Question about 2000 Jeep Wrangler

1 Answer

2000 jeep wrangler will not start from the key switch, can start the jeep by jumpering the starter, have replaced the key switch, the ignition relay, and the ignition circuit braker.

Posted by on

  • Richard Scordino Jun 05, 2010

    ignition relay or starter relay?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 553 Answers

It sounds like you have a bad neutral safety switch or your linkage is worn enough that it's not registering properly.

Posted on Jun 07, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

For 1992 Wrangler, manual transmission, able to jumper across the hot and start connections on the solenoid to start the truck, but nothing when the key is turned.


The problem is in your ignition switch. The ignition switch is in the steering column. It is just inside or under the dash. The ignition switch is not sending power to the starter solenoid.

Oct 02, 2010 | 1992 Jeep Wrangler

1 Answer

1994 jeep wrangler 6 cyl 5 spd no start


have u ck out the ignition switch [not the key & tumblers],, or the neutral safety switch to see if u have power ,,also seen broken wire at solenoid on starter too,,hope it helped,,

Apr 05, 2010 | 1994 Jeep Wrangler

2 Answers

1995 Jeep Wrangler 2.5L Fuel Pump/Check engine light


Could be one of several items...I'd check the fuel pump relay, auto shutdown relay and the ignition switch itself. I'd bet on it being one of those relays but, we all have been fooled at least once!!! I'd also make sure that body and engine grounding is good and clean. Relays can't work properly without a good ground.

Nov 03, 2009 | 1995 Jeep Wrangler

2 Answers

2000 jeep wrangler - starts and then will die while driving. Battery replaced, starter replaced, alternator checks out okay. Could it be the solenoid?


The solenoid causes the starter to engage when the ignition switch is turned to start. If the car starts, the solenoid is probably okay.

Sounds more like a fuel delivery problem.

Oct 21, 2009 | 2000 Jeep Wrangler

2 Answers

2004 jeep wrangler unlimited wont start ,4.0l auto , new starter and battery , when turn the key lights come on fuel pump lights in dash.


Nuetral safty switch, Starter solenoid.
Do you have antitheft?
The ground for the starter relay may be computer controlled. Lee

Oct 04, 2009 | 2007 Jeep Wrangler Unlimited Rubicon 2...

4 Answers

2006 Jeep Wrangler won't start


First, make sure you can turn the engine by hand. If you can't then the starter can't turn it either. Have someone else turn the key and look for the source of the click...may be a relay. Go over the starting circuit with a volt meter. Check for power at the starter main terminal and then with the key turned to "start" check for power at the trigger terminal on the starter. Check battery voltage and check relay operation.
You have a neutral safety switch on the transmission if its an automatic and a clutch switch if it's a stick. Check them as well. Make sure battery grounding on fender and block are also clean and secure.

Oct 01, 2009 | 2006 Jeep Wrangler

2 Answers

Engine will not turnover


If there is no power coming IN to the starter relay - the ignition module has failed.
Replace the Ignition.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

Sep 24, 2009 | 2008 Jeep Wrangler

4 Answers

My 91 jeep won't start...


The Starter relay is bad.

May 05, 2009 | 1991 Jeep Wrangler

Not finding what you are looking for?
2000 Jeep Wrangler Logo

855 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...