Question about 1995 Jeep Grand Cherokee

1 Answer

1995 4.0 4x4 jeep grand Cherokee Laredo blinking check engine code 38-55

Posted by on

  • Mark Lewis
    Mark Lewis Jun 05, 2010

    The Code 55 that blinked for you, means "end of diagnostic sequence." I went through my Factory Service Manual and could not find ANY Code 38. Code 55 is a normal code, yet perhaps you should re-check the Code 38. There are fault codes for a Code 37, but as of yet, no codes from Chrysler that are a 38. Let me know if I can help should it not be a Code 38...55 is always going to be there and is not a fault code other than to tell you the "computer" has finished it's diagnostic sequence. Good Luck, "00 Buck"

  • jeffguibor Jun 05, 2010

    Thank you 00 Buck, I will go and check the codes again,i am sure of the 55.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 553 Answers

Sorry I can't find a code 38 for '95 Jeeps in any of the data bases.
55 - End of codes

Posted on Jun 07, 2010

  • scrambled58
    scrambled58 Apr 14, 2012

    have that same code 38 on a 96 Grand Cherokee

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I HAVE TO CHANGE OUT A CRANK SENSOR IN MY GRAND CHEROKEE.


Jeep Crank Sensor Replacement, P Codes P0351, P1391 ...

? 6:24
www.youtube.com/watch?v=7D0vUEDSwXo
May 12, 2013 - Uploaded by Robert DIY Replaced the crank sensor on this 2003 Jeep Grand Cherokee.... to replace my crankshaft position sensor on my 1998 grand cherokee laredo.

Jeep Crankshaft Position Sensor Replacement (CKP, CKPS ...

? 4:07
www.youtube.com/watch?v=1Ho5iAKQV00

Oct 27, 2013 - Uploaded by WeekendHandymen
hi , do you think if I replace crank sensor will solve the problem ,my jeep .... Where's the crankshaft located in 99 jeep grand Cherokee laredo .


Oct 24, 2015 | Cars & Trucks

1 Answer

How does one add transmission fluid to 1995 jeep grand cherokee laredo?


Look for the dipstick where you check the transmision fluid level. If you need any you pour it down the dipstick hole. Add it in small amounts and check in between additions, its really easy to overfill. Once overfilled a real pain to get it out.

Aug 30, 2014 | 1995 Jeep Grand Cherokee

1 Answer

Purge valve engine code


check the number 10 fuse should be a 15a but it says open in th emanual but it was not on mine see link
http://dorisong.com/poolsideinsouthcove/1999-jeep-grand-cherokee-laredo-fuse-diagram-20.jpg

Mar 26, 2012 | 1999 Jeep Grand Cherokee

2 Answers

01 Jeep grand cherokee laredo won't start. No fire is going to engine. Changed spark plugs but didn't help at all


you might want to check you cam shaft sensor amd also there is a different sensor under the distutor i had to replace both of these on my 95 jeep grand cherokee laredo

Dec 04, 2010 | 2001 Jeep Grand Cherokee

1 Answer

My 2003 jeep grand cherokee laredo keeps killing on me. The check engine light comes on and the car kind of coughs. It will then idol down and kill. After a few starts the light goes off and the car runs...


This could be a number of things,have the codes read to find out what the codes say,this will help in the diagnoses,auto zone can do this for free.

May 10, 2010 | 2003 Jeep Grand Cherokee

1 Answer

I have a 2006 Cherokee Jeep Laredo. Recently had


its probly the 02 sensor. u can get it checked 4 codes @ a mechanics shop. or dodge dealer

Feb 15, 2010 | 2006 Jeep Grand Cherokee

1 Answer

1993 JEEP GRAND CHEROKEE LAREDO- TRUCK WONT


OK...I have a 93 outside...one diagram I have shows an ignition module next to coil...but there is none on mine, (4.0 engine)
Two items to check are crank sensor and cam sensor inside distributor. Test procedure can be found in just about any manual including haynes.
You will need a decent volt/ohm meter to do testing. You can also check codes by turning ignition switch on/off three times, leaving it on the third time. Check engine will flash code #'s (ex: one flash, pause two flashes= the number twelve.then followed by a longer pause then another set of flashes etc.)

Mar 05, 2009 | 1993 Jeep Grand Cherokee

Not finding what you are looking for?
1995 Jeep Grand Cherokee Logo

Related Topics:

434 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...