different motors get one from a wrecker that is the same year as the truck and put it in the implant motor

Mar 30, 2009 | 1981 Ford F 100

1 Answer

How to change inginition?


if you have an original replacement key assembly, then all you have to do is remove the old key assembly, transfer the rear electrical ignition switch to the new key assembly and your done.

no need to transfer or solder any wire. if you have a replacement part which is not an original, then it would be very difficult to trace the wires unless you have a knowledge in voltage testing and using a volt meter.

tnx 4 using fixya,

drcool

Oct 05, 2008 | 1989 Ford F 350

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

72 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5467 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...