Question about 2007 Hyundai Entourage Limited Minivan
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Yes I do i am a specialist for the Scion tC and its 2.4L power plant if you need this diagram please email me at 08TurboScion@comcast.net
Chad Buckwalter, Master Toyota/Scion Performance Technician
Posted on Jul 21, 2008
get the belt routing from the local dealer.
they will not charge alot of money for a reprint from the factory service manual.
dayco belts come with the belt routing on the box.
Posted on May 28, 2009
Drive Belt: Service and Repair
1. REMOVE V-BANK COVER SUB-ASSEMBLY
2. REMOVE NO. 1 ENGINE UNDER COVER
3. REMOVE FAN AND GENERATOR V BELT
(a) While turning the belt tensioner counterclockwise, align the service hole for the belt tensioner and the belt tensioner fixing position, and
then insert a bar of [diameter]5 mm (0.197 in.) into the service hole to fix the belt tensioner in place.
HINT: The pulley bolt for the belt tensioner has a left-hand thread.
(b) Remove the V belt.
1. INSTALL FAN AND GENERATOR V BELT
(a) Set the V belt onto every part.
(b) While turning the belt tensioner counterclockwise, remove the pin.
NOTICE: Make sure that the V belt is properly set to each pulley.
(c) After installing the belt, check that it fits properly in the ribbed grooves.
HINT: Make sure to check by hand that the belt has not slipped out of the grooves on the bottom of the pulley.
2. INSTALL NO. 1 ENGINE UNDER COVER
3. INSTALL V-BANK COVER SUB-ASSEMBLY
Posted on Sep 30, 2009
Serpentine belts typically last approximately 4 years or 40,000 miles.If you have put that many miles on in two years, it may be time.
If you trust your mechanic, follow his/her advice and replace it. If not, get a 2nd opinion.
You also may want to confirm it is the serpentine belt and not the timing belt. The timing belt is very important to keep maintained!
Posted on Nov 01, 2009
4 cylinder diagram
6 cylinder diagram
Loosen the tensioner pulley to remove the belt. It is the one that has a long bolt running through it. Once you remove the old belt, install the new one using the appropriate diagram from the above two links. Readjust the tension using the bolt you loosened to remove the old belt.
i hope this helps
Posted on Nov 20, 2009
Tips for a great answer:
Sep 09, 2016 | 2007 Toyota Camry
Jan 27, 2016 | Toyota Cars & Trucks
Jan 07, 2015 | 2007 Hyundai Entourage Limited Minivan
Jul 22, 2014 | 2007 Hyundai Entourage Limited Minivan
For water pump replacement i suggest you to check the help link
click the link below :----
Water pump replacing procedure for all vehicles?
HOW TO REPLACE A WATER PUMP
How to route Water Pump Belt for 1992 Oldsmobile ?
How to replace Water Pump on Car ?
How to Remove Water Pump?
Where is Water Pump located ?
This will help. Thanks.
Feb 01, 2012 | 2007 Hyundai Entourage Limited Minivan
Dec 31, 2011 | 2007 Mercedes-Benz R350
Jan 17, 2010 | 2007 Hyundai Entourage Limited Minivan
Oct 17, 2009 | 2007 Pontiac Grand Prix GXP Sedan
Jun 10, 2008 | 2007 BMW 525xi Sedan
Sep 13, 2015 | 2007 Hyundai Entourage Limited Minivan
1,123 people viewed this question
Usually answered in minutes!