Question about 2005 Ford Explorer
If the ac is working correctly,then the temp door actuator motor is the problem,it is located on top of the blower box,open the glove box,and remove the keepers to allow the door on the glove box to lay down,look up,and to the left,towards the drivers side,on top of the blower box there is a flat looking box with a wire connector ,with multi wires on the connector.It has three screws holding it to the blower box,the rear one will be a pickle to remove.The actuator motor has to be replaced to fix the problem.
Posted on Jun 05, 2010
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Sounds like your temperature actuator is not moving or your temp door is broken. On max a-c ,coolant is shut off to your heater core allowing only cold air in.
Posted on Jan 26, 2009
It could be the dccv or the evap. discharge sensor,driver's temp sensor or pass temp sensor. Without hooking up a tester to read pids there is no way to tell. I would recommend going to someone that has the ids tester to read pids. good luck.
Posted on Aug 01, 2009
heater control valve..heater core clogged ..circulation to heater control valve weak restricted or closed..do a radiator flush and fill thoroughly backflushing the heater lines with heater open all the way...if no smell or leaks inside cabin passenger area or losing coolant you should fix teh problem... other issue could be control head not opening blend doors properly
Posted on Jan 13, 2009
the next thing to check would be the selector motors, these motors are what move door to get floor or defrost or vent air and also hot/cold air, look under the dash try to find them, there bolted to heater box,there are 3, locate one by one then move every control and watch to see linkage move find the one that doesnt move and thats your problem, hope this helps.heres a picture to help you know what it looks like.
Posted on Jan 20, 2010
Tips for a great answer:
Dec 29, 2013 | 1999 Ford Expedition
Aug 25, 2012 | 2005 Ford Explorer
Feb 15, 2011 | 2005 Ford Explorer
Jan 09, 2011 | 2005 Ford Explorer
Jan 20, 2010 | 2005 Ford Explorer
Dec 26, 2009 | 2002 Ford Explorer
Oct 10, 2009 | 2005 Ford Explorer
May 08, 2009 | Ford Explorer Cars & Trucks
Feb 06, 2009 | 2005 Ford Explorer
Jan 16, 2009 | 1999 Ford Explorer
1,291 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: